1. Hyrje
The SCUBAPRO Luna 2.0 AI is a wrist-mounted dive computer designed to provide essential dive data with clarity and ease of use. It features a large, high-contrast display and wireless air integration for monitoring tank pressure and calculating true remaining bottom time (RBT). This manual provides instructions for the proper setup, operation, and maintenance of your Luna 2.0 AI dive computer.
2. Informacion i rëndësishëm për sigurinë
Always prioritize safety during diving activities. This dive computer is a tool to assist in dive planning and execution, but it does not replace proper dive training, experience, or adherence to safe diving practices. Always follow the guidelines of your certifying agency. Regularly check your equipment before each dive. Consult a physician before diving if you have any health concerns.
3. Përmbajtja e paketës
Verifikoni që të gjitha artikujt janë të pranishëm në paketimin e produktit tuaj:
- SCUBAPRO Luna 2.0 AI Wrist Scuba Dive Computer
- Rasti mbrojtës
- Silicone Arm Strap
- Read First Manual (Quick Start Guide)
Image: The Luna 2.0 AI dive computer securely placed within its zippered protective case, alongside its accessories.
4. Produkti i Mbaruarview
The Luna 2.0 AI features a robust design with a clear, intuitive display and simple controls.
Imazhi: Përpara view of the SCUBAPRO Luna 2.0 AI dive computer, showcasing its large, high-contrast display with dive data visible.
Imazh: Profesionist anësorfile of the Luna 2.0 AI dive computer, highlighting its slim design and control buttons.
Imazh: Nga lart poshtë view of the Luna 2.0 AI dive computer, showing the full length of the silicone arm strap and buckle.
Karakteristikat kryesore:
- Ekran i lehtë për t'u lexuar: Wide, high-contrast black and white LCD display with large characters and a bright LED backlight.
- Thin, Low Profile: Slim thermoplastic housing with oil fill technology for reliable performance.
- Simple Two-Button Control: Intuitive menu and control for straightforward operation.
- Wireless Air Integration: Monitors tank pressure and provides true remaining bottom time (RBT) calculations based on breathing workload.
- Choice of 2 Algorithms: Predictive Multi-Gas Buhlmann ZH-L16 ADT MB PMG or ZH-L16+GF (Gradient Factor).
- Three Dive Modes & Nitrox Compatible: Scuba, Gauge, & Apnea modes. Nitrox compatible (100%) with 3 selectable gases.
- PDIS (Profile Dependent Intermediate Stops): Calculates an intermediate stop based on N2 loading, current and previous dives, and breathing mixes for safer diving.
- Personalization (MB Levels): Adjust the level of conservatism in the ADT algorithm to match experience, age, and physical conditioning.
- Human Factor Diving: Optional heart rate monitor (sold separately) records heartbeat and skin temperature for decompression calculation.
- Convenient Bluetooth LE Interface: Download dives to iOS or Android devices, or PC/Mac. Firmware is user-updatable.
Image: Close-up of the Luna 2.0 AI display, illustrating key features such as wireless air integration, easy-to-read screen, and multiple dive modes.
5. Konfigurimi
5.1 Ndezja Fillestare dhe Cilësimet Bazë
- Press and hold any button to power on the device.
- Follow the on-screen prompts to set basic parameters such as language, time, date, and measurement units (metric/imperial).
- Confirm settings to proceed.
5.2 Attaching the Silicone Arm Strap
The silicone arm strap is designed for comfortable and secure wear. Ensure it is properly attached to the dive computer and adjusted to fit snugly on your wrist or arm.
5.3 Wireless Air Integration Setup
The Luna 2.0 AI supports wireless air integration with a compatible SCUBAPRO transmitter (sold separately). To pair:
- Ensure your transmitter is active and within range of the dive computer.
- Navigate to the 'Air Integration' or 'Transmitter Pairing' menu on your Luna 2.0 AI.
- Follow the on-screen instructions to search for and pair with your transmitter.
- Verify that the tank pressure is displayed correctly on the computer.
6. Operating the Dive Computer
6.1 Dive Modes
The Luna 2.0 AI offers three primary operating modes:
- Scuba Mode: Standard dive mode for recreational and technical diving, providing full decompression calculations.
- Gauge Mode: Operates as a bottom timer, displaying depth, time, and temperature without decompression calculations.
