Inxhinieri Radiale R800 0155

Radial StageBug SB-5W 2-Channel Wall-Mount Stereo Direct Box

Modeli: R800 0155

1. Hyrje

The Radial StageBug SB-5W is a compact, 2-channel wall-mount stereo direct box designed to convert unbalanced consumer-level audio signals into balanced, professional-level signals. This device is ideal for integrating laptops, smartphones, CD players, and other consumer audio devices into professional sound systems, reducing noise and ensuring optimal audio quality. Its wall-mount design allows for discreet and permanent installation in studios, venues, or control rooms.

2. Informacion mbi sigurinë

Please read and understand all safety instructions before operating this device. Failure to do so may result in injury or damage to the unit or other equipment.

  • Siguria elektrike: This unit contains passive components and does not require external power. Ensure all connected equipment is properly grounded to prevent electrical hazards.
  • Instalimi: Installation should be performed by a qualified professional in accordance with local electrical codes. Ensure the mounting location is secure and free from moisture.
  • Mjedisi: Do not expose the unit to water, excessive moisture, or extreme temperatures. Operate in a well-ventilated area.
  • Pastrimi: Disconnect all cables before cleaning. Use a dry, soft cloth. Do not use liquid cleaners or solvents.
  • Servisimi: Mos u përpiqni ta servisoni vetë këtë njësi. Ia drejtoni të gjitha serviset personelit të kualifikuar të shërbimit.

3. Karakteristikat kryesore

  • Wall-mounted design for permanent installation.
  • Dual isolation transformers for noise reduction.
  • 1/8-inch TRS and L/R RCA input terminals.
  • Front-panel level control.
  • Mono fold-down switch for summing stereo signals.
  • Ground-lift switch to eliminate hum and buzz.
  • Converts unbalanced consumer signals to balanced pro-level outputs.

4. Konfigurimi dhe instalimi

The Radial StageBug SB-5W is designed for installation into a standard electrical junction box. Professional installation is recommended.

4.1 Instalimi fizik

  1. Ensure power is off to the junction box before beginning installation.
  2. Mount the SB-5W into a standard electrical junction box using appropriate screws.
  3. Secure the faceplate to the unit.

4.2 Lidhja e Burimeve Hyrëse

The SB-5W accepts two types of stereo input connections: a 1/8-inch (3.5mm) TRS stereo jack and a pair of RCA (Left/Right) jacks.

Përpara view of the Radial StageBug SB-5W showing input jacks and controls.

Figure 1: Front panel of the Radial StageBug SB-5W with 1/8-inch TRS and RCA inputs.

  • 1/8-inch TRS Input: Connect your laptop, smartphone, or tablet directly to the 1/8-inch TRS input jack.
  • Inputet RCA: For devices with RCA stereo outputs (e.g., CD players, turntables), connect the Left and Right RCA cables to the corresponding jacks.
Connection diagram showing a laptop connected to the Radial StageBug SB-5W, which then connects to a mixer and speakers.

Figure 2: Connecting a laptop to the SB-5W.

Connection diagram showing a CD player connected to the Radial StageBug SB-5W, which then connects to a mixer and speakers.

Figure 3: Connecting a CD player to the SB-5W.

Connection diagram showing a tablet connected to the Radial StageBug SB-5W, which then connects to a mixer and speakers.

Figure 4: Connecting a tablet to the SB-5W.

4.3 Connecting Outputs to a Mixer/Console

The SB-5W provides balanced outputs via terminal blocks on the rear of the unit. These outputs are designed to be hard-wired to your console or mixing board using standard twisted-pair balanced audio cable.

E pasme view of the Radial StageBug SB-5W showing the terminal blocks for balanced audio outputs.

Figura 5: E pasme view showing output terminal blocks.

  1. Connect the balanced audio cables from the SB-5W's output terminal blocks to the appropriate input channels on your mixing console or audio interface.
  2. Ensure correct polarity and channel assignment (Left/Right).

5. Operating the SB-5W

The SB-5W features a level control, a mono fold-down switch, and a ground-lift switch on its front panel for easy access and signal management.

Close-up of the Radial StageBug SB-5W front panel showing Level knob, Mono button, and Lift button.

Figure 6: Front panel controls.

5.1 Level Control

The large knob labeled NIVELI adjusts the output volume of the stereo signal. Rotate clockwise to increase the level and counter-clockwise to decrease it. Start with the level at minimum and gradually increase it to achieve the desired output volume without clipping at your mixer.

5.2 Mono Fold-Down Switch

The button labeled MONO, when engaged, sums the left and right stereo input signals into a single mono output. This is useful when feeding a mono sound system or when you need to check for phase issues in a stereo mix. When disengaged, the unit operates in stereo.

5.3 Ground-Lift Switch

The button labeled LIFT activates the ground-lift function. This switch disconnects the audio ground from the chassis ground, which can help eliminate hum and buzz caused by ground loops between the source device and the connected audio system. If you experience hum, try engaging this switch. If the hum persists, ensure all equipment is properly grounded and check cable connections.

