The GREISINGER logo, representing the manufacturer of this oxygen tester.
GREISINGER GOX 100 Tester for the Air User Manual
Model: GOX 100 (Part Number: 600437)
1. Hyrje
The GREISINGER GOX 100 is a compact and precise measuring instrument designed for atmospheric oxygen measurements. It is suitable for a wide range of applications, including scuba diving, workplace safety, and air conditioning and ventilation technology. This manual provides essential information for the proper setup, operation, and maintenance of your GOX 100 device.
2. Informacion mbi sigurinë
- Read this manual thoroughly before operating the device.
- Mos e ekspozoni pajisjen ndaj temperaturave ekstreme, rrezeve të diellit direkte ose lagështirës së tepërt.
- Ensure the sensor is properly connected before taking measurements.
- Only use the device for its intended purpose of measuring atmospheric oxygen.
- Mbajeni pajisjen dhe përbërësit e saj larg fëmijëve.
- Hidhni bateritë dhe pajisjen sipas rregulloreve lokale.
3. Përmbajtja e paketës
Verifikoni që të gjitha sendet janë të pranishme në paketim:
- GREISINGER GOX 100 Oxygen Meter
- Oxygen Sensor (connected via cable)
- Manuali i Përdoruesit
- 9V Block Battery (may not be included, check packaging)
4. Konfigurimi
4.1 Instalimi i baterisë
- Gjeni ndarjen e baterisë në pjesën e pasme të pajisjes.
- Hapni kapakun e ndarjes së baterisë.
- Insert a 9V block battery, ensuring correct polarity.
- Mbyllni mirë kapakun e ndarjes së baterisë.
4.2 Lidhja e sensorit
The oxygen sensor is typically pre-connected to the GOX 100 via a cable. Ensure the connection is firm and secure.
The GREISINGER GOX 100 device with its attached oxygen sensor, displaying an oxygen reading of 20.9%.
5. Udhëzimet e funksionimit
5.1 Ndezja/Fikja
- Për të ndezur pajisjen, shtypni ndezur/fikur butonin. Ekrani do të ndriçohet.
- Për të fikur pajisjen, shtypni dhe mbani shtypur ndezur/fikur butonin derisa ekrani të fiket.
5.2 Marrja e një Matjeje
- Once powered on, the device will automatically begin displaying the current oxygen concentration in percentage (%).
- Position the sensor in the environment where you wish to measure oxygen. Allow a few moments for the reading to stabilize.
5.3 MIN/MAX Value Recall
- Shtypni modaliteti button to cycle through different display modes, including minimum (MIN) and maximum (MAX) oxygen values recorded since the device was last powered on or reset.
- To reset MIN/MAX values, refer to the specific instructions in the full manual (if applicable).
5.4 Automatic Off Function
The GOX 100 features an adjustable automatic off function to conserve battery life. If enabled, the device will power off after a period of inactivity. Refer to the full manual for instructions on how to adjust or disable this feature.
6. Kalibrimi
Regular calibration ensures the accuracy of your GOX 100. The device supports easy calibration in ambient air.
- Ensure the device and sensor are at a stable temperature.
- Place the sensor in fresh ambient air, away from any sources of gas or fumes.
- Shtypni dhe mbani shtypur kal button until the display indicates calibration mode.
- The device will automatically adjust its reading to 20.9% or 21.0% oxygen, which is the approximate concentration of oxygen in normal ambient air.
- Once calibration is complete, the device will return to normal measurement mode.
The GREISINGER GOX 100 displaying 21.0% O2, indicating a successful calibration in ambient air.
7. Mirëmbajtja
7.1 Zëvendësimi i sensorit
The GOX 100 features a convenient, easily replaceable sensor element. Over time, the sensor's performance may degrade. When replacement is necessary:
- Fikni pajisjen.
- Carefully disconnect the old sensor from the cable.
- Connect the new, compatible GREISINGER oxygen sensor.
- Perform a calibration as described in Section 6.
7.2 Pastrimi
- Pastroni pajisjen casing me një të butë, damp pëlhurë. Mos përdorni pastrues gërryes ose tretës.
- Ensure no liquid enters the device or sensor connections.
- Keep the sensor clean and free from dust or debris.
8. Troubleshooting
| Problem | Shkaku/zgjidhja e mundshme |
|---|---|
| Pajisja nuk ndizet | Kontrolloni instalimin dhe ngarkimin e baterisë. Zëvendësoni baterinë nëse është e nevojshme. |
| Lexime të pasakta | Perform calibration (Section 6). Check sensor for damage or contamination. Sensor may need replacement. |
| Ekrani shfaq 'Err' ose të ngjashme | Indicates a sensor error or malfunction. Try recalibrating. If issue persists, sensor may need replacement or contact support. |
| Automatic off too soon/not at all | Adjust the automatic off settings (refer to full manual). |
9. Specifikimet teknike
| Parametri | Vlera |
|---|---|
| Gama e matjes | 0 - 100 % Oxygen |
| Rezolucioni | 0.1 % |
| Saktësia e matjes | 0 % (Note: This likely refers to a specific condition or a typo in source data, typical accuracy is usually +/- a percentage point) |
| Furnizimi me energji elektrike | Bateri bllok 9V |
| Lloji i mbrojtjes | IP65 |
| Përmasat (H x W) | 106 mm x 67 mm |
| Pesha | 150 g (device only, approx.) |
| Cable Length (sensor) | 0.7 m |
| Kompensimi termik | Automatik |
10. Garancia dhe Mbështetja
GREISINGER products are manufactured to high quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official GREISINGER webfaqe.
For technical support, troubleshooting assistance, or to inquire about replacement parts and sensors, please contact GREISINGER customer service through their official webfaqja e internetit ose informacioni i kontaktit i dhënë në dokumentacionin e produktit tuaj.
