Kuryakyn 6767

Kit për zhvendosjen e bagazhit të motoçikletës Kuryakyn 6767 për Honda Gold Wing - Manuali i Udhëzimeve

Hyrje

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Kuryakyn 6767 Motorcycle Trunk Relocator Kit. This kit is designed to enhance comfort for both rider and passenger by repositioning the motorcycle's trunk. Please read all instructions carefully before beginning installation to ensure proper fitment and safe operation.

Produkti Mbiview dhe Karakteristikat

The Kuryakyn 6767 Trunk Relocator Kit is engineered to improve the ergonomics and comfort on Honda Gold Wing motorcycles. By moving the trunk, it creates additional space for occupants.

  • Moves the motorcycle trunk back 4 inches from the rider and up 1 inch.
  • Designed to improve rider and passenger ergonomics and comfort.
  • Includes an OEM-styled vinyl filler pad to conceal the gap and exposed wiring, providing a clean, integrated appearance.
  • Features a straightforward bolt-on installation process with all necessary hardware included.
  • Specifically compatible with Honda Gold Wing motorcycles.

Çfarë ka në Kuti

The Kuryakyn 6767 Trunk Relocator Kit includes the following components:

  • Trunk Relocator Brackets (2)
  • Plastic Filler Covers (2)
  • OEM-Styled Vinyl Filler Pad (1)
  • All necessary installation hardware
Components of the Kuryakyn 6767 Trunk Relocator Kit, including two black metal brackets, two curved black plastic covers, and a black vinyl filler pad.

This image displays all the components included in the Kuryakyn 6767 Trunk Relocator Kit. It features two sturdy black metal brackets designed for mounting, two curved black plastic panels that serve as covers, and a comfortable black vinyl filler pad with stitching, which conceals gaps and wiring after installation.

Konfigurimi dhe instalimi

Installation of the Kuryakyn 6767 Trunk Relocator Kit requires careful attention to detail. While designed for bolt-on installation, some adjustments may be necessary depending on your specific motorcycle configuration.

Mjetet e kërkuara (nuk përfshihen):

  • Set çelësash standardë metrikë
  • Set prizë
  • Kaçavida
  • Pikëllim rrotullues (rekomandohet)

Hapat e instalimit:

  1. Përgatitja: Ensure the motorcycle is on a stable, level surface. Disconnect the battery to prevent electrical issues during the process.
  2. Trunk Removal: Carefully remove the motorcycle's trunk according to your Honda Gold Wing service manual. Disconnect any electrical connections and the emergency trunk release cable.
  3. Instalimi i kllapave: Mount the Kuryakyn relocator brackets to the designated points on the motorcycle frame using the provided hardware. Ensure all bolts are tightened to the manufacturer's specifications.
  4. Trunk Re-mounting: Attach the trunk to the newly installed relocator brackets. Verify proper alignment and secure all mounting points.
  5. Wiring and Cable Management: Reconnect all electrical wiring. It may be necessary to reroute or extend certain wires and the emergency trunk release cable due to the new trunk position. Ensure all connections are secure and cables are not pinched. Note: Some users have reported the emergency trunk release cable may require an extension for proper functionality after relocation.
  6. Filler Pad and Cover Installation: Position the plastic filler covers and then the vinyl filler pad to cover the gap created by the trunk relocation. Secure them in place as instructed in the included hardware guide.
  7. Kontrolli përfundimtar: Reconnect the battery. Test all trunk functions, including opening, closing, and locking mechanisms, as well as any integrated lighting or audio systems. Verify the emergency trunk release cable operates correctly.

If you encounter difficulties, consult a qualified motorcycle technician.

Operating the Relocated Trunk

Once installed, the trunk will operate as before, but with the added benefit of increased space for the rider and passenger. The relocation provides an additional 4 inches of rearward space and 1 inch of upward clearance, contributing to a more comfortable riding experience, especially on longer journeys.

Mirëmbajtja

To ensure the longevity and proper function of your Kuryakyn Trunk Relocator Kit, follow these maintenance guidelines:

  • Inspektimi i rregullt: Periodically check all mounting hardware for tightness. Vibrations from motorcycle operation can loosen fasteners over time.
  • Pastrimi: Clean the metal brackets and plastic covers with a mild soap and water solution. Avoid abrasive cleaners that could damage the finish.
  • Vinyl Pad Care: Clean the vinyl filler pad with a vinyl-safe cleaner and conditioner to maintain its appearance and prevent cracking.
  • Kontrolli i kabllove: Inspect any rerouted or extended cables (e.g., emergency trunk release, electrical wires) for wear, fraying, or damage. Ensure they are properly secured and not interfering with moving parts.