6. Mirëmbajtja

The Radial StageBug SB-5W is a robust and passive device designed for long-term reliability with minimal maintenance.

  • Pastrimi: Periodically wipe the unit's surface with a dry, soft cloth to remove dust. Avoid using abrasive cleaners or solvents, as these can damage the finish and labels.
  • Inspektimi: Occasionally check all cable connections for secure fit. Ensure the unit is free from physical damage.
  • Mjedisi: Maintain a stable environment, avoiding extreme temperatures, humidity, or direct sunlight, which can shorten the lifespan of electronic components.

7. Troubleshooting

If you encounter issues with your Radial StageBug SB-5W, refer to the following common problems and solutions:

ProblemShkaku i mundshëmZgjidhje
Nuk ka dalje zëri
  • Lidhjet e gabuara të kabllove
  • Source device not playing audio
  • Mixer input gain too low
  • SB-5W level control set to minimum
  • Verify all input and output cables are securely connected.
  • Ensure the source device is playing audio and its volume is up.
  • Increase the input gain on your mixer.
  • Adjust the LEVEL knob on the SB-5W clockwise.
Hum ose Buzz
  • Lak tokësor
  • Kabllo me defekt
  • Ndërhyrje nga pajisjet e tjera
  • Angazho LIFT (ground-lift) switch on the SB-5W.
  • Provoni një kabllo tjetër audio.
  • Sigurohuni që të gjitha pajisjet të jenë të tokëzuara siç duhet.
  • Move the unit or cables away from power transformers or other sources of electromagnetic interference.
Audio e shtrembëruar
  • Input signal too hot
  • Mixer input gain too high
  • Reduce the output volume from your source device.
  • Reduce the input gain on your mixer.
  • Adjust the LEVEL knob on the SB-5W counter-clockwise.
Only one channel (Left or Right) is working
  • Faulty input cable
  • Mono fold-down switch engaged
  • Problem with source device output
  • Check the stereo input cable (1/8-inch TRS or RCA pair).
  • Sigurimi i MONO switch is disengaged for stereo operation.
  • Test the source device with another stereo input.

If the problem persists after trying these solutions, contact Radial Engineering customer support or a qualified technician.

8. Specifikimet

  • Modeli: R800 0155
  • Pesha e artikullit: 0.01 ons
  • Dimensionet e produktit: 5.1 x 2.85 x 2.15 inç
  • Lloji i lidhësit: 1/8-inch TRS, RCA
  • Wattage: 5 watts (passive device, refers to maximum signal handling)
  • Kanalet e hyrjes: 2 (stereo)
  • Kanalet e daljes: 2 (Balanced, via terminal blocks)
  • Kontrollet: Level, Mono Fold-Down, Ground Lift
  • Izolim: Dual isolation transformers

9. Garanci dhe Mbështetje

Radial Engineering products are designed for durability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Radial Engineering website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact Radial Engineering customer support directly through their webvend ose qendrat e autorizuara të shërbimit.

Burimet në internet: For the latest information, FAQs, and support, please visit the Inxhinieri Radiale webfaqe.

Dokumente të Ngjashme - R800 0155

Paraview Radial StageBug SB-2 Passive Direct Box Quick Start Guide
Quick start guide for the Radial StageBug SB-2, a compact passive direct box for active basses and keyboards. Learn how to connect and use the device with instruments and PA systems, including setup diagrams.
Paraview Udhëzuesi i përdoruesit të Radial JDI Passive Direct Box
Udhëzues gjithëpërfshirës për përdoruesin për kutinë direkte pasive Radial JDI, duke detajuar karakteristikat, specifikimet, aplikimet dhe zgjidhjen e problemeve të saj. Mësoni rreth transformatorit Jensen, impedancës hyrëse/dalëse dhe si të arrini performancën optimale audio.
Paraview Udhëzuesi i përdorimit të Radial J48 Active Direct Box
Udhëzues gjithëpërfshirës përdorimi për Radial J48 Active Direct Box, që detajon karakteristikat, funksionet, specifikimet dhe informacionin e garancisë për aplikacionet profesionale audio.
Paraview Manuali i Përdoruesit të Radial HDI High Definition Studio Direct Box
Manual gjithëpërfshirës i përdoruesit për Radial HDI High Definition Studio Direct Box, që detajon veçoritë, lidhjet, kontrollet e panelit të përparmë dhe të pasmë, specifikimet dhe aplikimet për regjistrim profesional audio dhe performancë live.
Paraview Udhëzuesi i përdorimit të Radial Pro48 Active Direct Box
Comprehensive user guide for the Radial Pro48 Active Direct Box, detailing features, specifications, connection instructions, and troubleshooting for professional audio applications.
Paraview Radial J33 Phono Preamp DI User Guide - Enhance Turntable Audio
Comprehensive user guide for the Radial J33 Phono Preamp DI. Learn about its features, connections, specifications, and how to integrate your turntable into professional and consumer audio systems.