- Apnea Mode: Optimized for freediving, tracking dive time, surface interval, and depth.
To switch between modes, access the main menu and select the desired mode.
6.2 Nitrox Settings
The computer is Nitrox compatible up to 100% oxygen. You can set up to three different gas mixes. To configure Nitrox settings:
- Enter the 'Gas Settings' menu.
- Select the gas number (G1, G2, G3).
- Adjust the oxygen percentage (O2%) and partial pressure of oxygen (PO2) limit for each gas.
6.3 Algorithm Selection and Personalization
The Luna 2.0 AI allows you to choose between two decompression algorithms and adjust conservatism:
- Predictive Multi-Gas Buhlmann ZH-L16 ADT MB PMG: A widely recognized algorithm.
- ZH-L16+GF (Gradient Factor): Offers additional control over decompression profiles.
MB (Microbubble) Levels: Adjusting MB levels allows you to increase or decrease the conservatism of the algorithm to suit your personal physiology, experience, and dive conditions. Refer to the detailed manual for specific guidance on MB level adjustments.
6.4 PDIS (Profile Dependent Intermediate Stops)
This feature calculates an intermediate stop based on nitrogen loading, current and previous dives, and breathing mixes, enhancing dive safety.
6.5 Bluetooth LE Interface
Use the integrated Bluetooth LE to connect your dive computer to a compatible iOS or Android device, or a PC/Mac. This allows for:
- Downloading dive logs for analysis and storage.
- Updating the device firmware.
Video: Një mbiview of the SCUBAPRO Luna 2.0 Wrist Dive Computer in use, demonstrating its features and readability during a dive. Duration: 0:15.
Image: A diver underwater, clearly wearing the Luna 2.0 AI dive computer on their wrist, demonstrating its practical application during a dive.
7. Mirëmbajtja
7.1 Pastrimi dhe Ruajtja
- After each dive, rinse the dive computer thoroughly with fresh water.
- Allow it to air dry completely before storage.
- Store the computer in its protective case in a cool, dry place away from direct sunlight.
7.2 Përditësimet e firmuerit
Periodically check for firmware updates via the Bluetooth LE interface. Updates can provide new features, performance enhancements, or bug fixes. Follow the instructions provided with the update software.
8. Troubleshooting
If you encounter issues with your Luna 2.0 AI, refer to the following common problems and solutions:
| Problem | Shkaku i mundshëm | Zgjidhje |
|---|---|---|
| Ekrani është i zbehtë ose i palexueshëm | Low battery, backlight setting, or environmental conditions | Check battery level. Adjust backlight intensity in settings. Ensure proper viewkënd ing. |
| No air integration data | Transmitter not paired, out of range, or low transmitter battery | Verify transmitter is on and paired. Ensure proximity. Check transmitter battery. |
| Computer does not power on | Bateria e varfëruar | Charge the battery or replace if necessary (refer to service center for battery replacement). |
| Probleme me lidhjen Bluetooth | Device not in pairing mode, interference, or software issue | Ensure Bluetooth is enabled on both devices. Restart both devices. Try pairing again. |
For issues not listed here, or if solutions do not resolve the problem, contact SCUBAPRO customer support.
9. Specifikimet
| Veçori | Detaj |
|---|---|
| Emri i modelit | Luna 2.0 Air Integrated (AI) Wrist Dive Computer |
| Numri i pjesës | 05.200.101 |
| Markë | Scubapro |
| Materiali | Plastike |
| Ngjyra | Blu |
| Dimensionet e artikullit (LxWxH) | 9 x 7 x 4 inç |
| Pesha e paketës | 0.46 kilogramë |
| Përdoruesit e sugjeruar | Unisex-i rritur |
| Komponentët e përfshirë | Computer, Case, Silicone Arm Strap, Read First Manual |
| Data e parë e disponueshme | 6 shtator 2023 |
10. Garancia dhe Mbështetja
10.1 Informacioni i garancisë
The SCUBAPRO Luna 2.0 AI Wrist Scuba Dive Computer comes with a 2 vit garanci. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.
10.2 Mbështetja e klientit
For technical assistance, warranty service, or further information, please contact SCUBAPRO customer support through their official website or authorized service centers. Do not attempt to open or repair the device yourself, as this may void the warranty.