FS-i6X 10CH 2.4GHz RC Transmitter Controller User Manual

1. Hyrje

This manual provides detailed instructions for the setup, operation, and maintenance of your FLYSKY FS-i6X 10CH 2.4GHz RC Transmitter Controller with FS-iA6B Receiver. The FS-i6X is designed for fixed-wing aircraft, gliders, and helicopters, offering reliable control through its AFHDS 2A/AFDHS system.

The system features bidirectional communication, allowing for data reception from various sensors, and utilizes multi-channel hopping frequency technology to minimize interference. It is built with low power consumption components for extended battery life.

2. Çfarë ka në kuti

• FS-i6X RC Transmitter (Mode 2)
• FS-iA6B Receiver
• Upgrade Cable (for PC connection)
• Udhëzues për fillimin e shpejtë

Figure 2.1: FS-i6X Transmitter and FS-iA6B Receiver included in the package.

Figure 2.2: The FS-i6X transmitter, FS-iA6B receiver, and USB upgrade cable.

3. Konfigurimi

3.1. Instalimi i baterisë

The FS-i6X transmitter requires 4 AA batteries (not included). Ensure correct polarity when inserting the batteries into the battery compartment located on the back of the transmitter.

Figura 3.1: E pasme view of the FS-i6X transmitter, highlighting the battery compartment.

3.2. Lidhja e marrësit

Connect the FS-iA6B receiver to your RC model according to your model's specific wiring diagram. The receiver features multiple channels for connecting servos and other components.

Figure 3.2: The FS-iA6B receiver, showing its connection ports and dual antennas.

3.3. Lidhja e Transmetuesit dhe Marrësit

To establish communication between the transmitter and receiver, a binding process is required. Refer to the Quick Start Guide for detailed binding instructions. Once bound, the system will maintain a strong, reliable connection.

3.4. Activating 10 Channels (if applicable)

The FS-i6X is default 6-channel. If you are using a 10-channel receiver like the FS-iA10B, you can activate the additional channels through the transmitter's menu. Navigate to the system settings to enable 10-channel operation.

Figure 3.3: The LCD screen of the FS-i6X, showing channel display and settings.

4. Udhëzimet e funksionimit

4.1. Kontrollet dhe Ekrani Bazë

The FS-i6X features a clear STN Transflective Display (LCD 128x64 Lattice, VA 73x39mm) with white backlight for easy readability. The main sticks control primary flight surfaces, while various switches and knobs provide additional control over auxiliary functions.

Figura 4.1: Përpara view of the FS-i6X transmitter, highlighting the control sticks and switches.

4.2. Navigimi i menysë

Use the navigation buttons and scroll wheel to access and adjust settings within the transmitter's menu. The menu allows for customization of various parameters including channel assignments, mixing, and dual rates.

Video 4.1: A demonstration of navigating the FS-i6X menu and adjusting settings.

4.3. Funksionet e avancuara

• Dual Rate/Exponential: Adjust the sensitivity of control inputs for different flight phases or pilot preferences.
• Auxiliary Channels: Assign switches or knobs to control additional functions on your model beyond the primary flight controls.
• Throttle Hold: A safety feature that disengages the throttle, useful for landing or emergencies.
• Elevon/V-Tail Mixing: Configure specific mixes for models with elevon or V-tail configurations.

Figura 4.2: Mbiview of the AFHDS2A system features, including 6/10 channels, SBUS/iBUS, Mix Control, and Real-time Telemetry.

4.4. Trainer Jack / Update Interface

The transmitter includes a PS/2 port for connecting to a PC via the provided upgrade cable. This allows for firmware updates and use with RC flight simulators (software purchased separately).

Figura 4.3: E pasme view of the FS-i6X, indicating the Trainer Jack/Update Interface and power input.

5. Mirëmbajtja

• Keep the transmitter clean and free from dust and moisture.
• Ruani në një vend të freskët dhe të thatë kur nuk përdoret.
• Hiqni bateritë nëse i ruani për periudha të gjata kohore për të parandaluar rrjedhjet.
• Regularly check all switches and sticks for smooth operation.

6. Troubleshooting

7. Specifikimet

• Kanalet: 6-10 (Default 6 Channels)
• Lloji i modelit: Fiks-Wing/Glider/Helikopter
• Diapazoni RF: 2.408-2.475 GHz
• Fuqia RF: <20 dBm
• Kanali RF: 135
• Gjerësia e brezit: 500 KHz
• 2.4GHz System: AFHDS 2A/AFDHS
• Lloji i modulimit: GFSK
• Volumi i ulëttage Paralajmërim: <4.2 V
• DSC port: PS/2 Port PPM
• Me pagesë: Nr
• Gjatësia e Antenës: 26mm (Dual Antenna)
• Pesha: 1.35 paund (392 g)
• Fuqia: 6V DC, 4*AA battery (not included)
• Shfaq: STN Transflective Display, LCD 128x64 Lattice, VA 73x39mm, LCD with white backlight
• Madhësia: 174x89x190mm (6.85x3.5x7.48 inches)
• On-line Update: po
• Ngjyra: Black (FSI6X+IA6B)
• Materiali: Plastike
• Certifikata: CE0678, FCC ID: N4ZFLYSKYI6X
• Modeli: Mode 2 (left hand throttle)

Figure 7.1: Dimensions of the FS-i6X transmitter.

8. Garancia dhe Mbështetja

Ky produkt vjen me një Garanci 90 ditore for manufacturer's product defects. For technical support or warranty claims, please contact FLYSKY customer service or the retailer from whom you purchased the product.