1. Hyrje
This manual provides instructions for the safe installation, operation, and maintenance of the Leviton 8200-LW 15-Amp, 125-Volt, Hospital Grade Duplex Receptacle. Please read these instructions thoroughly before beginning installation and retain them for future reference.
Imazhi 1: Përpara view of the Leviton 8200-LW Hospital Grade Duplex Receptacle in White.
2. Informacion i rëndësishëm për sigurinë
PARALAJMËRIM: PËR TË SHMANGUAR ZJARRI, GRONDJA APO VDEKJA; FIKONI FREZIKEN NË NDËRPRESËSIN APO SIGURALËT DHE PROVO SE FYKËSIA ËSHTË FIKË PARA LINDJES!
- Installation must be performed by a qualified electrician in accordance with all national and local electrical codes and regulations.
- Gjithmonë shkëputni energjinë elektrike në panelin kryesor të shërbimit përpara se të punoni me instalimet elektrike.
- Use only copper or copper-clad wire. Do not use aluminum wire with this device.
- Sigurohuni që të gjitha lidhjet e telave janë të sigurta dhe të izoluara siç duhet.
- Kjo pajisje është projektuar vetëm për përdorim të brendshëm.
- Mos i tejkaloni vlerësimet elektrike të specifikuara të pajisjes.
3. Përmbajtja e paketës
The package for the Leviton 8200-LW Duplex Receptacle typically includes:
- One (1) Leviton 8200-LW 15-Amp, 125-Volt, Hospital Grade Duplex Receptacle (White)
4. Specifikimet e produktit
| Numri i modelit: | 8200-LW |
| Ampegërsi: | 15 Amps |
| Vëlltage: | 125 volt |
| Konfigurimi: | 5-15R |
| Lidhja elektrike: | 3-Wire, Self-Grounding (Back and Side Wiring) |
| Polakët: | 2-Pole |
| Materiali: | Nylon (Body/Face) |
| Ngjyra: | E bardha |
| Miratime: | UL, CSA C22.2, NOM 057 |
| Lloji: | Heavy Duty, Hospital Grade |
5. Konfigurimi dhe instalimi
Mjetet e nevojshme: Screwdriver (Phillips and/or Flathead), Wire Strippers, Electrical Tape, Voltage Tester.
- Fikni energjinë: Locate the circuit breaker or fuse that controls the outlet you are replacing or installing. Turn off the power and verify it is off using a voltage testues.
- Remove Old Receptacle (if applicable): Unscrew the wall plate and then the mounting screws holding the old receptacle in the electrical box. Carefully pull the old receptacle out of the box.
- Shkëputni telat: Note the position of each wire before disconnecting. Typically:
- Green or Bare Copper Wire: Teli i tokëzimit.
- Teli i bardhë: Teli neutral.
- Black or Red Wire: Hot (live) wire.
- Përgatitni telat: If necessary, strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the wires. Ensure the wire ends are clean and straight.
- Connect Wires to New Receptacle: The Leviton 8200-LW supports both back and side wiring.
- Tel Tokëzimi (Bakri i Gjelbër ose i Zhveshur): Connect to the green hexagonal ground screw.
- Tel Neutral (i Bardhë): Connect to the silver terminal screws.
- Tel i nxehtë (i zi ose i kuq): Connect to the brass terminal screws.
For Side Wiring: Loop the wire clockwise around the screw terminal and tighten securely. Ensure no bare wire is exposed outside the terminal.
For Back Wiring: Insert the stripped wire end into the appropriate hole on the back of the receptacle and tighten the corresponding screw on the side. The V-shaped, serrated back-wiring clamps ensure superior contact.
- Enë e sigurt: Carefully fold the wires into the electrical box. Insert the new receptacle into the box and secure it with the mounting screws.
- Instaloni pllakën e murit: Attach the wall plate over the receptacle.
- Rivendosni energjinë: Turn the power back on at the circuit breaker or fuse.
- Test: Test the receptacle with a known working device.
6. Udhëzimet e funksionimit
The Leviton 8200-LW Duplex Receptacle functions as a standard electrical outlet. Once properly installed and powered, simply insert the plug of your electrical device into one of the two available outlets. Ensure the plug is fully inserted for a secure connection.
7. Mirëmbajtja
- Pastrimi: To clean the receptacle, ensure power is off at the circuit breaker. Wipe the surface with a soft, damp pëlhurë. Mos përdorni pastrues gërryes ose tretës.
- Inspektimi: Periodically inspect the receptacle for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, disconnect power and have the device inspected or replaced by a qualified electrician.
- "Green Dot" Marking: This hospital-grade receptacle features a permanent "Green Dot" marking on its face, indicating its compliance with hospital-grade standards for enhanced durability and reliability.
8. Troubleshooting
| Problem | Shkaku i mundshëm | Zgjidhje |
|---|---|---|
| Nuk ka energji në enë. | Ndërprerësi i qarkut është shkëputur ose siguresa është djegur. Lidhje e lirshme e instalimeve elektrike. | Check and reset the circuit breaker or replace the fuse. Turn off power and check all wire connections for tightness. |
| Plug feels loose in the receptacle. | Worn receptacle contacts (unlikely for new hospital-grade). Incorrect plug type. | Ensure the plug is fully inserted. If the issue persists with multiple devices, consult a qualified electrician for inspection. |
| Receptacle is hot to the touch. | Overload on the circuit. Loose connection. Faulty device. | Immediately disconnect power. Reduce the load on the circuit. Have a qualified electrician inspect the wiring and device. |
9. Garancia dhe Mbështetja
Leviton products are manufactured to the highest quality standards. For specific warranty information and customer support, please refer to the documentation included with your purchase or visit the official Leviton webfaqe interneti. Ruajeni faturën e blerjes si provë të blerjes.
Leviton Customer Support:
- Visit Leviton Support Webfaqe
- Refer to the contact information provided on the product packaging.
