1. Hyrje
1.1 Produkti mbiview
The Bearware Digital Thermostat Plug is designed for temperature-controlled switching of heating and cooling appliances. It allows you to set a desired room temperature, and the device will automatically turn connected appliances on or off to maintain that temperature. This programmable thermostat is suitable for use with various electric heaters, air conditioners, and other temperature-sensitive devices.
1.2 Karakteristikat kryesore
- Kontrolli i temperaturës: Regulates temperature between 1°C and 45°C with an accuracy of ±0.5°C.
- Ekran i madh LCD: Features a clear 5 cm LCD for easy reading of time, temperature, and mode settings.
- I programueshëm: Offers flexible programming options for daily schedules and temperature settings.
- Anti-frost Function: Automatically activates heating if the room temperature drops below 2°C to prevent freezing.
- Modaliteti i dyfishtë: Supports both heating and cooling modes.
- Funksionim i lehtë: Simple button interface for setting time, temperature, and programs.
1.3 Përmbajtja e paketës
- Bearware Digital Thermostat Plug
- Manuali i Udhëzimeve
2. Udhëzimet e sigurisë
Please read these safety instructions carefully before using the device. Failure to follow these instructions may result in electric shock, fire, or injury.
- Kjo pajisje është vetëm për përdorim të brendshëm.
- Do not expose the device to moisture, direct sunlight, or extreme temperatures.
- Ensure the device is properly plugged into a grounded outlet.
- Mos e mbingarkoni prizën elektrike.
- Mos e çmontoni ose mos u përpiqni ta riparoni vetë pajisjen. Kontaktoni personel të kualifikuar për shërbim.
- Mbajeni jashtë mundësive të fëmijëve.
- Hiqeni pajisjen nga priza përpara se ta pastroni.
3. Përbërësit e produktit
Familiarize yourself with the components of your Bearware Digital Thermostat Plug:
Figura 1: Përpara view of the Bearware Digital Thermostat Plug, showing the display and control buttons. The display shows current time, day, room temperature, and set temperature. Buttons include Power, Set, OK, Up, and Down.
- Ekrani LCD: Shows current time, day, room temperature, set temperature, and operating mode icons.
- Butoni i Ndezjes (⏻): Ndez ose fiket pajisjen.
- Butoni SET: Enters programming mode and confirms selections.
- Butoni OK: Confirms settings during programming.
- Butoni i Shigjetës Lart (▲): Increases values or navigates menus.
- Butoni i Shigjetës Poshtë (▼): Decreases values or navigates menus.
- Integrated Socket: For connecting your heating or cooling appliance.
4. Konfigurimi dhe konfigurimi fillestar
4.1 Ndezja fillestare
- Plug the Bearware Digital Thermostat Plug into a standard wall outlet.
- The display will light up, and the device will be in standby mode or show default settings.
4.2 Përcaktimi i orës dhe ditës
To ensure accurate scheduling, set the current time and day:
Figura 2: Quick start guide diagram showing steps for time setting, heating/cooling mode selection, manual temperature setting, and timer programming.
- Shtypni dhe mbani shtypur SET button for approximately 3 seconds until the clock symbol on the display starts blinking.
- Përdorni Shigjeta lart (▲) or Shigjeta poshtë (▼) butonat për të rregulluar minutat. Shtypni OK për të konfirmuar.
- The hour display will start blinking. Use the Shigjeta lart (▲) or Shigjeta poshtë (▼) buttons to adjust the hours. Press OK për të konfirmuar.
- The day of the week will start blinking. Use the Shigjeta lart (▲) or Shigjeta poshtë (▼) buttons to select the current day. Press OK për të konfirmuar.
- The device will automatically exit the time setting menu after a few seconds, or you can briefly press the Fuqia (⏻) butonin për të dalë.
5. Modalitetet e operimit
5.1 Heating and Cooling Mode Selection
The thermostat can operate in either heating or cooling mode. By default, the device is set to heating mode.
- Shtypni dhe mbani shtypur Shigjeta lart (▲) button for approximately 3 seconds to enter the basic settings menu.
- Përdorni Shigjeta lart (▲) or Shigjeta poshtë (▼) buttons to toggle between the heating mode (indicated by a Nxehtësia icon, typically a flame) and cooling mode (indicated by a FTOHTË icon, typically a snowflake).
- After 5 seconds of inactivity, the setting will be saved, and the device will return to the main display.
- In Modaliteti i ngrohjes, the connected appliance will turn on if the room temperature is below the set target temperature.
