Manuali i Udhëzimeve për Setin e Dorezave Weiser Augusta

Hyrje

The Weiser Augusta Handle Set is a stylishly designed exterior door lock system from the Welcome Home series, engineered to provide maximum-security protection for your home. This handleset features a satin nickel finish, offering a modern aesthetic. It can be securely locked or unlocked using a key from the outside, or with a key or turnpiece from the inside. This manual provides comprehensive instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your handle set.

Figure 1: Weiser Augusta Handle Set components, including the exterior handleset with deadbolt and the interior lever, all in a satin nickel finish.

Konfigurimi dhe instalimi

This section outlines the steps required to properly install your Weiser Augusta Handle Set. Ensure you have all necessary tools before beginning the installation process.

Mjetet e nevojshme:

• Kaçavidë me kokë Phillips
• Shirit matës
• Laps
• Stërvitje (nëse nevojitet përgatitje e derës së re)

Hapat e instalimit:

1. Përgatitni derën: Ensure your door has a 2-1/8 inch cross bore for the handleset. If installing on a new door, follow standard door preparation guidelines for bore holes and backset.
2. Install the Latch and Deadbolt: Insert the latch and deadbolt mechanisms into the door edge. Secure them with the provided screws. Ensure the latch bolt is facing the correct direction for your door swing.
3. Assemble Exterior Handleset: Place the exterior handleset through the bore holes, aligning it with the latch and deadbolt.
4. Assemble Interior Components: Attach the interior mounting plate and lever assembly. Secure all components with the long through-bolts and screws provided.
5. Operacioni i testimit: Before closing the door, test the deadbolt and latch operation with the key from the outside and the turnpiece/key from the inside. Ensure smooth engagement and retraction.
6. Instaloni pllakat e goditjes: Install the strike plates on the door frame, aligning them with the latch and deadbolt. Ensure a secure and flush fit.

Udhëzimet e funksionimit

The Weiser Augusta Handle Set is designed for ease of use and enhanced security.

Bllokimi dhe zhbllokimi:

• Nga ana e jashtme: Insert the key into the deadbolt cylinder and turn to lock or unlock. The handle below the deadbolt is a pull handle and does not require a key for entry once the deadbolt is unlocked.
• Nga pjesa e brendshme: Use the turnpiece on the deadbolt to lock or unlock. The interior lever operates the latch for entry/exit.

SmartKey Re-key Technology:

This handle set features SmartKey re-key technology, allowing you to re-key the lock yourself in seconds. This is useful if you want to match your lock to an existing key or if you lose a key and want to change the lock's keying.

1. Fut çelësin aktual: Insert your currently working key fully into the SmartKey cylinder.
2. Çelësi i kthesës: Rrotulloni çelësin 90 gradë në drejtim të akrepave të orës.
3. Vendosni mjetin SmartKey: While the key is turned, insert the SmartKey tool firmly and fully into the small hole on the cylinder face.
4. Remove Current Key: Remove the current key while keeping the SmartKey tool inserted.
5. Vendos çelës të ri: Insert your new key fully into the cylinder.
6. Remove SmartKey Tool: Remove the SmartKey tool.
7. Testo çelësin e ri: Rotate the new key 180 degrees counter-clockwise to the original position, then remove it. Test the new key to ensure it operates the lock smoothly.

For a visual guide, please refer to the official Weiser SmartKey re-keying video tutorials available on the Weiser website or authorized channels. (Note: No video provided in JSON, so this is a general suggestion).

Mirëmbajtja

Proper maintenance will ensure the longevity and smooth operation of your Weiser Augusta Handle Set.

• Pastrimi: Pastroni sipërfaqet e jashtme me një leckë të butë,amp leckë. Shmangni pastruesit gërryes, tretësit ose kimikatet e ashpra, pasi këto mund të dëmtojnë sipërfaqen prej nikeli saten.
• Lubrifikimi: Periodically apply a silicone-based lubricant (do not use oil-based lubricants) to the internal mechanisms of the lock and deadbolt to ensure smooth operation. Apply sparingly into the keyway and latch bolt.
• Vida shtrënguese: Over time, screws may loosen. Periodically check and tighten all mounting screws to ensure the handleset remains securely fastened to the door. Do not overtighten.

Zgjidhja e problemeve

This section addresses common issues you might encounter with your Weiser Augusta Handle Set.

If you continue to experience issues after attempting these solutions, please contact Weiser customer support.

Specifikimet

Garancia dhe Mbështetja

Weiser stands behind the quality of its products. Your Augusta Handle Set comes with a comprehensive warranty.

Informacioni i garancisë:

Ky produkt mbulohet nga një Garanci e kufizuar gjatë gjithë jetës. This warranty covers defects in material and workmanship for the lifetime of the original residential user. For full details regarding warranty coverage, limitations, and claims procedures, please refer to the official Weiser webfaqe ose kontaktoni mbështetjen e klientit.

Mbështetja e klientit:

For technical assistance, warranty claims, or general inquiries, please contact Weiser customer support through their official channels:

• Webfaqe: Vizitoni Weiser-in zyrtar webfaqe interneti për pyetje të shpeshta, regjistrimin e produkteve dhe formularët e kontaktit. www.weiserlock.com
• Telefoni: Refer to the Weiser webfaqe interneti për numrat e telefonit të shërbimit ndaj klientit rajonal.

When contacting support, please have your product model number (GLA9471 A/A15 SMT VS) and purchase information readily available.