aigo AZ300 Mid Tower Computer Case User Manual

1. Hyrje

Thank you for choosing the aigo AZ300 Mid Tower Computer Case. This manual provides detailed instructions for the installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before beginning installation to ensure proper setup and safe use.

Figure 1: aigo AZ300 Mid Tower Computer Case (White)

2. Informacion mbi sigurinë

• Always disconnect the power supply from the wall outlet before installing or servicing any components inside the case.
• Handle tempered glass panels with care. They are fragile and can break if dropped or subjected to impact.
• Avoid placing the case in areas with high humidity, extreme temperatures, or direct sunlight.
• Mbajini pjesët e vogla dhe vidat larg fëmijëve.
• Siguroni tokëzimin e duhur për të parandaluar rreziqet elektrike.

3. Produkti i Mbaruarview

3.1 Paneli i Hyrjeve/Daljeve të Përparme

Paneli i përparmë i hyrjeve/daljeve siguron akses të përshtatshëm në portat dhe kontrollet thelbësore.

Figure 2: Front I/O Panel Layout

• Porti Type-C: 1x USB Type-C port for modern connectivity.
• Porta USB 2.0: 1x USB 2.0 port for peripheral connections.
• Porta USB 3.0: 1x USB 3.0 port for high-speed data transfer.
• HD Audio (Headset/Microphone): Separate jacks for audio output and microphone input.
• Reset/LED Button: Resets the system or controls LED lighting (if applicable).
• Butoni i energjisë: Turns the computer on or off.

3.2 Internal Layout and Component Compatibility

The aigo AZ300 case offers a spacious interior designed for various component sizes and efficient cooling.

Figure 3: Internal Component and Cooling Layout

• Pajtueshmëria e motherboard: Supports ATX, Micro-ATX, and ITX motherboards.
• Storage Drive Bays: 2x 2.5" SSD bays and 2x 3.5" HDD bays.
• Gjatësia e GPU: Maximum GPU length of 400mm.
• Gjatësia e PSU: Supports standard ATX power supplies up to 200mm.

4. Udhëzuesi i instalimit

4.1 Përgatitja e Rastit

1. Vendoseni kutinë në një sipërfaqe të sheshtë dhe të qëndrueshme.
2. Carefully remove the tempered glass side panels by unscrewing the thumb screws at each corner. Set the panels aside in a safe place.

Figure 4: Rear-Side View of Case

4.2 Instalimi i pllakës amë

1. Install the I/O shield (if not pre-installed) into the rear opening of the case.
2. Align your ATX, Micro-ATX, or ITX motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's mounting holes.
3. Siguroni pllakën amë me vidat e dhëna.

Figure 5: Motherboard Mounting Areas

4.3 Instalimi i Njësisë së Furnizimit me Energji (PSU)

1. Gjeni zonën e montimit të PSU-së në pjesën e poshtme të pasme të kutisë.
2. Slide your ATX power supply into the designated slot.
3. Secure the PSU to the case with screws from the rear.

4.4 Instalimi i njësisë së ruajtjes

1. SSD 2.5": Mount SSDs to the dedicated 2.5" bays, typically located behind the motherboard tray or in specific drive cages.
2. Disqe të forta 3.5": Install HDDs into the 3.5" drive cages, usually found at the bottom front of the case.
3. Siguroni të gjitha disqet me vidat përkatëse.

Figure 6: Rear Internal View with Drive Bays

4.5 Expansion Card (GPU) Installation

1. Hiqni mbulesat e nevojshme të vendeve të zgjerimit nga pjesa e pasme e kutisë.
2. Vendosni kartën grafike ose kartat e tjera të zgjerimit në slotet përkatëse PCIe në pllakën amë.
3. Siguroni kartat me vida.

4.6 Instalimi i Sistemit të Ftohjes

The aigo AZ300 supports flexible cooling configurations.

• Mbështetja e tifozëve: Multiple 120mm fan mounting points are available at the top, front, and rear.
• Mbështetja e radiatorit: Supports water coolers with radiators of 360mm, 240mm, and 120mm in designated areas.

4.7 Menaxhimi i kabllove

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables for improved airflow and aesthetics.

5. Operacioni

After all components are installed and connected, reattach the tempered glass side panels. Connect your peripherals, monitor, and power cable. Press the power button on the front I/O panel to start your system.

Use the USB ports (Type-C, USB 2.0, USB 3.0) for connecting external devices. The HD Audio jacks are for headphones and microphones.

6. Mirëmbajtja

Regular maintenance helps ensure optimal performance and longevity of your computer components.

6.1 Pastrimi i filtrit të pluhurit

The aigo AZ300 case is equipped with dust filters to prevent dust buildup. Clean these filters periodically.

• Top Magnetic Dust Filter: Gently lift and remove the magnetic dust filter from the top panel. Clean it with compressed air or rinse with water (ensure it's completely dry before reattaching).
• Filtri i pluhurit të PSU: The dust filter for the power supply is located at the bottom of the case. Slide it out for cleaning.

Figure 7: Side Panel and Bottom Dust Filter Location

7. Troubleshooting

• Sistemi nuk ndizet: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Check that the power supply switch is in the 'ON' position. Verify front panel power button connection to the motherboard.
• Pa shfaqje: Confirm the monitor is connected to the graphics card (not the motherboard integrated graphics, unless no dedicated GPU is present). Reseat the graphics card and RAM modules.
• Mbinxehje: Ensure all case fans are spinning and oriented correctly for airflow (intake/exhaust). Clean dust filters and internal components. Verify CPU cooler installation.
• Portat USB nuk funksionojnë: Check that the USB headers from the front panel are correctly connected to the motherboard.

8. Specifikimet

9. Garancia dhe Mbështetja

aigo strives to provide excellent customer service. If you encounter any quality issues with your aigo AZ300 computer case, please contact us directly. We will assist you with troubleshooting and resolution.

For support, please refer to the contact information provided with your purchase or visit the official aigo webfaqe.