DYNAUDIO Emit M10 Bookshelf Speaker Instruction Manual

Hyrje

Thank you for choosing the DYNAUDIO Emit M10 Bookshelf Speakers. The M10 is the most compact model in the Emit range, designed to provide high-end audio performance. These speakers feature a 28 mm soft dome tweeter and a 14 cm MSP (Magnesium Silicate Polymer) mid/bass driver, coupled with a 1st order crossover. The Emit M10 is engineered for easy integration with various amplifiers, offering a 6 ohm impedance and an expertly tuned bass-reflex cabinet for impressive low-frequency response.

This manual provides essential information for the proper setup, operation, and maintenance of your new speakers to ensure optimal performance and longevity.

Informacion i rëndësishëm për sigurinë

• Lexojini këto udhëzime me kujdes përpara se ta vini në punë produktin.
• Mbani këto udhëzime për referencë në të ardhmen.
• Kushtojini vëmendje të gjitha paralajmërimeve në produkt dhe në udhëzimet e përdorimit.
• Ndiqni të gjitha udhëzimet.
• Mos e përdorni këtë aparat pranë ujit.
• Pastroni vetëm me një leckë të thatë.
• Mos bllokoni asnjë hapje ventilimi. Instalojeni në përputhje me udhëzimet e prodhuesit.
• Mos e instaloni pranë ndonjë burimi nxehtësie si radiatorë, regjistra ngrohjeje, soba ose aparate të tjera (përfshirë amplifiers) që prodhojnë nxehtësi.
• Përdorni vetëm bashkëngjitje/pajisje shtesë të specifikuara nga prodhuesi.
• Referojuni të gjitha servisimet te personeli i kualifikuar i shërbimit. Servisimi kërkohet kur aparati është dëmtuar në çfarëdo mënyre, si p.sh. kordoni i furnizimit me energji elektrike ose spina është dëmtuar, lëngu është derdhur ose objekte kanë rënë në aparat, aparati është ekspozuar ndaj shiut ose lagështisë, nuk funksionon normalisht , ose është hequr.

Përmbajtja e paketës

Carefully unpack your DYNAUDIO Emit M10 speakers and verify that all items are present:

• DYNAUDIO Emit M10 Bookshelf Speakers (Pair)
• Grills (Pair)
• Manual udhëzimi (ky dokument)

Nëse ndonjë artikull mungon ose është dëmtuar, ju lutemi kontaktoni menjëherë shitësin tuaj.

Konfigurimi

Vendosja e altoparlantit

Proper speaker placement is crucial for optimal sound quality. Consider the following guidelines:

• Distanca nga Muret: Bookshelf speakers generally benefit from being placed a short distance from the rear wall to allow the bass-reflex port to function correctly and prevent excessive bass. Experiment with distances from 6 inches to 2 feet (15-60 cm).
• Lartësia: Position the speakers so that the tweeters are approximately at ear level when you are seated in your primary listening position. This often means placing them on dedicated speaker stands or sturdy shelves.
• Trekëndëshi Stereo: For a stereo setup, place the speakers and your listening position to form an equilateral triangle. The distance between the speakers should be roughly equal to the distance from each speaker to your listening position.
• Futje me gishta: Experiment with angling the speakers slightly inward towards your listening position (toe-in). This can improve imaging and soundstagfokusi.

Imazhi: Përpara view of the white DYNAUDIO Emit M10 Bookshelf Speaker with the protective grill attached.

Imazhi: Përpara view of the white DYNAUDIO Emit M10 Bookshelf Speaker, showing the tweeter and mid/bass driver without the grill.

Duke u lidhur me një Ampmë i gjallë

The DYNAUDIO Emit M10 speakers are passive speakers and require an external amplifier for operation. Follow these steps to connect your speakers:

1. Fike: Siguroni tuaj ampçliruesi është i fikur dhe i shkëputur nga priza e energjisë përpara se të bëni ndonjë lidhje.
2. Kabllot e altoparlantëve: Use high-quality speaker cables. Strip approximately 1/2 inch (1.25 cm) of insulation from the ends of the speaker wires. Twist the bare strands tightly.
3. Polariteti: It is critical to connect the speakers with correct polarity. Connect the positive (+) terminal (red) on the speaker to the positive (+) terminal (red) on your amplifier. Similarly, connect the negative (-) terminal (black) on the speaker to the negative (-) terminal (black) on your amplifier. Incorrect polarity will result in poor sound quality, particularly in bass response.
4. Lidhje të sigurta: Unscrew the binding posts on the back of the speaker and amplifier, insert the bare wire or banana plug, and tighten securely. Ensure no stray wire strands are touching other terminals, which could cause a short circuit.

