Manuali i Përdoruesit të Mullirit Këndor Flex LBE 17-11 125

1. Produkti i Mbaruarview

The Flex LBE 17-11 125 is a powerful and high-quality angle grinder designed for cutting, deburring, and grinding tasks. It incorporates advanced features for enhanced performance, safety, and durability.

• Microprocessor Electronics: Features soft start, restart interlock after power failure, overload protection, and constant electronics (CDC) for consistent performance.
• Mechanical Brake: Ensures the tool stops quickly, within 3.5 seconds, for increased safety.
• Anti-Kickback Function: Automatically switches off the motor if the disc jams, preventing dangerous kickback.
• Motori me kapacitet të lartë: Designed for high load capacity and efficiency, delivering strong power output.
• Optimized Durability: Efficient air ducting and optimized carbon geometry contribute to a long service life.
• Dust Sealing: Sophisticated dust sealing protects the motor and gearbox from abrasive dust.
• Dizajni ergonomik: Compact and ergonomic form for comfortable handling.
• Tool-Free Guard Adjustment: The protective guard can be adjusted without the need for additional tools.
• SoftVib Handle: Features an integrated patented clamping nut wrench and vibration damping for reduced fatigue.

2. Udhëzimet e sigurisë

Always observe general power tool safety warnings and specific instructions for angle grinders. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.

Siguria e Përgjithshme

• Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, gloves, and a dust mask.
• Sigurohuni që pjesa e punës të jetë e lidhur mirëamptë administruara para operacionit.
• Keep hands clear of rotating parts and the cutting/grinding area.
• Mos e përdorni mjetin në atmosfera shpërthyese, të tilla si në prani të lëngjeve, gazeve ose pluhurit të ndezshëm.
• Mbani larg fëmijët dhe kalimtarët kur përdorni një vegël elektrike.

Siguria elektrike

• Sigurohuni që furnizimi me energji voltage matches the rating on the tool's nameplate.
• Mos abuzoni me kordonin. Asnjëherë mos e përdorni kordonin për të mbajtur, tërhequr ose shkëputur veglën elektrike nga priza. Mbajeni kordonin larg nxehtësisë, vajit, skajeve të mprehta ose pjesëve të lëvizshme.
• Nëse përdorni një vegël elektrike në reklamëamp vendndodhja është e pashmangshme, përdorni një pajisje të mbrojtur nga rryma e mbetur (RCD).

Siguria specifike e mullirit këndor

• Always use the protective guard. Ensure it is correctly positioned and securely fastened.
• Use only discs that are rated for the maximum speed of the grinder and are suitable for the material being worked on.
• Never use cutting discs for side grinding.
• Be aware of the anti-kickback feature; if the disc jams, the motor will shut off. Release the switch and clear the obstruction before restarting.
• Allow the disc to come to a complete stop using the mechanical brake before setting the tool down.

3. Komponentët dhe Karakteristikat

Komponentët kryesorë:

1. Trupi kryesor: Houses the motor, electronics, and gearbox.
2. Roje mbrojtëse: Adjustable, tool-free guard for user protection.
3. SoftVib Handle: Ergonomic side handle with vibration damping and integrated wrench.
4. Butoni i kyçjes së gishtit: Për ndërrime të lehta të diskut.
5. Ndërprerësi i rrëshqitjes: Lockable for continuous operation.
6. Speed Selection Dial: For variable speed control (see Figure 2).
7. Kanalet e ajrit: For motor cooling and dust expulsion.

4. Konfigurimi

Attaching the SoftVib Handle

The SoftVib handle can be screwed into either the left or right side of the gearbox housing, depending on user preference and application. Ensure it is tightened securely.

Montimi i Mbrojtësit

The protective guard is tool-free adjustable. Position it to provide maximum protection for your specific task. Ensure it clicks securely into place.

Installing the Grinding/Cutting Disc

1. Unplug the tool from the power supply.
2. Shtypni dhe mbani shtypur butonin e kyçjes së boshtit.
3. Place the inner clampfutja e fllanxhës në bosht.
4. Vendosni diskun e dëshiruar 125 mm në flanxhën e brendshme, duke u siguruar që të jetë i rrafshët.
5. Vidhosni klamping nut (M14) and tighten it firmly using the integrated wrench in the SoftVib handle.
6. Lëshoni butonin e kyçjes së boshtit.

5. Udhëzimet e funksionimit

Ndezja/Fikur

• To switch on, push the slide switch forward. For continuous operation, push it further forward until it locks into place.
• To switch off, release the slide switch. If locked, press the rear part of the switch to release it.

Kontroll i ndryshueshëm i shpejtësisë

The speed selection dial (Figure 2) allows you to adjust the no-load speed between 2800 and 11500 rpm. Select the appropriate speed for the material and application. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for cutting and grinding.

Using the Mechanical Brake

The integrated mechanical brake stops the disc within 3.5 seconds after the tool is switched off. This enhances safety by quickly stopping rotation.

Working with the Grinder

• Always hold the grinder firmly with both hands.
• Allow the tool to reach full operating speed before contacting the workpiece.
• Apply steady, even pressure. Do not force the tool, as this can lead to overheating or disc damage.
• For cutting, use a slight rocking motion to prevent the disc from binding.
• Be mindful of sparks and debris. Direct them away from yourself and others.

6. Mirëmbajtja

Regular maintenance ensures the longevity and safe operation of your Flex angle grinder.

Pastrimi

• Gjithmonë hiqeni mjetin nga priza përpara se ta pastroni.
• Regularly clean the ventilation slots to prevent dust buildup, which can lead to overheating. Use compressed air if available.
• Fshijeni pjesën e jashtme të mjetit me aditivëamp pëlhurë. Mos përdorni kimikate të forta ose pastrues gërryes.

Furça karboni

The optimized carbon geometry contributes to long brush life. If the tool's performance significantly drops or sparks excessively, the carbon brushes may need inspection or replacement. This should ideally be done by a qualified service technician.

Magazinimi

Store the angle grinder in a dry, secure place, out of reach of children and unauthorized users.

7. Troubleshooting

8. Specifikimet

9. Garancia dhe Mbështetja

Specific warranty details for this product may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for precise information.

Regarding spare parts availability, information is currently unavailable. For technical support, service, or inquiries about replacement parts, please contact Flex customer service or an authorized Flex service center in your region. Contact details can typically be found on the official Flex webnë faqen e internetit ose në paketimin e produktit tuaj.