1. Mbiview
This manual provides detailed instructions for the LEXON LL128N Fingerprint Padlock. Please read this manual carefully before using the product to ensure proper operation and longevity. This biometric padlock offers secure, keyless access with advanced features for various applications.
2. Karakteristikat e produkteve
- Biometric Fingerprint Recognition: Securely unlock with your fingerprint. Supports up to 10 registered users.
- Ndërtim i qëndrueshëm: Made from stainless steel and zinc alloy for enhanced security.
- Rezistent ndaj motit: IP65 waterproof and dustproof rating, suitable for both indoor and outdoor use.
- Bateria me jetëgjatësi: Up to 3000 unlocks on a single charge. Offers a standby time of up to 12 months.
- Ngarkimi USB-C: Conveniently rechargeable via a Type-C USB cable (included). Full charge in approximately 1.5 hours.
- Dizajn elegant: Designed by Guillaume Delvigne, available in multiple colors.
Image: The LEXON Nomaday Lock showcasing its design and available colors.
3. Përmbajtja e paketës
- LEXON LL128N Fingerprint Padlock
- Kabllo karikimi USB-C
- Manuali i Përdoruesit
4. Konfigurimi
4.1 Initial Fingerprint Registration (Administrator)
Upon first use, the padlock is in default status, meaning any fingerprint can unlock it. You must register the first two fingerprints as administrators. These first two fingerprints are crucial for managing additional users and resetting the device.
- Press and hold your finger on the fingerprint sensor until the dritë blu illuminates. Release your finger.
- Të dritë jeshile will illuminate. Place your finger on the sensor repeatedly from various angles until the green light turns off. This completes the registration of the first administrator fingerprint.
- Ndërsa dritë jeshile is still illuminated, use a different finger and repeat step 2. This registers the second administrator fingerprint.
After completing these 3 steps, the first two fingerprints are successfully set as administrators. The padlock will now only unlock with these registered fingerprints.
Video: Demonstrates the process of setting up administrator fingerprints on the padlock.
4.2 Registering Additional Fingerprints (Users 3-10)
To add more user fingerprints (up to a total of 10), an administrator fingerprint is required.
- Shtypni dhe mbani një gisht administratori on the sensor until the dritë blu illuminates. Release the finger.
- Të dritë jeshile will illuminate. Have the new user place their finger on the sensor repeatedly from various angles until the green light turns off. This registers the new user's fingerprint.
Repeat these steps for each additional user, up to a maximum of 10 fingerprints in total.
4.3 Deleting All Fingerprints (Factory Reset)
To delete all registered fingerprints and restore the padlock to its factory default state (any fingerprint can unlock), follow these steps:
- Place an gisht administratori on the sensor and hold it. The dritë blu will illuminate, then turn e kuqe. Continue holding.
- After the red light illuminates, the dritë jeshile will flash once. Release your finger immediately after the green light flashes.
All fingerprints are now deleted, and the lock is reset to its default state. Any fingerprint can now unlock the device until new administrator fingerprints are registered.
5. Udhëzimet e funksionimit
5.1 Zhbllokimi i drynit
To unlock the padlock, simply place a registered finger on the fingerprint sensor. The padlock will unlock within 0.5 seconds if the fingerprint is recognized.
Image: A hand demonstrating the unlocking process by placing a finger on the sensor.
Video: Shows the quick unlocking action of the fingerprint padlock.
5.2 Kyçja e drynit
To lock the padlock, simply push the shackle down until it clicks into place. The padlock will automatically lock.
6. Charging the Padlock
The LEXON LL128N Padlock is equipped with a rechargeable Lithium-ion battery. When the battery is low, the indicator light will flash red. To charge:
- Locate the USB-C charging port, usually covered by a protective cap.
- Connect the provided USB-C cable to the padlock and to a standard USB power source (e.g., computer, wall adapter).
- Drita treguese do të tregojë statusin e karikimit (p.sh., e kuqe për karikim, jeshile për karikim të plotë).
A full charge takes approximately 1.5 hours and provides power for up to 3000 unlocks or 12 months of standby time.
7. Mirëmbajtja
- Pastrimi: Wipe the padlock with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Sensori i gjurmës së gishtit: Keep the fingerprint sensor clean and dry for optimal performance.
- Porta e karikimit: Ensure the USB-C charging port is free from dust and debris. Keep the protective cap closed when not charging.
- Magazinimi: Store the padlock in a cool, dry place when not in use for extended periods.
Image: The padlock demonstrating its IP65 waterproof capabilities, suitable for various environments.
8. Troubleshooting
| Problem | Shkaku i mundshëm | Zgjidhje |
|---|---|---|
| Padlock does not unlock with registered fingerprint. |
|
|
| Cannot register new fingerprints. |
|
|
| Padlock does not charge. |
|
|
9. Specifikimet
| Markë | LEXON |
| Numri i modelit | LL128N |
| Lloji i bllokimit | Biometric Fingerprint Padlock |
| Materiali | Stainless Steel / Zinc Alloy |
| Dimensionet (J x P x H) | 1.4 x 3.18 x 7.59 cm |
| Pesha | 81.6 g |
| Vlerësimi i papërshkueshëm nga uji/pluhuri | IP65 |
| Gjurmët maksimale të gishtërinjve | 10 |
| Lloji i baterisë | Litium-jon |
| Porta e karikimit | USB-C |
| Koha e karikimit | Përafërsisht. 1.5 orë |
| Zhbllokon për çdo karikim | Deri në 3000 |
| Koha e gatishmërisë | Deri në 12 muaj |
Image: A visual representation of the product's technical specifications.
10. Garancia dhe Mbështetja
The LEXON LL128N Fingerprint Padlock comes with a Garanci 1-vjeçare e prodhuesit nga data e blerjes. Kjo garanci mbulon defektet në materiale dhe mjeshtëri gjatë përdorimit normal.
For warranty claims or technical support, please contact your retailer or visit the official LEXON webfaqe interneti për informacion mbi shërbimin ndaj klientit.
