Intermatic ST01 24-Hour In-Wall Timer Instruction Manual

1. Hyrje

This manual provides detailed instructions for the installation, setup, operation, and maintenance of the Intermatic ST01 24-Hour In-Wall Timer. The ST01 is a heavy-duty digital timer designed for in-wall flush mounting, suitable for controlling various electrical loads including incandescent and fluorescent lighting. Please read this manual thoroughly before installation and use to ensure safe and proper operation.

Imazhi 1: Përpara view of the Intermatic ST01 24-Hour In-Wall Timer. This image displays the timer's digital LCD screen and control buttons, designed for flush mounting within a standard wall box.

2. Informacion mbi sigurinë

WARNING: Risk of Electric Shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. Installation should be performed by a qualified electrician or trained personnel.

• Do not install with wet hands.
• Do not use in locations where it may be exposed to water or extreme humidity.
• Sigurohuni që të gjitha lidhjet elektrike të jenë të sigurta dhe në përputhje me kodet lokale elektrike.
• This device is rated for 120-277V, 15A, 1800W. Do not exceed these ratings.
• Vetëm për përdorim të brendshëm.

3. Përmbajtja e paketës

Sigurohuni që të gjithë përbërësit janë të pranishëm para se të filloni instalimin:

• Intermatic ST01 24-Hour In-Wall Timer (1 unit)
• Vida Montimi (2 njësi)
• Wire Nuts (3 units)
• Manual udhëzimi (Ky dokument)

4. Instalimi

Ndiqni këto hapa për instalim të sigurt dhe të duhur:

1. Fikni energjinë: Locate the circuit breaker or fuse that supplies power to the switch box where the timer will be installed. Turn off the power completely. Verify power is off using a voltage testues.
2. Hiq çelësin ekzistues: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch, noting which wire was connected to which terminal (typically Line, Load, and Ground).
3. Wire the Timer: The ST01 timer typically has three wires:
   • Black (Line): Lidheni me telin e nxehtë hyrës nga ndërprerësi i qarkut.
   • Red (Load): Connect to the wire going to the light fixture or appliance.
   • E gjelbër (tokë): Connect to the bare copper or green ground wire in the wall box.
   Use wire nuts to secure all connections. Ensure connections are tight and no bare wire is exposed.
4. Montoni kohëmatësin: Gently fold the wires into the wall box. Insert the timer into the wall box and secure it with the provided mounting screws.
5. Instaloni pllakën e murit: Attach a standard wall plate (not included) over the timer.
6. Rivendosni energjinë: Ndizni përsëri energjinë te çelësi i qarkut ose te kutia e siguresave.

Note: The ST01 is designed for flush mounting and requires a standard electrical wall box.

5. Konfigurimi dhe Programimi Fillestar

Pas ndezjes së parë ose pas një fikjeje të energjisëtage, the timer's internal CR2 lithium battery maintains settings, but you may need to set the current time and program schedules.

1. Cakto orën aktuale:
   • Shtypni ORË butonin.
   • Përdorni ORË dhe MINUTE buttons to adjust the current time. The display operates in a 12-hour format (AM/PM).
   • Shtypni ORË përsëri për të ruajtur dhe dalur.
2. Program ON/OFF Schedules: The ST01 allows for multiple ON/OFF programs over a 24-hour period.
   • Shtypni PROG button. The display will show "1 ON".
   • Përdorni ORË dhe MINUTE buttons to set the desired ON time for program 1.
   • Shtypni PROG përsëri. Ekrani do të shfaqë "1 OFF".
   • Përdorni ORË dhe MINUTE buttons to set the desired OFF time for program 1.
   • Repeat for additional programs (e.g., "2 ON", "2 OFF", etc.) as needed.
   • Shtypni ORË to save all programs and return to normal operation.

Refer to the timer's LCD display for visual cues during programming.

6. Operating the Timer

Once programmed, the ST01 timer will automatically switch connected devices ON and OFF according to your set schedules. You can also manually override the timer:

• Manuali ON/OFF: Shtypni MANUAL button to cycle through ON, OFF, and AUTO modes.
  • ON: The connected device will remain ON, overriding all programs.
  • FIKUR: The connected device will remain OFF, overriding all programs.
  • MAKINA: The timer will operate according to the programmed schedules. This is the default operating mode.
• Random Mode (if available): Some models may include a random mode for security. Consult the specific model's features if this is desired.

7. Mirëmbajtja

The Intermatic ST01 timer requires minimal maintenance:

• Pastrimi: Wipe the timer's surface with a soft, damp pëlhurë. Mos përdorni pastrues gërryes ose tretës.
• Bateria: The internal CR2 lithium battery maintains time and program settings during power outages. This battery is typically long-lasting and not user-replaceable. If the display becomes dim or settings are lost frequently, professional servicing may be required.
• Inspektimi: Periodically inspect the timer and wall plate for any signs of damage or loose connections.

8. Troubleshooting

9. Specifikimet

• Modeli: ST01
• Lloji: 24-Hour In-Wall Digital Timer
• Vëlltage: 120 - 277 V
• Ampegërsi: 15 A
• Fuqia: 1800 W
• Polakët: 1
• Operacioni: ON/OFF, Digital, LCD Display
• Vendosja e kohës: Formati 12-orësh
• Bateria: CR2 Lithium (for memory backup)
• Temperatura e funksionimit: 32°F deri në 104°F (0°C deri në 40°C)
• Montimi: Montimi në skuqje
• Dimensionet (në përgjithësi): 2.75" H x 1.75" W x 1.46" D (70mm H x 44mm W x 37mm D)
• Ngjyra: E bardha
• Materiali: Metal
• Certifikatat: Certifikuar CSA
• Përputhshmëria: Incandescent, Fluorescent lighting
• Pesha e artikullit: 8 ons (rreth 227 gram)

10. Garancia dhe Mbështetja

For warranty information and technical support, please contact Intermatic customer service. Keep your purchase receipt as proof of purchase.

Shërbimi i Klientit Intermatik:

• Webfaqe: www.intermatic.com
• Refer to the official Intermatic webfaqe interneti për informacionin më të fundit të kontaktit dhe detajet e garancisë.