Hyrje
This manual provides detailed instructions for the installation, operation, and maintenance of the Antari WTR-20 Wireless Remote Kit. This kit is designed to provide wireless control for compatible Antari fog, haze, and snow machines, enhancing operational flexibility.
Produkti Mbiview
The Antari WTR-20 Wireless Remote Kit consists of two main components: a handheld wireless transmitter (remote) and a receiver unit. The receiver connects to your compatible Antari machine, allowing the transmitter to send commands wirelessly.
Imazhi 1: The Antari WTR-20 Wireless Remote Kit. On the left is the silver-colored handheld remote control with four circular buttons labeled A, B, C, and D, and a blue indicator light. On the right is the black receiver unit with a white multi-pin connector at its base, designed to plug into a compatible Antari machine.
Konfigurimi
1. Kontroll i përputhshmërisë
Ensure your Antari machine is compatible with the WTR-20 kit. This kit is designed for use with Antari models: AF-4R, FT-20, S-500, S-500XL, Z-380.
2. Instalimi i Marrësit
- Fike: Before connecting the receiver, ensure your Antari machine is powered off and unplugged from the main power supply.
- Locate Remote Port: Identify the remote control input port on your Antari machine. This is typically a multi-pin connector.
- Lidhni marrësin: Carefully align the receiver's connector with the machine's remote port and push it firmly into place. Do not force the connection.
- Marrës i Sigurt: If applicable, use any provided mounting hardware or integrated clips to secure the receiver unit to the machine, preventing accidental disconnection.
3. Ndezja
Plug your Antari machine back into the power supply and turn it on. The receiver unit should power on automatically, indicated by an LED light (if present).
Udhëzimet e funksionimit
The WTR-20 remote provides basic control functions for your compatible Antari machine. Specific functions of buttons A, B, C, and D may vary slightly depending on the connected machine model. Refer to your machine's specific manual for detailed button assignments.
- Butoni A: Typically activates continuous output or a primary function.
- Butoni B: Often used for momentary output or a secondary function.
- Butoni C: May control output duration or other programmable settings.
- Butoni D: Can be assigned to a specific effect, timer, or other auxiliary function.
When a button is pressed, the blue indicator light on the remote will illuminate, confirming signal transmission. Ensure the remote is within operational range of the receiver for reliable control.
Mirëmbajtja
Battery Replacement (Remote)
The handheld remote is powered by a small battery, typically a 12V A27 or similar. If the blue indicator light does not illuminate or the remote's range decreases significantly, the battery may need replacement.
- Locate the battery compartment on the back or side of the remote.
- Hapeni ndarjen duke përdorur një kaçavidë të vogël ose duke rrëshqitur kapakun.
- Hiqeni baterinë e vjetër dhe vendosni një të re, duke u siguruar që polariteti të jetë i saktë (+/-).
- Mbyllni mirë ndarjen e baterisë.
Pastrimi
Wipe the remote and receiver with a soft, dry cloth. Do not use abrasive cleaners or allow liquids to enter the units.
Zgjidhja e problemeve
| Problem | Shkaku i mundshëm | Zgjidhje |
|---|---|---|
| Telekomanda nuk përgjigjet. | Low or dead battery in remote. Out of range. Receiver not connected or powered. | Replace remote battery. Move closer to the receiver. Ensure receiver is securely connected and machine is powered on. |
| Diapazoni i reduktuar i funksionimit. | Weak remote battery. Obstructions between remote and receiver. Interference. | Replace remote battery. Ensure clear line of sight. Avoid operating near strong radio frequency sources. |
| Machine does not respond to any remote command. | Incorrect receiver connection. Incompatible machine. Machine fault. | Verify receiver is correctly and fully inserted. Confirm machine model is listed as compatible. Test machine with a wired remote if available, or contact Antari support. |
Specifikimet
- Modeli: WTR-20
- Teknologjia e lidhjes: Frekuencat e radios
- Numri maksimal i pajisjeve të mbështetura: 1 (per receiver)
- Pajisjet e përputhshme: Antari AF-4R, FT-20, S-500, S-500XL, Z-380
- Remote Feature: Dizajn ergonomik
- Pesha e artikullit: Approximately 10 pounds (for the kit, including packaging)
- Prodhuesi: Antari
Garancia dhe Mbështetja
For information regarding warranty coverage and terms, please refer to the warranty card included with your product or visit the official Antari website. For technical support, service, or parts inquiries, please contact your authorized Antari dealer or Antari customer service directly.
Antari Official Webfaqe: www.antari.com
