GODOX Xpro-C
Godox Xpro-C & X1R-C Wireless Flash System User Manual
Model: Xpro-C, X1R-C | Brand: GODOX
1. Produkti i Mbaruarview
The Godox Xpro-C TTL Wireless Flash Trigger and X1R-C Receiver system is designed for seamless integration with Canon EOS cameras, offering comprehensive flash control. This system supports TTL autoflash, 1/8000s high-speed sync, multi-flash, manual flash, Flash Exposure Compensation (FEC), TCM Transform Function, Magnetic Function, One-Shoot & Multi-Shoot Setting, Group Modeling Lamp Control, Group Zooming, and simultaneous adjustment of all groups' output values.
It can function as a wireless Godox flash trigger for camera, outdoor, and studio flashes, a wireless Canon Speedlites trigger, or a wireless shutter release trigger. It also supports flash triggering via a 2.5mm sync cord jack for flashes without the Godox X system.
Figure 1.1: Godox Xpro-C Transmitter and two X1R-C Receivers.
2. Çfarë ka në kuti
Paketa juaj duhet të përmbajë artikujt e mëposhtëm:
- 1 x Godox Xpro-C TTL Wireless Flash Trigger Transmitter
- 2 x Godox X1R-C Controller Receiver
- 1 x Manuali i Përdoruesit
Figure 2.1: Versatile Usage Methods of the Godox 2.4G Wireless X System.
3. Konfigurimi
3.1 Instalimi i Baterive
The Xpro-C transmitter requires two AA batteries for operation. The X1R-C receivers also require batteries (typically AA, check receiver manual for specifics). Ensure batteries are inserted with correct polarity.
Video 3.1: Demonstrates battery installation and basic setup of the Godox Xpro Flash Trigger with X1R Receiver.
3.2 Mounting the Transmitter and Receiver
- Mount the Xpro-C transmitter onto your camera's hot shoe. Secure it by tightening the locking ring.
- Attach the X1R-C receiver to your compatible Canon flash unit's hot shoe.
- For studio flashes or other lighting equipment, connect the X1R-C receiver to the flash's 2.5mm sync cord jack if direct hot shoe mounting is not applicable.
Figure 3.2: Xpro-C Transmitter mounted on camera and X1R-C Receiver on a flash.
4. Udhëzimet e funksionimit
4.1 Powering On and Basic Interface
Turn on both the Xpro-C transmitter and the X1R-C receivers. The Xpro-C features an extra-large LCD panel for clear display of settings. Use the 5 group buttons and 4 function buttons for navigation and control.
Figure 4.1: Xpro-C Transmitter LCD and controls.
4.2 Wireless Control and Triggering
The Godox Xpro-C supports 16 groups and 32 channels for wireless control and triggering. This allows for precise management of multiple flash units. Adjust settings such as TTL autoflash, manual flash power, and high-speed sync directly from the Xpro-C transmitter.
- Blic automatik TTL: Rregullon automatikisht daljen e blicit për ekspozimin e saktë.
- Blic manual: Allows precise control over flash power output.
- Sinkronizim me Shpejtësi të Lartë (HSS): Enables flash synchronization at shutter speeds up to 1/8000s.
- Blic i shumëfishtë (stroboskopik): Shkakton një seri shkreptimesh të shpejta për efekte krijuese.
- Kompensimi i Ekspozimit të Blicit (FEC): Adjusts flash output relative to the metered exposure.
- TCM Function: Converts TTL flash values into manual output values for consistent results.
- Kontrolli i grupit: Independently control up to 5 groups (A, B, C, D, E) of flashes.
Video 4.2: Mbiview of Godox Xpro TTL Wireless Studio Flash Trigger features and controls.
4.3 Focus Assist Lamp
The Xpro-C transmitter includes a focus assist lamp to aid in achieving sharp focus in low-light conditions.
4.4 Azhurnimi i firmuerit
The Xpro-C supports firmware upgrades via its Type-C USB port. Visit the official Godox webfaqe interneti për firmware-in dhe udhëzimet më të fundit.
5. Mirëmbajtja
- Mbajini pajisjet të pastra duke i fshirë me një leckë të butë dhe të thatë.
- Shmangni ekspozimin e njësive ndaj temperaturave ekstreme, lagështirës ose rrezeve të diellit direkte.
- Remove batteries if the units will not be used for an extended period to prevent leakage and damage.
- Store in a cool, dry place, preferably in a protective case.
6. Troubleshooting
| Problem | Shkaku i mundshëm | Zgjidhje |
|---|---|---|
| Blici nuk po ndizet. | Incorrect channel/group settings; low batteries; loose connection. | Ensure transmitter and receiver are on the same channel and group. Check battery levels and replace if necessary. Verify secure connection to camera/flash hot shoe or sync port. |
| Dalje e paqëndrueshme e blicit. | Interference; incorrect mode setting; flash unit issues. | Change to a different channel. Confirm correct flash mode (TTL/Manual) is selected. Check the flash unit itself for proper function. |
| Test button on receiver fires all groups even if "off". | This is expected behavior for the test button. | This is a design feature. To meter individual groups, only power on the specific groups you intend to meter. |
7. Specifikimet
| Veçori | Detaj |
|---|---|
| Markë | GODOX |
| Numri i modelit | Xpro-C |
| Montime të pajtueshme | Canon E-TTL II |
| Shpejtësia e sinkronizimit të blicit | 1/8000 |
| Power Source (Xpro-C) | 2 x bateri AA |
| Sistemi pa tel | Sistemi pa tel Godox 2.4G X |
| Groups & Channels | 16 Groups, 32 Channels |
| Pesha e artikullit | 1.23 paund (paketa totale) |
| Dimensionet e paketës | 7.05 x 4.88 x 4.84 inç |
| Komponentët e përfshirë | Godox Xpro-C, 2 x Godox X1R-C, User Manual |
8. Garanci dhe Mbështetje
For detailed warranty information and technical support, please refer to the official Godox website or contact their customer service. This product includes a user manual for comprehensive guidance.
Ju gjithashtu mund të vizitoni Dyqani GODOX në Amazon për informacione shtesë mbi produktin dhe aksesorët.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.