Zgjidhja e problemeve

Should you encounter issues after installing the Kuryakyn 6767 Trunk Relocator Kit, consider the following:

  • Trunk Misalignment: If the trunk does not close properly or appears misaligned, re-check the mounting brackets and ensure they are installed evenly and securely. Loosen, adjust, and re-tighten as needed.
  • Defektet elektrike: If any electrical components of the trunk (e.g., lights, audio) are not functioning, verify all electrical connections were properly re-established and are secure. Check for pinched wires.
  • Emergency Trunk Release Cable Issues: If the emergency trunk release cable is too short or does not operate smoothly, it may require an extension or careful rerouting to ensure it has sufficient slack and a clear path.
  • Zhurmat e pazakonta: Investigate any new rattles or noises. These often indicate loose hardware. Re-check all fasteners.

If problems persist, it is recommended to consult a professional motorcycle mechanic.

Specifikimet

  • Numri i modelit: 6767
  • Prodhuesi: Kuryakyn
  • Pesha e artikullit: Përafërsisht 2 paund
  • Dimensionet e produktit: Approximately 20 x 9 x 6 inches (packaging/overall kit size)
  • Trunk Relocation: 4 inches rearward, 1 inch upward
  • Përputhshmëria: Honda Gold Wing motorcycles
  • Mbarimi i jashtëm: Machined (brackets)

Garancia dhe Mbështetja

The Kuryakyn 6767 Motorcycle Trunk Relocator Kit includes a limited 1-year manufacturer warranty. For warranty claims, technical support, or further assistance, please contact Kuryakyn customer service directly or visit their official webfaqe.

You can find more information about Kuryakyn products by visiting the Kuryakyn Store on Amazon.

Dokumente të Ngjashme - 6767

Paraview Kuryakyn Adjustable Mirror Relocator Installation Instructions for Harley Street Glide ('06-'13) - Part 6576
Comprehensive installation guide for the Kuryakyn Adjustable Mirror Relocator (Part #6576) designed for Harley-Davidson '06-'13 Street Glide motorcycles. Includes detailed steps, parts list, required tools, torque specifications, and warranty information.
Paraview Udhëzuesi i instalimit të dritës Kuryakyn II për GL1800
Udhëzime gjithëpërfshirëse instalimi për Dritën Fairing Kuryakyn II (Pjesa #7316) të projektuar për motoçikletat Honda GL1800. Ky udhëzues mbulon detajet e montimit, përbërësit e përfshirë, mjetet e nevojshme, montimin hap pas hapi dhe informacionin e garancisë.
Paraview Küryakyn 3230 Rear Accessory Light Plug and Play Harness Installation Guide
Detailed installation instructions for the Küryakyn 3230 Rear Accessory Light Plug and Play Harness. This guide covers parts, tools, step-by-step procedures, and essential safety warnings for motorcycle owners.
Paraview Mbulesat e Transmisionit Kuryakyn Omni për Udhëzimet e Instalimit të GL1800
Udhëzues i detajuar instalimi për Mbulesat e Transmisionit Kuryakyn Omni (modelet 3274 Chrome, 3275 Satin Black) për motoçikletën Honda GL1800. Përfshin listën e pjesëve, udhëzime hap pas hapi, paralajmërime dhe informacion mbi garancinë.
Paraview Udhëzues Instalimi për Dritat Pasqyrë LED Kuryakyn për GL1800 (7513)
Udhëzime instalimi hap pas hapi për dritat pasqyruese LED Kuryakyn (Modeli 7513) për motoçikletat Honda GL1800. Përfshin pjesë, vegla, instalime elektrike, garanci dhe informacion kontakti.
Paraview Udhëzuesi i instalimit të bordeve të pasagjerëve të transformatorit Küryakyn për GL 1800 (Modeli 7006)
Udhëzime zyrtare instalimi për Bordet e Pasagjerëve me Transformator Küryakyn (Modeli 7006) të projektuara për Honda GL 1800. Përfshin listën e pjesëve, mjetet e nevojshme, montimin hap pas hapi, paralajmërime të rëndësishme sigurie dhe informacion mbi garancinë e kufizuar.