1. Hyrje
The HID RK40 iCLASS SE Smart Card Reader with Keypad is a versatile access control device designed for secure identification. It supports 13.56 MHz contactless smart card technology and offers dual authentication options: contactless card presentation combined with a Personal Identification Number (PIN), or single-factor authentication using either a card or a PIN. The keypad features a durable, weatherproof design with tactile response and backlit numbering, suitable for various environmental conditions.
2. Informacion mbi sigurinë
- Lexoni me kujdes të gjitha udhëzimet përpara instalimit dhe përdorimit.
- Instalimi duhet të kryhet nga personel i kualifikuar në përputhje me kodet lokale të energjisë elektrike.
- Sigurohuni që të jetë shkëputur energjia elektrike përpara se të kryeni ndonjë instalim elektrik ose mirëmbajtje.
- Do not expose the device to extreme temperatures or corrosive substances beyond its specified operating conditions.
- Use only approved power supplies and cables.
3. Përmbajtja e paketës
Verifikoni që të gjitha sendet janë të pranishme në paketim:
- HID RK40 iCLASS SE Smart Card Reader with Keypad
- Pajisjet e montimit (vida, spiranca)
- Udhëzuesi i instalimit (ky dokument)
4. Produkti i Mbaruarview
The image below illustrates the front and rear views of the HID RK40 reader, highlighting its keypad and wiring connections.
This image displays both the front and back of the HID RK40 reader. The front features a black housing with a numeric keypad (0-9, *, #) and the HID logo. The back reveals the product label, indicating 'iCLASS SE RK40', and a multi-colored wiring harness for connection to an access control panel.
The front panel includes a 12-position keypad for PIN entry and an integrated smart card reader. The rear panel contains the wiring connections for power, data, and control signals.
5. Konfigurimi
5.1 Montimi
- Select a suitable mounting location, ensuring it is flat and secure.
- Përdorni shabllonin e montimit të dhënë (nëse ka) për të shënuar pikat e shpimit.
- Shponi vrima pilot për vidhat e montimit.
- Route the wiring through the wall or mounting surface.
- Secure the reader to the mounting surface using the provided screws. Do not overtighten.
5.2 Instalimet elektrike
Connect the reader to the access control panel according to the panel's specifications and the wiring diagram below. Ensure all connections are secure and insulated.
| Ngjyra e telit | Funksioni | Përshkrimi |
|---|---|---|
| E kuqe | Fuqia (+) | Connect to +5VDC to +16VDC power supply. |
| E zezë | Tokë (-) | Connect to power supply ground. |
| E gjelbër | Data 0 (Wiegand) | Wiegand Data 0 output. |
| E bardha | Data 1 (Wiegand) | Wiegand Data 1 output. |
| Kafe | Kontrolli LED | Controls the reader's LED indicator. |
| portokalli | Kontrolli i Biperit | Controls the reader's audible beeper. |
| E verdha | Mbaje | Input for holding card data. |
| Blu | OSDP Data (RS-485) | OSDP communication line. |
| vjollce | OSDP Data (RS-485) | OSDP communication line. |
Note: Specific wiring configurations may vary based on the access control system. Refer to your system's documentation for detailed instructions.
6. Udhëzimet e funksionimit
6.1 Card Presentation
To gain access using a smart card:
- Present your iCLASS SE smart card within close proximity to the reader's front surface.
- The reader will emit an audible beep and/or illuminate an LED to indicate a successful read.
- If configured for card-only access, the access control system will grant or deny access based on the card's credentials.
6.2 PIN Entry (Keypad)
For systems requiring PIN entry (either standalone or combined with a card):
- If required, present your smart card first (refer to 6.1).
- Enter your Personal Identification Number (PIN) using the numeric keypad.
- Press the '#' key (or as configured by your system) to confirm the PIN entry.
- The reader will provide feedback (beep/LED) indicating acceptance or rejection of the PIN.
7. Mirëmbajtja
- Pastrimi: Pastroni sipërfaqen e lexuesit periodikisht me një sfungjer të butë.amp pëlhurë. Mos përdorni pastrues gërryes ose tretës.
- Inspektimi: Regularly inspect the reader for any signs of physical damage or loose connections.
- Firmware: Consult your system administrator for information on firmware updates.
8. Troubleshooting
| Problem | Shkaku i mundshëm | Zgjidhje |
|---|---|---|
| Lexuesi nuk ndizet. | Nuk ka furnizim me energji elektrike; instalime elektrike të gabuara. | Kontrolloni lidhjet e energjisë dhe sigurohuni që volumi i saktëtage. Verify wiring according to Section 5.2. |
| Card not read. | Card not compatible; card damaged; incorrect presentation. | Ensure card is iCLASS SE compatible. Try another card. Present card closer to the reader. |
| PIN entry not accepted. | Incorrect PIN; system not configured for PIN. | Verify the correct PIN. Consult your system administrator to confirm PIN configuration. |
| No LED or audible feedback. | LED/Beeper control wiring issue; disabled in system. | Check Brown and Orange wire connections. Consult system administrator for configuration. |
If issues persist, contact technical support.
9. Specifikimet
- Modeli: RK40
- Teknologjia: 13.56 MHz iCLASS SE Smart Card
- Lidhshmëria: Wiegand, OSDP (RS-485), USB Type A (for configuration/diagnostics)
- Dimensionet: 7.1 x 4.7 x 1.8 inç (180.34 x 119.38 x 45.72 mm)
- Pesha: 10.7 ons (303.34 gram)
- Furnizimi me energji elektrike: +5VDC në +16VDC
- Karakteristikë e veçantë: Waterproof keypad
- Certifikimi mjedisor: RoHS, WEEE
- Prodhuesi: Korporata Globale HID
10. Informacioni i garancisë
HID Global Corporation warrants its products against defects in materials and workmanship under normal use and service for a specified period from the date of purchase. For detailed warranty terms and conditions, please refer to the official HID Global website or contact your authorized distributor. This warranty does not cover damage caused by improper installation, misuse, unauthorized modification, or acts of nature.
11. Mbështetje Teknike
For technical assistance, troubleshooting, or further information regarding the HID RK40 iCLASS SE Smart Card Reader with Keypad, please contact HID Global Technical Support or your local authorized HID Global partner. Support resources, including FAQs and documentation, may also be available on the official HID Global webfaqe.
