Instruction Manual for Kenmore 110.79133413 Dryer Drum Belt Replacement

Hyrje

This manual provides detailed instructions for the installation and maintenance of the replacement dryer drum belt for Kenmore model 110.79133413 dryers. The drum belt is a critical component that allows the dryer drum to tumble, ensuring your clothes are dried efficiently. Proper installation is essential for the safe and effective operation of your appliance.

Informacioni i Sigurisë

Always prioritize safety when performing appliance repairs. Failure to follow these safety guidelines may result in personal injury or damage to the appliance.

• Shkëputni energjinë: Before beginning any repair, always unplug the dryer from the electrical outlet or turn off the circuit breaker to prevent electric shock.
• Vishni pajisje mbrojtëse: Wear work gloves to protect your hands from sharp edges and safety glasses to protect your eyes.
• Mjetet e duhura: Use the correct tools for the job to avoid stripping screws or damaging parts.
• Two-Person Job: Some steps may require lifting heavy components. Consider having assistance to prevent injury.
• Ndiqni udhëzimet e prodhuesit: Refer to your specific dryer's service manual for additional safety precautions and disassembly instructions.

Përputhshmëria

This replacement drum belt is designed for use with Kenmore dryer model 110.79133413. It is crucial to verify your dryer's model number before proceeding with the installation to ensure proper fit and function. The model number is typically located on a sticker inside the dryer door, on the back panel, or on the control panel.

Numri i pjesës së zëvendësimit: FRIC-PL-APP-TP-22052025-025707

Udhëzimet e instalimit

Follow these steps carefully to replace the dryer drum belt. The exact disassembly process may vary slightly depending on your specific dryer configuration, but the general principles remain the same.

Image 1: The replacement dryer drum belt. This black belt is designed to wrap around the dryer drum and connect to the motor, enabling the drum to rotate.

1. Përgatitni tharësen:
   • Shkëputeni tharësen nga priza e murit.
   • Move the dryer away from the wall to allow access to the rear and sides.
2. Hyrja në pjesën e brendshme të tharëses:
   • Depending on your dryer model, you may need to remove the top panel, front panel, or both. Typically, screws are located at the back or inside the door frame.
   • Carefully disconnect any wire harnesses or components that prevent panel removal.
3. Hiqni rripin e vjetër:
   • Locate the dryer drum and the motor assembly. The old belt will likely be broken or loose around the drum.
   • If the old belt is still partially intact, note its routing around the motor pulley and idler pulley for reference.
   • Remove any remaining pieces of the old belt.
4. Instaloni rripin e ri:
   • Position the new belt around the dryer drum. Ensure it is centered on the drum.
   • Reach underneath the drum to route the belt around the motor pulley and the idler pulley. The idler pulley provides tension to the belt.
   • The belt should form a "W" shape around the motor pulley and idler pulley, with the ribbed side of the belt facing the pulleys.
   • Rotate the drum manually a few times to ensure the belt is properly seated and moves smoothly without slipping.
5. Montoni përsëri tharësen:
   • Carefully reattach any wire harnesses and components that were disconnected.
   • Reinstall the front and/or top panels, securing them with their original screws.
   • Push the dryer back into its original position.
6. Test the Dryer:
   • Lidheni tharësen përsëri në prizë elektrike.
   • Run a short cycle to ensure the drum tumbles correctly and there are no unusual noises.

Mirëmbajtja

To maximize the lifespan of your dryer drum belt and ensure optimal dryer performance:

• Inspektimi i rregullt: Periodically inspect the belt for signs of wear, fraying, or cracking. Replace it if any damage is observed.
• Shmangni mbingarkimin: Overloading the dryer can put excessive strain on the drum belt, leading to premature wear.
• Pastroni filtrin e fijeve: A clogged lint filter can restrict airflow, causing the dryer to overheat and potentially damage internal components, including the belt.

Zgjidhja e problemeve

If your dryer is not functioning correctly after belt replacement, consider these common issues:

• Dryer Not Tumbling:
  • Ensure the belt is correctly routed around the motor and idler pulleys.
  • Check if the idler pulley is providing adequate tension.
  • Verify that the motor is receiving power and operating.
• Zhurma klithjeje ose kërcitjeje:
  • The belt might be misaligned or rubbing against another component.
  • Check the idler pulley and drum rollers for wear or damage.
• Tharësja ndalet në mes të ciklit:
  • This could indicate overheating due to restricted airflow or a faulty thermal fuse, not directly related to the belt but often associated with dryer issues.

Nëse hapat e zgjidhjes së problemeve nuk e zgjidhin problemin, rekomandohet të konsultoheni me një teknik të kualifikuar të pajisjeve.

Specifikimet

• Prodhuesi: Fricparts
• Numri i pjesës: FRIC-PL-APP-TP-22052025-025707
• Compatible Dryer Model: Kenmore 110.79133413
• Ngjyra: E zezë
• Sasia e paketës së artikullit: 1

Garancia dhe Mbështetja

For information regarding warranty coverage or technical support for this replacement part, please refer to the product packaging or contact the seller directly. Keep your purchase receipt as proof of purchase.

For general Kenmore dryer support, please consult the official Kenmore website or your dryer's original user manual.