RAB Lighting FFLED39 Future Flood LED Light User Manual

1. Produkti i Mbaruarview

The RAB Lighting FFLED39 Future Flood LED Light is a high-performance, energy-efficient outdoor floodlight designed for various applications. This hardwired fixture features a durable bronze finish and provides cool white illumination.

Figure 1: RAB Lighting FFLED39 Future Flood LED Light

Karakteristikat kryesore:

• Fuqia: 39-watt LED
• Temperatura e ngjyrave: 5100K E bardhë e ftohtë
• Jetëgjatësia: 100,000 hours based on LM-80 tests
• LEDs: Three multi-chip 13-watt high-performance LEDs
• Optika: NEMA type 7H x 6V with Air-flow technology heatsink
• Reflektori: Semi-specular anodized aluminum
• Guarnicionet: Silikoni me temperaturë të lartë
• Përfundo: Bronze chip and fade-resistant polyester powder coat
• Vëlltage: 120-volt to 277-volt operation

2. Informacion mbi sigurinë

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• Siguria elektrike: Installation must be performed by a qualified electrician in accordance with all national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or servicing.
• Tokëzimi: The fixture must be properly grounded to prevent potential electric shock.
• Montimi: Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight (approximately 10.23 lbs).
• Temperatura e funksionimit: Do not operate the fixture outside its specified temperature range.
• LEDs: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye damage.

3. Instalimi

This floodlight is designed for wall mounting and requires hardwired installation. Professional installation is recommended.

Mjetet e nevojshme:

• Kaçavidë (Phillips dhe kokë e sheshtë)
• Strippers teli
• Pincë
• Drill (if mounting surface requires pilot holes)
• Pikëllim i rregullueshëm

Opsionet e montimit:

The FFLED39 supports various mounting options. The standard fixture comes with a wall mount. Optional accessories may include slipfitter mounts or other specialized brackets.

Figura 2: Shembample of a Slipfitter Mount (optional accessory)

Hapat e instalimit:

1. Shkëputni energjinë: Turn off power at the circuit breaker before beginning installation. Verify power is off using a voltage testues.
2. Përgatitni sipërfaqen e montimit: Securely attach the mounting bracket to the desired wall location. Ensure the bracket is level and firmly fastened.
3. Lidhjet me tela:
   • Connect the black wire from the fixture to the hot (L) wire from the power supply.
   • Connect the white wire from the fixture to the neutral (N) wire from the power supply.
   • Connect the green or bare copper wire from the fixture to the ground wire from the power supply.
   • Përdorni lidhëset e duhura të telave dhe sigurohuni që të gjitha lidhjet të jenë të sigurta.
4. Pajisjet e montimit: Attach the FFLED39 fixture to the mounting bracket. Secure it with the provided screws or bolts.
5. Rregulloni qëllimin: Loosen the adjustment screws on the fixture to aim the light as desired. Tighten the screws firmly once the desired angle is achieved.
6. Rivendosni energjinë: Turn on power at the circuit breaker. Test the fixture for proper operation.

4. Operacioni

The RAB Lighting FFLED39 is a hardwired floodlight. Its operation is typically controlled by an external switch or a photocell (if installed).

Operacioni standard:

• Once installed and wired, the fixture will illuminate when power is supplied via the connected wall switch or control system.
• Ensure the power source is within the specified 120-277V range.

Photocell Control (Optional):

If a photocell is integrated or installed with the fixture, the light will automatically turn on at dusk and off at dawn, based on ambient light levels.

Figura 3: Shembample of a Photocell (optional accessory)

5. Mirëmbajtja

The FFLED39 LED floodlight is designed for minimal maintenance due to its long-life LED components and durable construction.

Pastrimi:

• E jashtme: Pastroni periodikisht pjesën e jashtme të pajisjes me një leckë të butë.amp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents.
• Lente: Gently wipe the lens with a clean, soft cloth to ensure maximum light output.

Inspektimi:

• Periodically inspect the fixture for any signs of damage, loose connections, or wear.
• Ensure all mounting hardware remains tight and secure.
• If any damage is observed, disconnect power and contact a qualified electrician for repair or replacement.

6. Troubleshooting

If you experience issues with your FFLED39 floodlight, refer to the following troubleshooting guide:

If the problem persists after following these steps, contact RAB Lighting customer support or a qualified electrician.

7. Specifikimet

Detailed technical specifications for the RAB Lighting FFLED39 Future Flood LED Light:

Figure 4: Indication of 100,000-hour LED lifespan

8. Garancia dhe Mbështetja

Garancia e Prodhuesit:

The RAB Lighting FFLED39 Future Flood LED Light is covered by a Garanci 1-vjeçare e prodhuesit nga data e blerjes. Kjo garanci mbulon defektet në materiale dhe prodhim nën përdorim dhe shërbim normal.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, negligence, or unauthorized modification or repair.

Mbështetja e klientit:

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support. Refer to the official RAB Lighting webfaqe interneti për detajet aktuale të kontaktit.