Manualet+

VEMER VP888200

VEMER Logik Micro DW Digital Timer Switch VP888200 User Manual

Modeli: VP888200

1. Hyrje

The VEMER Logik Micro DW VP888200 is a compact digital daily and weekly timer switch designed for precise management of electrical loads. This device features a modular 1 DIN unit design, an LCD display, and supports up to 20 ON/OFF or impulse programs with a 1-minute resolution. It is ideal for automating various electrical circuits in residential or commercial settings.

2. Informacion mbi sigurinë

Please read these safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or damage to the device.

3. Produkti i Mbaruarview

The VEMER Logik Micro DW is a compact digital timer switch designed for DIN rail mounting. It features a clear LCD display for programming and status indication.

3.1. Physical Dimensions and Wiring Diagram

The following image illustrates the front and side dimensions of the Logik Micro DW, along with its electrical wiring diagram.

VEMER Logik Micro DW VP888200 Front, Side View dhe Diagrama e instalimeve elektrike

Përshkrimi i imazhit: This image displays three views of the VEMER Logik Micro DW VP888200. On the left, the "Vista frontale" (Front view) shows the device's height as 88mm and width as 18mm. In the center, the "Vista laterale" (Side view) indicates a depth of 60mm and a DIN rail clip height of 45mm. On the right, the "Schema" (Wiring Diagram) illustrates the electrical connections: L (Line) and N (Neutral) inputs, and the relay contacts labeled 1, 2, 3, 4, 5, 6. The diagram shows the internal relay switching between contacts for load control.

  • Përpara View: Height 88mm, Width 18mm.
  • Anash View: Depth 60mm, DIN rail clip height 45mm.
  • Diagrami i lidhjes:
    • L (Line) and N (Neutral): Hyrja e furnizimit me energji elektrike.
    • Kontaktet e stafeve: The device features a single changeover relay (1 NO/NC contact). Connect the load according to the desired switching configuration.

4. Konfigurimi

4.1. Instalimi

  1. Shkëputja e energjisë: Ensure the main power supply to the electrical panel is disconnected before beginning installation.
  2. Montimi: Mount the Logik Micro DW onto a standard 35mm DIN rail. The device occupies 1 DIN module.
  3. Lidhja elektrike: Refer to the wiring diagram in Section 3.1.
    • Connect the Line (L) and Neutral (N) power supply wires to the designated terminals.
    • Connect the electrical load to the relay output terminals. The device has one changeover contact.
  4. Lidhje të sigurta: Ensure all wire connections are secure and properly tightened.
  5. Rivendosja e energjisë: Pasi të përfundojë instalimi dhe të verifikohet, rivendosni energjinë në panelin elektrik.

4.2. Initial Power-Up and Time Setting

Upon initial power-up or after a prolonged power outage, the display may show default settings or require time synchronization.

  1. Aktivizimi i ekranit: The LCD display will activate. If it's blank, ensure power is supplied correctly.
  2. Cakto orën dhe ditën aktuale: Use the device's buttons (refer to the specific button layout on the device, not detailed in provided data) to set the current time and day of the week. This is crucial for accurate program execution.

5. Udhëzimet e funksionimit

The Logik Micro DW allows for daily and weekly programming of electrical loads.

5.1. Mënyrat e Programimit

  • Daily Programming: Programs repeat every day at the same set time.
  • Programimi javor: Programs can be set for specific days of the week or groups of days.

5.2. Setting ON/OFF Programs

The device supports up to 20 ON/OFF programs. Each program consists of an ON time and an OFF time.

  1. Hyni në modalitetin e programimit: Press the designated button (e.g., "PROG" or "SET") to enter the programming menu.
  2. Zgjidhni Numrin e Programit: Choose an available program slot (e.g., P1, P2, ..., P20).
  3. Cakto kohën e ndezjes: Input the desired time for the load to switch ON.
  4. Cakto kohën e fikjes: Input the desired time for the load to switch OFF.
  5. Zgjidhni Ditët: Choose the days of the week for the program to be active (e.g., Mon-Fri, Sat-Sun, or specific days).
  6. Programi i ruajtjes: Confirm and save the program. Repeat for additional programs.

The programming resolution is 1 minute, allowing for precise control.

5.3. Impulse Programming

The device also supports impulse programming, where the relay briefly activates for a set duration.