Imazh: Pjesa e pasme view of the white DYNAUDIO Emit M10 Bookshelf Speaker, highlighting the bass-reflex port and the speaker wire binding posts.

Funksionimi i altoparlantëve tuaj

Once your speakers are properly connected to an amplifier, you can begin enjoying your audio system.

• Ndezja: Lidheni dhe ndizni tuajin ampmë i gjallë
• Kontrolli i volumit: Filloni me amplifier's volume control at its lowest setting and gradually increase it to a comfortable listening level.
• Periudha e prishjes: Like many high-fidelity audio components, your speakers may benefit from a "break-in" period. This typically involves 50-100 hours of normal use, during which the drivers will loosen up and the sound quality may improve further.
• Grilat: The included grills protect the speaker drivers. You may choose to use them or remove them for a slightly different aesthetic and potentially a subtle change in sound, though the acoustic impact is generally minimal.

Mirëmbajtja

To ensure the longevity and optimal performance of your DYNAUDIO Emit M10 speakers, follow these maintenance guidelines:

• Pastrimi: Dust the speaker cabinets regularly with a soft, dry, lint-free cloth. For stubborn marks, lightly dampen the cloth with water, but avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish.
• Grilat: The speaker grills can be gently cleaned with a soft brush or a vacuum cleaner with a brush attachment.
• Shmangni rrezet e diellit direkte dhe nxehtësinë: Do not expose the speakers to direct sunlight for extended periods or place them near heat sources, as this can cause discoloration or damage to the cabinet and drivers.
• Lagështia: Keep the speakers away from excessive moisture or humidity.
• Mbrojtja e shoferit: Avoid touching the speaker drivers (tweeter and woofer) directly, as this can cause damage.

Zgjidhja e problemeve

Nëse hasni probleme me altoparlantët tuaj, referojuni problemeve dhe zgjidhjeve të zakonshme të mëposhtme:

• Nuk ka zë:
  • Sigurimi i ampÇliruesi është i ndezur dhe i lidhur siç duhet.
  • Kontrolloni të gjitha lidhjet e kabllove të altoparlantëve në të dyja amplifier and the speakers for secure contact and correct polarity.
  • Verifikoni që burimi i saktë i hyrjes është zgjedhur në pajisjen tuaj ampmë i gjallë
  • Confirm the volume is turned up on the ampmë i gjallë
• Tingulli i shtrembëruar:
  • Ulni nivelin e volumit në tuajin amplifier. Mbingarkesa e altoparlantëve mund të shkaktojë shtrembërim.
  • Kontrolloni lidhjet e kabllove të altoparlantëve për çdo fije të lirshme ose qarqe të shkurtra.
  • Sigurimi i amplifier's power output is suitable for the speakers (refer to specifications).
  • Kontrolloni burimin e audios për shtrembërim.
• Bas i dobët:
  • Verify correct speaker polarity (+ to + and - to -) for both speakers. Incorrect polarity will cause bass cancellation.
  • Experiment with speaker placement, moving them closer to a wall can sometimes increase bass response.
• Tinguj të pabarabartëtage / Imaging Issues:
  • Ensure speakers are placed symmetrically and at equal distances from the listening position.
  • Adjust speaker toe-in.

If the problem persists, consult your retailer or qualified service personnel.

Specifikimet

Image: Diagram illustrating the dimensions of the black DYNAUDIO Emit M10 Bookshelf Speaker.

Garancia dhe Mbështetja

Informacioni i Garancisë

Your DYNAUDIO Emit M10 Bookshelf Speakers are covered by a FIVE YEAR MANUFACTURER DEFECT WARRANTYKjo garanci mbulon defektet në materiale dhe prodhim nën përdorim normal. Ju lutemi ruani provën e blerjes për kërkesat e garancisë.

For specific terms and conditions of the warranty, please refer to the documentation provided with your purchase or visit the official DYNAUDIO webfaqe.

Mbështetja e klientit

If you require technical assistance, have questions about your product, or need to initiate a warranty claim, please contact your authorized DYNAUDIO retailer or visit the official DYNAUDIO support webfaqe për ndihmë të mëtejshme.

Please have your product model number (EMIT 10) and proof of purchase ready when contacting support.