Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer User Manual

1. Hyrje

This manual provides essential information for the safe and efficient operation of your Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This printer is designed for various label printing applications, offering both thermal transfer and direct thermal printing capabilities at 203 dpi resolution. It features an LCD display for easy navigation, a tear-off function, a real-time clock, and multiple connectivity options including USB 2.0, two USB host ports, and LAN.

Figure 1: Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This image shows the compact desktop printer with its LCD display and label output slot.

2. Informacion mbi sigurinë

Please read all safety instructions before operating the printer to prevent injury or damage to the device. Keep this manual for future reference.

• Përdorni vetëm kabllon e energjisë që vjen me printerin.
• Mos e ekspozoni printerin ndaj ujit ose lagështirës së tepërt.
• Sigurohuni që printeri të jetë vendosur në një sipërfaqe të qëndrueshme dhe të niveluar.
• Shmangni bllokimin e hapjeve të ventilimit.
• Disconnect power before cleaning or servicing the printer.
• Mos u përpiqni ta hapni ose riparoni vetë printerin. Kontaktoni personelin e kualifikuar të shërbimit.

3. Përmbajtja e paketës

Verifikoni që të gjitha sendet janë të pranishme në paketim:

• Intermec PC43TB01100201 Printer Unit
• Kordoni i energjisë amerikane
• Udhëzues i shpejtë për fillimin (nuk përfshihet në këtë manual)
• Software/Driver CD (may vary by package)

4. Konfigurimi

4.1 Shpaketimi dhe vendosja

1. Hiqeni me kujdes printerin nga paketimi i tij.
2. Place the printer on a flat, stable surface with adequate ventilation.
3. Ensure easy access to power outlets and computer ports.

4.2 Lidhja e energjisë

1. Connect the supplied US power cord to the printer's power input.
2. Futni anën tjetër të kordonit të energjisë në një prizë elektrike të tokëzuar.

4.3 Lidhja me një kompjuter

The PC43TB01100201 printer supports USB and LAN connectivity.

• Lidhja USB: Connect a USB cable (not always included) from the printer's USB 2.0 port to an available USB port on your computer.
• Lidhja LAN: Connect an Ethernet cable (not always included) from the printer's LAN port to your network router or switch.

4.4 Loading Media (Labels/Ribbon)

Refer to the printer's internal diagrams or quick start guide for specific instructions on loading labels and, if using thermal transfer, the ribbon. Ensure the media is correctly aligned for proper printing.

• Hapni kapakun e printerit.
• Place the label roll onto the media supply spindle.
• Feed the labels through the media guides.
• If using thermal transfer, install the ribbon according to the printer's instructions.
• Mbyllni kapakun e printerit.

5. Udhëzimet e funksionimit

5.1 Ndezja/Fikja

• Për të ndezur: Press the power button located on the printer. The LCD display will illuminate.
• Për të fikur: Press and hold the power button until the printer shuts down.

5.2 Përdorimi i ekranit LCD

The LCD display provides status information and allows for configuration changes. Navigate through menus using the control buttons (Push Button Controller Type) adjacent to the display.

• View printer status and error messages.
• Adjust settings such as print darkness, speed, and media type.
• Perform calibration for new media rolls.

5.3 Shtypje

Once the printer is connected to your computer and drivers are installed, you can print labels from compatible software applications. The printer supports Latin fonts.

1. Open your label design software or application.
2. Create or open the label design.
3. Select the Intermec PC43TB01100201 as your printer.
4. Adjust print settings as needed (e.g., number of copies, print quality).
5. Nisni punën e printimit.

The printer features a tear-off function for easy label separation after printing.

6. Mirëmbajtja

6.1 Pastrimi i printerit

Pastrimi i rregullt ndihmon në ruajtjen e cilësisë së printimit dhe zgjat jetëgjatësinë e printerit.

• Koka e printimit: Clean the printhead with an alcohol swab or printhead cleaning wipe when print quality degrades or after every few media roll changes. Ensure the printer is off and cool.
• Platen Roller: Clean the platen roller with an alcohol swab to remove adhesive residue or dust.
• E jashtme: Fshijeni pjesën e jashtme me një të butë, damp pëlhurë. Mos përdorni pastrues gërryes.

6.2 Replacing Media and Ribbon

Replace media rolls and thermal transfer ribbons as they run out. Follow the loading instructions in Section 4.4.

7. Troubleshooting

This section addresses common issues you might encounter. For more complex problems, contact Intermec support.

• Printeri nuk po përgjigjet:
  • Kontrolloni lidhjet e energjisë.
  • Verify USB or LAN cable connections.
  • Restart the printer and computer.
  • Ensure printer drivers are correctly installed.
• Cilësi e dobët e printimit:
  • Clean the printhead (refer to Section 6.1).
  • Adjust print darkness settings via the LCD display or printer driver.
  • Ensure correct media type is selected.
  • Check if the ribbon (for thermal transfer) is correctly installed and not depleted.
• Etiketat nuk ushqehen siç duhet:
  • Reload media, ensuring it is properly aligned in the guides.
  • Calibrate the printer for the loaded media type.
  • Check for any obstructions in the media path.
• LCD Display Error Messages:
  • Consult the printer's on-screen help or the full user manual for specific error code meanings and resolutions.

8. Specifikimet

9. Garancia dhe Mbështetja

For detailed warranty information, please refer to the documentation provided with your purchase or contact your reseller. Intermec provides support for its products.

• Prodhuesi: Intermec
• Numri i modelit: PC43TB01100201
• For technical assistance, visit the official Intermec support webfaqe ose kontaktoni shërbimin e tyre ndaj klientit.