Perel E305DIN1 DIN Rail Week Timer Instruction Manual

1. Hyrje

This manual provides detailed instructions for the installation, operation, and maintenance of your Perel E305DIN1 DIN Rail Week Timer. Please read this manual thoroughly before using the device to ensure proper function and safety. The Perel E305DIN1 is designed for precise daily and weekly control of electrical circuits.

2. Veçoritë

The Perel E305DIN1 DIN Rail Week Timer offers a range of functionalities for efficient time management of electrical devices:

• Daily and Weekly Programming: Allows for flexible scheduling across days and weeks.
• 8 ON/OFF Program Locations: Configure up to 8 distinct ON and OFF switching times.
• Ekrani LCD: Clear display of time, day of the week, and current operating status.
• NiMH Backup Battery: Integrated battery provides up to 200 hours of autonomy after a full charge, preserving settings during power outages.
• 3-Way Manual Override: Easily switch between ON, OFF, and AUTO modes manually.
• Opsionet e montimit: Designed for DIN rail mounting or wall mounting using the included bracket.
• Mbulesa mbrojtëse transparente: Provides protection for the display and controls.

3. Konfigurimi dhe instalimi

Paralajmërim: Installation should only be performed by a qualified electrician. Ensure the main power supply is disconnected before commencing installation.

3.1 Montimi

The E305DIN1 timer can be mounted in two ways:

• Montimi i hekurudhës DIN: Snap the timer onto a standard 35mm DIN rail within an electrical enclosure.
• Montimi në mur: Use the provided bracket to secure the timer to a wall. Ensure the mounting surface is stable and capable of supporting the device.

3.2 Lidhja elektrike

Refer to the wiring diagram provided with the device for specific connection points. General steps include:

1. Connect the main power supply (220-250VAC, 50Hz) to the designated input terminals.
2. Connect the load (device to be controlled) to the output terminals. Ensure the load's specifications do not exceed the timer's maximum output capacity (16A resistive, 8A inductive).
3. Kontrolloni dy herë të gjitha lidhjet për ngushtësi dhe saktësi përpara se të rivendosni energjinë elektrike.

Image: Perel E305DIN1 DIN Rail Week Timer. This image shows the front view of the timer, highlighting its LCD display, control buttons, and transparent protective cover.

4. Udhëzimet e funksionimit

After installation and power-up, the timer's internal battery will charge. Allow sufficient time for the battery to charge for optimal backup functionality.

4.1 Vendosja e Orës dhe Ditës Aktuale

1. Shtypni ORË butonin.
2. Gjatë mbajtjes ORË, shtypni DITA butonin për të vendosur ditën aktuale të javës.
3. Gjatë mbajtjes ORË, shtypni ORË butonin për të vendosur orën aktuale.
4. Gjatë mbajtjes ORË, shtypni MIN butonin për të vendosur minutën aktuale.

4.2 Programimi i Kohëve të Ndezjes/Fikjes

The timer allows for up to 8 ON/OFF program pairs.

1. Shtypni PROG button once to enter program mode. The display will show '1 ON'.
2. Përdorni DITA, ORË, dhe MIN buttons to set the desired ON time for program 1.
3. Shtypni PROG përsëri. Ekrani do të shfaqë '1 OFF'.
4. Përdorni DITA, ORË, dhe MIN buttons to set the desired OFF time for program 1.
5. Repeat steps 1-4 for programs 2 through 8.
6. Shtypni ORË button to exit program mode and return to normal operation.

4.3 Manual Override Function

The manual override function allows you to temporarily change the timer's output state without affecting programmed settings.

• Shtypni MANUAL butoni për të kaluar nëpër modalitetet:
• ON: The output is continuously ON, overriding any programmed OFF times.
• FIKUR: The output is continuously OFF, overriding any programmed ON times.
• MAKINA: The timer operates according to the programmed ON/OFF schedules.

5. Mirëmbajtja

The Perel E305DIN1 timer requires minimal maintenance.

• Pastrimi: Fshijeni pjesën e jashtme me një leckë të butë dhe të thatë. Mos përdorni pastrues ose tretës gërryes.
• Rikthimi i baterisë: The internal NiMH battery is designed for long life. If the timer frequently loses its settings during power outages, the battery may need replacement by a qualified technician.
• Kushtet e mjedisit: Ensure the timer operates within its specified temperature range (-10°C to 40°C) and avoid excessive humidity or direct sunlight.

6. Troubleshooting

If you encounter issues with your Perel E305DIN1 timer, refer to the following common problems and solutions:

• Kohëmatësi nuk ndizet/fiket sipas programit:
  • Check if the timer is in AUTO mode. If it's in ON or OFF manual override, it will ignore programs.
  • Verify that the programmed ON/OFF times are correctly set and correspond to the current day.
  • Ensure the current time and day are accurately set on the timer.
• Ekrani është bosh ose dridhet:
  • Check the main power supply to the timer.
  • If power is present, the internal backup battery might be completely discharged. Allow the timer to be powered for several hours to recharge the battery.
• Kohëmatësi humbet cilësimet pas ndërprerjes së energjisëtage:
  • The internal NiMH backup battery may not be fully charged or may be at the end of its lifespan. Ensure the timer is continuously powered for at least 24 hours to fully charge the battery. If the issue persists, the battery may need replacement.
• Time drift (timer becomes inaccurate over time):
  • The timer has a specified accuracy of ±1 minute per month. Minor adjustments may be necessary periodically. If the drift is significantly higher, contact support.

Nëse këto hapa nuk e zgjidhin problemin, ju lutemi kontaktoni mbështetjen e klientit.

7. Specifikimet

Below are the technical specifications for the Perel E305DIN1 DIN Rail Week Timer:

8. Garancia dhe Mbështetja

This Perel product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the Perel customer service department.

Ruajeni faturën e blerjes si provë blerjeje për qëllime garancie.