  1. Hyni në modalitetin e programimit: Hyni në menunë e programimit.
  2. Select Impulse Program: Choose an impulse program slot.
  3. Set Impulse Time: Define the time when the impulse should occur.
  4. Set Impulse Duration: Specify how long the relay should remain active (e.g., 1-59 seconds).
  5. Zgjidhni Ditët: Choose the days for the impulse program.
  6. Programi i ruajtjes: Konfirmo dhe ruaj.

5.4. Anulimi manual

The device typically includes a manual override function to temporarily switch the load ON or OFF independently of the programmed schedule. Consult the device's physical buttons or display menu for this function.

6. Mirëmbajtja

6.1. Pastrimi

To clean the device, gently wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray liquids directly onto the device.

6.2. Battery Reserve

The Logik Micro DW features a rechargeable lithium battery that provides a power reserve of approximately 3 years. This reserve maintains the time and programmed settings during power outages. The relay will only switch in the presence of mains power.

  • The battery is internal and not user-replaceable.
  • Regular operation with mains power will keep the battery charged.

7. Troubleshooting

ProblemShkaku i mundshëmZgjidhje
Ekrani është bosh.No power supply to the device.Check the main circuit breaker and wiring connections (L and N terminals).
Programet nuk po ekzekutohen.Incorrect time/day setting; Programs not saved; Manual override active; Power outage.Verify current time and day. Re-enter and save programs. Check manual override status. Ensure continuous power supply.
Load does not switch ON/OFF.Incorrect wiring of the load; Exceeded load capacity; Faulty load.Verify load wiring according to the diagram. Ensure load current does not exceed 16A. Test the load independently.
Time drifts or resets frequently.Low internal battery reserve.Ensure the device is continuously powered for several hours to allow the internal battery to recharge. If the issue persists after prolonged charging, the device may require service.

8. Specifikimet

VeçoriDetaj
ModelVP888200
Furnizimi me energji elektrike230 V AC ± 10% (50/60 Hz)
Prodhimi1 changeover relay (1 NO/NC contact)
Vlerësimi i Kontaktit16 A at 250 V AC (cos(Φ)=1)
Numri i Programeve20 programe ndezjeje/fikjeje
Rezolucioni i programimit1 minutë
Rezerva e energjisë3 years (rechargeable lithium battery)
Temperatura e funksionimit-10 °C to +50 °C
Temperatura e ruajtjes-10 °C to +60 °C
Diplomë MbrojtjejeIP40
EkraniLCD (no backlight)
MontimiDIN rail (1 module)
Dimensionet (H x P x D)88mm x 18mm x 60mm (approximate, based on diagram)

9. Garanci dhe Mbështetje

VEMER products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official VEMER webfaqe.

For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact VEMER customer support through their official channels. Ensure you have your product model number (VP888200) and purchase details available when contacting support.

Official VEMER Webfaqe: www.vemer.it

Dokumente të Ngjashme - VP888200

Paraview Vemer duo BT VE799900: Bluetooth Time Switch User Manual
Comprehensive user manual for the Vemer duo BT VE799900, detailing installation, configuration, operation, and troubleshooting of this Bluetooth-enabled astronomical time switch with two independent relays.
Paraview Vemer PC RF8 Radiofrequency Loads Control User Manual
User manual for the Vemer PC RF8 Radiofrequency Loads Control unit and RX.16A actuators. Provides installation, operation, and configuration instructions to prevent electrical blackouts due to overload.
Paraview Vemer MKCT032-2013 Digital Chronothermostat Technical Data Sheet
Comprehensive technical data sheet for the Vemer MKCT032-2013 weekly flush-mounting digital chronothermostat, detailing its features, specifications, and operational parameters for precise temperature control and energy efficiency.
Paraview Vemer ThermoPro Chronothermostat for Radiators User Manual
Comprehensive user manual for the Vemer ThermoPro weekly chronothermostat for radiators, covering installation, operation, programming, and advanced functions to optimize heating control.
Paraview Manuali i Përdoruesit të Termostatit të Radiatorit të Programueshëm Vemer ThermoPro
Manuali i përdoruesit për termostatin e programueshëm të radiatorit Vemer ThermoPro (modeli VE740700). Mësoni rreth instalimit, programimit, funksioneve dhe veçorive të sigurisë për kontroll efikas të ngrohjes së shtëpisë.
Paraview Manuali i Përdoruesit të Termostatit Dixhital të Programueshëm Vemer Dafne
Manual gjithëpërfshirës përdorimi për termostatin dixhital të programueshëm Vemer Dafne, që mbulon instalimin, programimin, funksionimin, sigurinë dhe specifikimet teknike për një kontroll efikas të klimës në shtëpi.