X10 MC10A Plug-in Mini Controller User Manual

Hyrje

The X10 MC10A Plug-in Mini Controller is designed to provide convenient control over your X10 compatible home automation devices. This compact unit allows you to manage up to 8 different groups of X10 receivers, including lamp modules, appliance modules, wall switches, and universal modules. It features dedicated buttons for dimming and brightening lights, as well as an "All Lights On" and "All Units Off" function for quick control of your entire X10 system.

Konfigurimi

Setting up your MC10A Mini Controller is a straightforward process:

1. Shpaketoj: Carefully remove the MC10A Mini Controller from its packaging.
2. Lidhja e energjisë: Plug the MC10A Mini Controller into any standard 120V AC wall outlet. Ensure the outlet is easily accessible.
3. House Code Selection: On the right side of the controller, locate the rotary switch labeled 'A' through 'P'. This is your House Code selector. Set this switch to the same House Code as your X10 compatible receivers (e.g., 'A', 'B', 'C', etc.). All devices you wish to control with this unit must be set to the same House Code.
4. Unit Code Assignment: The MC10A controls units 1-8. Ensure your X10 receivers are assigned Unit Codes within this range (1-8) and match the desired control buttons on the MC10A.

Figura 1: Përpara view of the X10 MC10A Plug-in Mini Controller, showing the array of control buttons and the power plug. The buttons are clearly labeled for ON/OFF functions for units 1-8, Bright/Dim controls, and All Lights ON/All Units OFF. A red LED indicator is visible at the top center.

Udhëzimet e funksionimit

Once set up, operating the MC10A is intuitive:

• Individual Unit Control (1-8):
  • Locate the pairs of ON/OFF buttons labeled 1/5, 2/6, 3/7, and 4/8.
  • To control units 1-4, ensure the "1-4 / 5-8" selector button (located between the unit control buttons and the BRT/DIM buttons) is pressed in for "1-4".
  • To control units 5-8, ensure the "1-4 / 5-8" selector button is pressed in for "5-8".
  • Shtypni ON button above the corresponding unit number to turn on the connected device.
  • Shtypni FAKT button below the corresponding unit number to turn off the connected device.
• Dim/Bright Control:
  • These buttons are used with X10 lamp modules or dimmer-compatible wall switches.
  • Shtypni BRT (Bright) button to increase the brightness of the selected lamp modul.
  • Shtypni DIM button to decrease the brightness of the selected lamp modul.
  • Shënim: Not all X10 modules or bulbs support dimming. CFL and LED bulbs may not dim properly or at all.
• All Lights On:
  • Shtypni All Lights ON button (top right) to turn on all X10 lamp modules set to the same House Code as the controller.
• All Units Off:
  • Shtypni All Units OFF button (bottom right) to turn off all X10 modules (both lamp and appliance) set to the same House Code as the controller.

Mirëmbajtja

The X10 MC10A Mini Controller requires minimal maintenance:

• Pastrimi: Disconnect the controller from the power outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
• Magazinimi: If storing the device for an extended period, keep it in a cool, dry place away from direct sunlight and extreme temperatures.
• Shmangni lagështinë: Do not expose the controller to water or excessive humidity. This device is for indoor use only.

Zgjidhja e problemeve

If you encounter issues with your MC10A Mini Controller, refer to the following common problems and solutions:

Specifikimet

Informacioni i Garancisë

X10 products typically come with a limited manufacturer's warranty. For specific details regarding the warranty period and terms for your MC10A Plug-in Mini Controller, please refer to the warranty card included with your product packaging or visit the official X10 webvend. Ruajeni faturën e blerjes si provë blerjeje për çdo kërkesë garancie.

Mbështetja e klientit

For further assistance, technical support, or inquiries regarding your X10 MC10A Plug-in Mini Controller, please contact X10 customer support. Contact information can usually be found on the official X10 website or within your product documentation. When contacting support, please have your product model number (MC10A) and a description of your issue ready.

Burimet në internet: You may also find helpful resources, FAQs, and community forums on the X10 official webfaqe.