- In Modaliteti i ftohjes, the connected appliance will turn on if the room temperature is above the set target temperature.
5.2 Manual Temperature Control
To set a specific target temperature manually:
- Shtypni shkurtimisht SET button until the manual mode icon (a hand with an index finger) appears on the display.
- Përdorni Shigjeta lart (▲) or Shigjeta poshtë (▼) buttons to adjust the desired target temperature.
- The connected heating or cooling appliance will switch on or off according to the selected mode and the newly set temperature.
- To exit manual mode, briefly press the SET butonin përsëri.
5.3 Programmable Timer Mode (ON/OFF Times)
You can program specific ON and OFF times for your connected appliance:
- Shtypni dhe mbani shtypur SET button for approximately 3 seconds to enter the time setting menu.
- Shtypni SET button once briefly to activate the ON time setting. The 'ON' symbol will blink.
- Përdorni Shigjeta lart (▲) or Shigjeta poshtë (▼) buttons to set the desired ON hour, then press OK.
- Përdorni Shigjeta lart (▲) or Shigjeta poshtë (▼) buttons to set the desired ON minute, then press OK.
- Shtypni SET button twice briefly to activate the OFF time setting. The 'OFF' symbol will blink.
- Përdorni Shigjeta lart (▲) or Shigjeta poshtë (▼) buttons to set the desired OFF hour, then press OK.
- Përdorni Shigjeta lart (▲) or Shigjeta poshtë (▼) buttons to set the desired OFF minute, then press OK.
- The device will automatically save the settings and exit the menu after a few seconds.
5.4 Anti-frost Function
The thermostat includes an anti-frost function to protect your space from freezing temperatures. If the room temperature drops below 2°C, the device will automatically activate the connected heating appliance to raise the temperature above the freezing point, preventing damage from cold.
6. Mirëmbajtja
6.1 Pastrimi
- Hiqeni gjithmonë pajisjen nga priza elektrike përpara se ta pastroni.
- Wipe the exterior of the thermostat with a soft, dry cloth.
- Mos përdorni pastrues gërryes, tretës ose kimikate të ashpra, pasi këto mund të dëmtojnë sipërfaqen.
- Ensure no liquid enters the device.
6.2 Ruajtja
If storing the device for an extended period, unplug it and store it in a cool, dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
If you encounter issues with your Bearware Digital Thermostat Plug, refer to the following common problems and solutions:
- Pa shfaqje:
- Ensure the thermostat is securely plugged into a working power outlet.
- Check if the power outlet itself is functional by plugging in another device.
- Lexim i pasaktë i temperaturës:
- Ensure the thermostat is not placed near heat sources (e.g., direct sunlight, appliances) or cold drafts, which can affect its sensor.
- Allow some time for the sensor to stabilize after initial plug-in or relocation.
- Appliance Not Switching On/Off:
- Verify that the thermostat is in the correct operating mode (heating or cooling) for your appliance.
- Check that the set target temperature is appropriate for the desired action (e.g., for heating, set temperature higher than room temperature).
- Ensure the connected appliance is switched on and functioning correctly.
- Review your programmed ON/OFF times if using timer mode.
- Butonat nuk përgjigjen:
- Try unplugging the device from the wall outlet for a few seconds and then plugging it back in to reset it.
Nëse problemi vazhdon pasi të provoni këto zgjidhje, ju lutemi kontaktoni mbështetjen e klientit.
8. Specifikimet teknike
Figura 3: Dimensions of the Bearware Digital Thermostat Plug, showing measurements in millimeters.
- Numri i modelit: B081HCF7WR
- Furnizimi me energji elektrike: 200-240 V ~ AC / 50 Hz
- Maks. Ngarko: 16 A
- Diapazoni i rregullueshëm i temperaturës: 1°C - 45°C
- Saktësia e kontrollit të temperaturës: ±1°C (as per specifications, A+ content states ±0.5°C)
- Sensori i temperaturës: NTC
- Self-Consumption Power: 1.3 W
- Hyrja: 1x Type E plug
- Prodhimi: 1x Type F female socket
- Lloji i prizës: EU (Euro)
- Shfaq: 5 cm (2 inch) LCD
- Dimensionet (J x P x H): Përafërsisht 14 x 3 x 8 cm
- Pesha: Përafërsisht 246 g
- Ngjyra: E bardha
9. Garancia dhe Mbështetja
Për informacion mbi garancinë ose mbështetje teknike, ju lutemi referojuni paketimit të produktit ose kontaktoni direkt prodhuesin. Ruajeni faturën e blerjes si provë blerjeje.