Manuali i Përdoruesit të Potenciometrit Cermet BOURNS 3852A-162-501A

1. Hyrje

This manual provides essential information for the proper installation, operation, and maintenance of your BOURNS 3852A-162-501A Cermet Potentiometer. Please read these instructions carefully before use to ensure optimal performance and longevity of the device.

The BOURNS 3852A-162-501A is a single-turn cermet potentiometer designed for panel mounting, offering a resistance of 500 Ohms with a 10% tolerance and a 2-watt power rating. Its robust construction makes it suitable for various industrial and electronic applications requiring precise resistance adjustment.

2. Produkti i Mbaruarview

BOURNS 3852A-162-501A Cermet Potentiometer with solder lugs and threaded shaft

Figure 1: BOURNS 3852A-162-501A Cermet Potentiometer. This image shows the potentiometer with its three solder lugs for electrical connection and the threaded shaft for panel mounting and adjustment.

3. Konfigurimi dhe instalimi

3.1 Masat paraprake të sigurisë

Ensure all power is disconnected before installation or wiring.
Vishni pajisje mbrojtëse personale (PPE) të përshtatshme, siç janë syzet e sigurisë.
Handle with care to avoid damaging the terminals or the internal mechanism.

3.2 Udhëzime montimi

Prepare a suitable panel opening for the potentiometer's threaded shaft (6.35mm diameter).
Insert the potentiometer shaft through the panel opening.
Secure the potentiometer to the panel using the provided nut and washer. Tighten firmly but do not overtighten.

3.3 Lidhjet elektrike

The potentiometer features solder lugs for electrical connections. Refer to your circuit diagram for specific wiring. A typical connection involves:

Terminal 1 (End Terminal): Connect to one end of the voltage source or signal.
Terminal 2 (Wiper Terminal): Connect to the output or variable resistance point.
Terminal 3 (End Terminal): Connect to the other end of the voltage source or ground.

Ensure clean, secure solder joints to prevent intermittent connections or resistance fluctuations.

4. Udhëzimet e funksionimit

The BOURNS 3852A-162-501A is a single-turn potentiometer, meaning its full resistance range is covered within one complete rotation of the shaft.

Rregullimi: Rotate the shaft clockwise or counter-clockwise to adjust the resistance value.
Gama e rezistencës: The resistance will vary from approximately 0 Ohms to 500 Ohms as the shaft is rotated from one extreme to the other.
Monitorimi: Use a multimeter or appropriate measurement device to verify the desired resistance or voltage output during adjustment.

Shënim: Avoid forcing the shaft beyond its mechanical stops, as this can cause internal damage to the potentiometer.

5. Mirëmbajtja

The BOURNS 3852A-162-501A Cermet Potentiometer is designed for long-term reliability with minimal maintenance. However, adhering to these guidelines can extend its lifespan:

Pastrimi: Keep the potentiometer free from dust, dirt, and moisture. Use a soft, dry cloth for external cleaning. Avoid using solvents or abrasive cleaners.
Kushtet e mjedisit: Operate and store the potentiometer within its specified temperature and humidity ranges to prevent degradation.
Inspektimi: Periodically inspect solder connections for integrity and ensure the mounting nut remains secure.

6. Troubleshooting

If you encounter issues with your potentiometer, consider the following common troubleshooting steps:

Problem	Shkaku i mundshëm	Zgjidhje
No resistance change / Open circuit	Broken internal element Poor solder connection Damaged terminal	Check continuity with a multimeter. Re-solder connections. Replace the potentiometer if internal damage is suspected.
Intermittent resistance / Noise	Dirty or worn wiper track Lidhje të lirshme	Ensure clean operating environment. Kontrolloni dhe siguroni të gjitha lidhjet elektrike. Consider replacement if wear is significant.
Resistance value out of specification	Incorrect part used Potentiometer damage	Verify the model number and specifications. Zëvendësoni potenciometrin.

7. Specifikimet

Veçori	Detaj
Numri i modelit	3852A-162-501A
Lloji	Cermet Potentiometer
Rezistenca nominale	500 Ohm
Toleranca e Rezistencës	±10%
Vlerësimi i fuqisë	2 Watts
Turns (Electrical/Mechanical)	1 Turn / 1 Turn
Diametri i boshtit	6.35 mm
Dimensionet (J x P x H)	19.05 x 19.05 x 23.55mm (approximate body dimensions)
Lloji i montimit	Solder Lug Panel Mount
Prodhuesi	Burns

8. Informacioni i garancisë

BOURNS products are manufactured to high-quality standards. This potentiometer is covered by the standard manufacturer's warranty against defects in materials and workmanship under normal use. The warranty period typically begins from the date of purchase. Please refer to the official BOURNS website or contact their customer service for detailed warranty terms and conditions specific to the 3852A-162-501A model.

Damage resulting from improper installation, misuse, unauthorized modification, or operation outside of specified environmental limits is not covered by the warranty.

9. Mbështetja e klientit

For technical assistance, product inquiries, or warranty claims, please contact BOURNS customer support:

Webfaqe: Visit the official BOURNS website for product datasheets, application notes, and contact information.
Formulari i kontaktit: Use the contact form available on their website for specific inquiries.
distributor: Contact your authorized BOURNS distributor for local support.

When contacting support, please have your product model number (3852A-162-501A) and purchase details readily available.

	Fletë të dhënash për potenciometrin e zvogëlimit Trimpot Bourns 3059 Specifikime të hollësishme dhe dimensione të produktit për Potenciometrin Trimpot Trimming Potenciometrin Bourns 3059, duke përfshirë karakteristikat elektrike, mjedisore dhe fizike, si dhe informacionin e porosisë.
	Fletë të dhënash për panelin e kontrollit të mbyllur katror me vulë Bourns 3310 Seria 9 mm Fletë të dhënash teknike të detajuara për Panelin e Kontrollit me Vulosje Katrore Bourns 3310 Series 9 mm, duke përfshirë specifikimet elektrike, mjedisore dhe mekanike, dimensionet dhe informacionin e porosisë.
	Fletë të dhënash për potenciometrin rrotullues Bourns PDB12 Seria 12 mm Fletë të dhënash teknike për Potenciometrin Rotary 12 mm të Serisë Bourns PDB12, që detajon karakteristikat elektrike, mjedisore dhe mekanike, dimensionet e produktit dhe informacionin e porosisë.
	Fletë të dhënash për potenciometrin rrëshqitës të gradës së lartë Bourns PTS Series (i vjetëruar) Technical datasheet for the Bourns PTS Series High Grade Slide Potentiometer. This series is obsolete and not recommended for new designs. It details electrical, environmental, and mechanical characteristics, product dimensions, ordering information, and taper characteristics for single and dual gang configurations.
	Bourns Sealed Through-Hole Cermet Trimming Potentiometers Explore Bourns' comprehensive range of sealed through-hole cermet trimming potentiometers, featuring high reliability and diverse applications across aerospace, communications, industrial, and medical markets. Discover detailed specifications, model information, and global sales contacts.
	Fleta e të Dhënave të Pajisjes Mbrojtëse nga Rryma e Alternuar AC për Detyra të Përgjithshme Bourns 1250A Fletë të dhënash teknike për Pajisjen Mbrojtëse nga Rritjet e Vala (SPD) të AC-së për Detyra të Përgjithshme Bourns 1250A, me detaje mbi karakteristikat, karakteristikat elektrike, aplikimet, dimensionet dhe standardet e pajtueshmërisë.

BOURNS 3852A-162-501A