1. Hyrje
The EBYTE E32-900T20D is a LoRa wireless module designed for long-range, low-power data transmission. It operates in the 868MHz and 915MHz frequency bands, offering robust anti-interference capabilities and extended communication distances up to 5.5 kilometers. This module integrates a serial port interface, making it suitable for various embedded applications requiring reliable wireless connectivity.
Figura 1: Përpara view of the EBYTE E32-900T20D LoRa Wireless Module.
2. Karakteristikat kryesore
- LoRa Spread Spectrum Technology: Utilizes LoRa Direct Sequence Spread Spectrum for enhanced communication range and interference resistance.
- Dual Frequency Bands: Supports both 868MHz and 915MHz operation.
- High Transmit Power: Features a 20dBm (100mW) transmit power output.
- Distancë e gjatë komunikimi: Capable of transmitting data up to 5.5 kilometers in optimal conditions.
- Ndërfaqja e Portës Seriale: Easy integration with microcontrollers via UART (TX, RX).
- Mënyra të shumta të punës: Offers Transmission, Wake-up, Power Saving, and Deep Sleep modes for flexible power management.
Figure 2: Illustration of LoRa spread spectrum communication benefits.
3. Specifikimet
| Parametri | Vlera |
|---|---|
| Numri i modelit | E32-900T20D |
| Brezat e frekuencës | 868 MHz / 915 MHz |
| Transmetimi i energjisë | 20 dBm (100 mW) |
| Distanca e komunikimit | Deri në 5.5 km (vijë shikimi) |
| Ndërfaqja | UART (Serial Port) |
| Dimensionet (L x W) | 36 mm x 21 mm |
| Prodhuesi | EBYTE |
| Dimensionet e paketës | 2.4 x 2.01 x 0.47 inç |
| Pesha | 0.71 ons |
Figure 3: E32-900T20D module with physical dimensions.
4. Pin Definitions and Hardware Interface
The E32-900T20D module features a standard pin header for integration. For detailed pinout information, including specific functions for VCC, GND, TX, RX, AUX, M0, and M1 pins, please refer to the official EBYTE E32-900T20D datasheet available on the manufacturer's website. Proper connection of these pins to your microcontroller or host device is crucial for correct operation.
- KQV: Hyrja e furnizimit me energji elektrike.
- GND: Lidhja në tokë.
- TX: Transmit data output (connects to RX of host).
- RX: Receive data input (connects to TX of host).
- AUX: Auxiliary pin, often used for status indication (e.g., data ready).
- M0, M1: Mode selection pins, used to configure the module's operating mode.
5. Konfigurimi dhe lidhja
- Furnizimi me energji elektrike: Connect the VCC pin to a stable power source within the module's specified voltage range. Connect GND to the system ground.
- Komunikimi serial: Connect the module's TX pin to the RX pin of your microcontroller or host device, and the module's RX pin to the TX pin of your host device. Ensure both devices share a common ground.
- Lidhja e antenës: Securely attach a compatible 868MHz or 915MHz antenna to the module's antenna connector. An improperly connected or missing antenna can damage the module.
- Zgjedhja e modalitetit: Use the M0 and M1 pins to set the desired operating mode. Refer to the datasheet for specific pin configurations for each mode.
- Konfigurimi i softverit: Configure your host device's UART settings (baud rate, parity, stop bits) to match the module's default or configured settings. The module can often be configured via AT commands through the serial interface.
6. Modalitetet e operimit
The E32-900T20D module supports four distinct operating modes, each optimized for different application requirements:
- Mënyra e transmetimit: This is the standard transparent transmission mode, commonly used for continuous data exchange.
- Wake-up Mode: Designed for low-power applications, this mode allows the transmitter to wake up the receiver by automatically adding a wake-up code before data transmission.
- Mënyra e ruajtjes së energjisë: In this receiver-only mode, the module consumes less power. It can receive data but cannot initiate transmissions.
- Modaliteti i gjumit të thellë: The lowest power consumption mode, where the module's overall power consumption is significantly reduced (e.g., to 2uA), ideal for battery-powered devices requiring minimal activity.
Figura 4: Mbiview of the four working modes.
7. Skenarët e aplikimit
The E32-900T20D LoRa module's long-range and low-power characteristics make it suitable for a wide range of Internet of Things (IoT) and industrial applications:
- Smart Agriculture: Environmental monitoring, irrigation control, livestock tracking.
- Telekomanda me valë: Industrial equipment control, smart home devices.
- Industrial Scene: Sensor data collection, asset tracking, process automation.
- Pajisje të zgjuara që vishen: Low-power communication for wearable devices.
Figura 5: Shembamples of application scenarios for the E32-900T20D module.
8. Troubleshooting
Nëse hasni probleme me modulin tuaj E32-900T20D, merrni në konsideratë hapat e mëposhtëm për zgjidhjen e problemeve:
- Nuk ka komunikim:
- Verifiko furnizimin me energji voltage and ground connections.
- Check serial port wiring (TX to RX, RX to TX).
- Ensure UART baud rate, data bits, parity, and stop bits match on both devices.
- Confirm M0 and M1 pins are set correctly for the desired operating mode.
- Diapazon i shkurtër komunikimi:
- Ensure the antenna is securely connected and is appropriate for the operating frequency (868MHz or 915MHz).
- Check for physical obstructions between modules.
- Verify transmit power settings (if configurable).
- Moduli nuk përgjigjet:
- Perform a power cycle.
- Check for any short circuits or incorrect wiring that might damage the module.
For persistent issues, refer to the official EBYTE datasheet or contact technical support.
9. Mirëmbajtja
To ensure the longevity and optimal performance of your E32-900T20D module:
- Keep the module in a dry environment, away from moisture and corrosive substances.
- Avoid exposing the module to extreme temperatures or sudden temperature changes.
- Handle the module with care to prevent physical damage to components or pins.
- Ensure proper ventilation if operating in an enclosed space.
10. Garancia dhe Mbështetja
The EBYTE E32-900T20D LoRa Wireless Module is manufactured by EBYTE. For detailed warranty information, technical support, and access to the latest datasheets and resources, please visit the official EBYTE webfaqe ose kontaktoni ekipin e tyre mbështetës.
Prodhuesi: EBYTE
zyrtare Webfaqe: http://www.cdebyte.com/
Email mbështetës: service@cdebyte.com
