Intermatic Digital 7-Day Programmable Wall Switch Timer SS7C User Manual

Hyrje

The Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer is designed to control lighting and heavy-duty loads such as fans and appliances. This timer offers precise control with up to six ON/OFF settings per day, totaling 42 settings per week. It features a digital clock, battery backup, and various programming options to suit your schedule.

Informacioni i Sigurisë

PARALAJMËRIM: Risk of electric shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. If you are unsure about any part of these instructions, consult a qualified electrician. Do not exceed the electrical ratings of the device.

• Sigurohuni që energjia të jetë shkëputur përpara instalimit.
• Ndiqni të gjitha kodet elektrike lokale dhe kombëtare.
• Kjo pajisje është vetëm për përdorim të brendshëm.

Përmbajtja e paketës

Sigurohuni që të gjithë përbërësit janë të pranishëm para se të filloni instalimin:

• Intermatic SS7C Digital Wall Switch Timer Unit
• Vida montimi
• Arra teli
• Manual udhëzimi (ky dokument)

Konfigurimi dhe instalimi

Mjetet e nevojshme: Screwdriver, Wire Strippers, Electrical Tape.

1. Fikni energjinë: Locate the circuit breaker or fuse that controls the power to the switch you are replacing. Turn it OFF. Verify power is off using a voltage testues.
2. Hiq çelësin ekzistues: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch. Note the wiring configuration (e.g., line, load, ground).
3. Wire the SS7C Timer: Connect the wires from the wall box to the SS7C timer using the provided wire nuts. Refer to the wiring diagram below for typical connections. Ensure all connections are secure.
   

   Imazhi: Përpara view of the Intermatic SS7C Digital Wall Switch Timer. This image shows the digital display and control buttons, which are essential for programming and operation.

   • Tel Line: Connect to the timer's LINE terminal.
   • Teli i ngarkimit: Connect to the timer's LOAD terminal.
   • Teli tokësor: Connect to the timer's GROUND terminal.
   • Neutral Wire (if applicable): Some installations may require a neutral wire. Consult your local electrical codes.
4. Montoni kohëmatësin: Gently push the wired timer into the wall box. Secure it with the mounting screws. Attach the wall plate.
5. Rivendosni energjinë: Turn the power back ON at the circuit breaker or fuse box. The timer display should illuminate.

Operacioni dhe Programimi

The SS7C timer allows for flexible programming with up to 6 ON/OFF settings per day.

1. Vendosja e orës dhe ditës aktuale

1. Shtypni ORË butoni. Ekrani i kohës do të pulsojë.
2. Përdorni ORË dhe MINUTE butonat për të rregulluar kohën aktuale.
3. Shtypni DITA butonin për të vendosur ditën aktuale të javës.
4. Shtypni ORË again to save and exit, or wait a few seconds for it to save automatically.

2. Programming ON/OFF Events

The timer supports up to 6 ON/OFF programs per day, for a total of 42 per week.

1. Shtypni PROG button. The display will show "1 ON".
2. Përdorni ORË, MINUTE, dhe DITA buttons to set the desired ON time and day(s) for Program 1. You can select specific days (e.g., M, Tu, W, Th, F, Sa, Su), weekdays (M-F), weekends (Sa-Su), or all 7 days.
3. Shtypni PROG përsëri. Ekrani do të shfaqë "1 OFF".
4. Set the desired OFF time and day(s) for Program 1 using the ORË, MINUTE, dhe DITA butonat.
5. Repeat steps 1-4 for additional programs (2 ON/OFF through 6 ON/OFF).
6. After setting all desired programs, press ORË për t'u kthyer në funksionimin normal.

3. Anulimi manual

To manually turn the connected device ON or OFF outside of programmed times, press the ON/FIKUR button. This will temporarily override the current program until the next scheduled ON or OFF event.

4. Random Setting Feature

The random setting feature can be activated to vary ON/OFF times slightly, creating a lived-in appearance when you are away. Consult the full manual for specific activation steps for the random feature.

Mirëmbajtja

The Intermatic SS7C timer is designed for low maintenance. The internal battery backup maintains programming for up to three years, even during power failures.

• Ndërrimi i baterisë: If the display becomes dim or programming is lost frequently during power outages, the internal battery may need replacement. This typically requires professional servicing or careful adherence to specific instructions not detailed here.
• Pastrimi: Clean the timer's surface with a soft, damp pëlhurë. Mos përdorni pastrues gërryes ose tretës.

Zgjidhja e problemeve

Specifikimet

• Marka: Intermatike
• Numri i modelit: SS7C
• Pesha e artikullit: 0.35 paund
• Numri i cilësimeve: 7-day programmable, up to 6 ON/OFF settings per day (42 per week)
• Madhësia e ekranit: 1.5 inç
• Ngjyra: E bardha
• Prodhuesi: INTERMATIC INC
• UPC: 078275056732
• ASIN: B0000BYDA2

Garancia dhe Mbështetja

This Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer comes with a Garanci e kufizuar e prodhuesit 1-vjeçare nga data e blerjes. Kjo garanci mbulon defektet në materiale dhe mjeshtëri gjatë përdorimit normal.

For warranty claims, technical assistance, or further support, please contact Intermatic customer service. Keep your proof of purchase for warranty validation.

For the most up-to-date support information, please visit the official Intermatic webfaqe interneti ose referojuni detajeve të kontaktit të dhëna me paketimin e produktit tuaj.