1. Hyrje
The Testo 205 is a robust handheld pH and temperature measuring instrument designed for use in semi-solid media. It is particularly suitable for applications in food production, such as monitoring the quality and maturation of meat in butcher shops, slaughterhouses, and the meat-processing industry. This manual provides essential information for the proper setup, operation, and maintenance of your Testo 205 device.
Figure 1: The Testo 205 Handheld T-bar pH Meter, showing its display and controls.
2. Karakteristikat kryesore
- Simultaneous measurement of pH value and temperature in semi-solid media.
- Integrated temperature sensor for automatic temperature compensation, ensuring accurate pH readings.
- Maintenance-free pH probe with gel electrolyte, designed to be leak-proof and resistant to dirt.
- Hole diaphragm on the pH probe for quick and reliable measurements.
- User-replaceable combined pH measuring tip and temperature probe.
- Two-line, illuminated LCD display showing both pH and temperature readings.
- Automatic final value recognition (auto-hold function) with an audible advisory tone when readings stabilize.
- Storage cap filled with gel electrolyte to maintain probe hydration and extend its lifespan.
- Includes a belt/wall bracket for secure storage.
- Supports one, two, or three-point calibration.
3. Konfigurimi dhe Përdorimi Fillestar
3.1. Instalimi i baterisë
The Testo 205 uses 4 x LR44 button cell batteries. To install or replace batteries:
- Gjeni kapakun e ndarjes së baterisë në pjesën e pasme të pajisjes.
- Open the cover using a suitable tool (e.g., a small screwdriver or coin).
- Insert the 4 LR44 button cell batteries, ensuring correct polarity.
- Mbyllni mirë kapakun e ndarjes së baterisë.
3.2. Preparing the pH Probe
Before first use, or after prolonged storage, ensure the pH probe is properly conditioned.
- Remove the storage cap from the pH probe. The cap contains gel electrolyte to keep the probe hydrated.
- Rinse the probe tip with distilled water.
- Proceed with calibration as described in Section 4.1.
4. Udhëzimet e funksionimit
4.1. Kalibrimi
Regular calibration is crucial for accurate pH measurements. The Testo 205 supports one, two, or three-point calibration using buffer solutions.
- Shtypni NE PRITJE butonin për të ndezur pajisjen.
- Shtypni CAL butonin për të hyrë në modalitetin e kalibrimit.
- Immerse the pH probe into the first calibration buffer solution (e.g., pH 7.00). Ensure the probe tip is fully submerged.
- The device will automatically detect the buffer and begin calibration. Wait for the reading to stabilize and the device to confirm calibration (e.g., by displaying "CAL OK" or a stable value).
- Shpëlajeni sondën me ujë të distiluar.
- For two or three-point calibration, repeat steps 3-5 with additional buffer solutions (e.g., pH 4.01 and pH 10.01).
- Exit calibration mode by pressing the CAL button again or waiting for automatic exit.
Shënim: For economical use of calibration solution, Testo offers calibration dosing bottles with integrated dosing apertures.
4.2. Marrja e një Matje
To measure pH and temperature in semi-solid media:
- Ensure the device is calibrated and the probe is clean.
- Shtypni NE PRITJE butonin për të ndezur pajisjen.
- Carefully insert the pH probe into the semi-solid medium (e.g., meat). Ensure good contact and sufficient depth for accurate readings.
- The illuminated display will show both the pH value and temperature simultaneously.
- The automatic final value recognition (auto-hold) will capture the reading once it stabilizes. An advisory tone will sound to indicate stability.
- To manually hold a reading, press the NE PRITJE button during measurement. Press again to release.
- Pas matjes, shpëlajeni sondën plotësisht me ujë të distiluar.
Figure 2: The Testo 205 being used to measure the pH of a semi-solid food product, demonstrating its application.
4.3. Butoni i modalitetit
Të MODE button allows you to switch between different display modes or access additional functions, if available. Refer to the on-screen prompts for specific options.
5. Mirëmbajtja
5.1. Probe Cleaning and Storage
Proper cleaning and storage are essential for maintaining the accuracy and lifespan of the pH probe.
- Pas çdo përdorimi: Rinse the pH probe thoroughly with distilled water to remove any residue from the measured medium.
- Për ruajtje: Always place the storage cap, filled with gel electrolyte, back onto the pH probe. This prevents the probe from drying out and ensures its readiness for future measurements.
- Pastrim i thellë: If the probe becomes heavily soiled, consult specialized cleaning solutions for pH electrodes. Avoid abrasive materials.
5.2. Replacing the pH Probe
The combined pH measuring tip with temperature probe is user-replaceable. If the probe's performance degrades significantly despite proper cleaning and calibration, it may need replacement.
- Gently twist and pull the old probe assembly from the main unit.
- Align the new probe assembly with the connector on the main unit.
- Push and twist gently until the new probe is securely attached.
- After replacing the probe, perform a full calibration as described in Section 4.1.
5.3. Ndërrimi i baterisë
When the battery indicator appears on the display, replace the batteries as described in Section 3.1.
6. Troubleshooting
| Problem | Shkaku i mundshëm | Zgjidhje |
|---|---|---|
| Lexime të pasakta të pH-it | Probe not calibrated; dirty probe; dried-out probe; expired buffer solutions; damaged probe. | Perform calibration (Section 4.1); clean probe (Section 5.1); rehydrate probe in storage solution; use fresh buffer solutions; replace probe (Section 5.2). |
| Koha e ngadaltë e përgjigjes | Dirty probe; dried-out probe; low battery. | Clean probe (Section 5.1); rehydrate probe; replace batteries (Section 3.1). |
| Pajisja nuk ndizet | Bateri të ngordhura; instalim i gabuar i baterisë. | Replace batteries (Section 3.1); check battery polarity. |
| Display shows "Err" or similar error message | Probe issue; internal fault. | Check probe connection; try cleaning/recalibrating; if problem persists, contact Testo support. |
7. Specifikimet teknike
| Parametri | Vlera |
|---|---|
| pH - Electrode | |
| Gama e matjes | 0 deri në 14 pH |
| Saktësia | ±0.02 pH |
| Rezolucioni | PH 0.01 |
| Temperature - NTC | |
| Gama e matjes | 0 to +60 °C (Short-term to +80 °C max. 5 min) |
| Saktësia | ±0.4 °C |
| Rezolucioni | 0.1 °C |
| Të dhëna teknike të përgjithshme | |
| Temperatura e ruajtjes | -20 deri +70 °C |
| Temperatura e funksionimit | 0 deri +50 °C |
| Pesha | 135 g |
| Dimensionet (J x P x H) | 145 x 38 x 167 mm |
| Lloji i baterisë | 4 x Button cell LR44 |
| Jetëgjatësia e baterisë | 80 h (Auto Off 10 Min) |
| Lloji i ekranit | LCD, 2 lines |
8. Garancia dhe Mbështetja
8.1. Informacioni i garancisë
Testo products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Testo webvend. Ruajeni provën e blerjes për kërkesat e garancisë.
8.2. Mbështetja e klientit
If you encounter any issues not covered in this manual or require further assistance, please contact Testo customer support. Contact details can typically be found on the Testo webvend ose në paketimin e produktit.
Për më shumë informacion, vizitoni Testo Store on Amazon.
