Manuali i Udhëzimeve për Dritën e Natës LED ANKO

Produkti Mbiview

The ANKO 200 Lumen COB Emergency LED Night Light is a versatile, cordless, and portable lighting solution designed for various applications. It features COB (Chip-on-Board) LED technology for bright, efficient illumination and offers multiple mounting options including magnetic attachment and adhesive stickers. This light is ideal for use in wardrobes, camping, kitchens, garages, attics, and for night reading, providing reliable light during power outages or in areas without direct power access.

Karakteristikat kryesore

• 200 Lumen COB LED: Provides bright and wide illumination.
• Pa tel dhe portativ: Battery-operated for flexible placement and easy transport.
• Opsione të shumta montimi: Includes strong magnets for metal surfaces and adhesive stickers for other flat surfaces.
• Funksionimi i thjeshtë i ndërprerës: Easy to turn on and off.
• Dizajni i qëndrueshëm: Suitable for various indoor environments.

Informacioni i Sigurisë

• Mos e ekspozoni pajisjen ndaj temperaturave ekstreme ose rrezet e diellit direkte.
• Mos e zhytni pajisjen në ujë ose lëngje të tjera.
• Përdorni vetëm llojin e specifikuar të baterisë dhe sigurohuni që të keni polaritetin e saktë gjatë instalimit.
• Mbajeni jashtë mundësive të fëmijëve.
• Mos u përpiqni ta çmontoni ose modifikoni pajisjen. Kjo do ta anulojë garancinë.
• Hiqni bateritë nëse pajisja nuk do të përdoret për një periudhë të gjatë kohore për të parandaluar rrjedhjet.

Përmbajtja e paketës

• 1 x ANKO 200 Lumen COB Emergency LED Night Light
• Adhesive Stickers (pre-attached or separate, depending on model variant)
• Manuali i Përdoruesit (ky dokument)
• Note: Batteries are typically not included and must be purchased separately.

Konfigurimi

Instalimi i baterisë

1. Locate the battery compartment cover on the back of the light.
2. Rrëshqisni ose zhbllokoni kapakun për të hapur ndarjen.
3. Insert the required number of AAA batteries (typically 3x AAA, check device markings) according to the polarity indicators (+/-) inside the compartment.
4. Mbyllni mirë kapakun e ndarjes së baterisë.

Opsionet e montimit

The ANKO LED Night Light offers two primary mounting methods:

Montimi magnetik

• The light has built-in magnets on its back.
• Simply attach the light to any ferrous metal surface, such as a refrigerator, metal cabinet, or tool chest.
• Ensure the surface is clean and dry for optimal magnetic adhesion.

Adhesive Sticker Mounting

• If using the adhesive stickers, ensure the desired mounting surface is clean, dry, and smooth.
• Peel off the protective backing from the adhesive sticker(s) on the back of the light.
• Press the light firmly onto the chosen surface for at least 30 seconds.
• Allow the adhesive to set for a few hours (e.g., 24 hours) before applying significant pressure or repositioning.

Udhëzimet e funksionimit

Ndezja/Fikja

The ANKO LED Night Light is operated by a simple toggle switch, typically located on the side or front of the unit.

1. Për të ndezur dritën ON, slide the switch to the "ON" position.
2. Për të ndezur dritën FAKT, slide the switch to the "OFF" position.

Skenarët e përdorimit

• Wardrobes/Closets: Mount inside for easy visibility of clothes and items.
• Kitchen Cabinets: Provide extra light under cabinets or inside pantries.
• Garages/Attics: Illuminate dark corners or work areas where wired lighting is unavailable.
• Camping/Outdoor (sheltered): Use as a portable light source in tents or temporary shelters.
• Ndriçimi i urgjencës: Keep readily available for power outages.
• Night Reading: Attach to a headboard or nearby surface for focused light.

Mirëmbajtja

Pastrimi

• Wipe the exterior of the light with a soft, dry cloth.
• Mos përdorni pastrues gërryes, tretës ose kimikate të ashpra, pasi këto mund të dëmtojnë sipërfaqen.
• Ensure the light is off and batteries are removed before cleaning.

Ndërrimi i baterisë

When the light dims or stops functioning, it is time to replace the batteries.

1. Fikeni dritën.
2. Open the battery compartment as described in the "Battery Installation" section.
3. Hiqni bateritë e vjetra dhe hidhini ato sipas rregullave lokale.
4. Vendosni bateri të reja AAA, duke u siguruar që të keni polaritet të saktë.
5. Mbyllni mirë ndarjen e baterisë.

Zgjidhja e problemeve

Specifikimet

Garancia dhe Mbështetja

ANKO products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your purchase or visit the official ANKO webfaqe interneti. Ruajeni faturën e blerjes si provë të blerjes.

If you encounter any issues or have questions regarding your ANKO LED Night Light, please contact our customer support team:

• Email: support@anko.com (P.sh.ample email, actual contact info may vary)
• Telefoni: 1-800-XXX-XXXX (P.sh.ample phone, actual contact info may vary)
• Webfaqe: www.anko.com (P.sh.ample website, actual contact info may vary)

Please have your model number (B079MDCYM7) and purchase date ready when contacting support.

Shënime të rëndësishme mbi median

Imazhet e produktit: No useful product images were provided in the source data. The image link provided was a "No image available" placeholder. Therefore, no product images could be embedded in this manual.

Videot e produkteve: No official product videos from the seller were found in the provided data. Therefore, no videos could be embedded in this manual.