Manualet+

FLIPSKY FSESC6.6 Plus

Flipsky Dual FSESC6.6 Electronic Speed Controller User Manual

1. Hyrje

The Flipsky Dual FSESC6.6 Plus is an advanced Electronic Speed Controller (ESC) designed for high-performance electric vehicles such as e-bikes, ESK8s, longboards, and DIY skateboarding projects. This manual provides essential information for the proper installation, configuration, and operation of your ESC.

2. Informacion mbi sigurinë

  • Përputhshmëria e firmuerit: It is recommended to keep firmware 5.2 from the factory. New firmware upgrades may damage the ESC.
  • PCB Protection: Do not remove the shrink wrap. This protects the PCB electronic components from impurities or metals, which could result in short circuits or ESC damage.
  • Sigurohuni që të gjitha lidhjet të jenë të sigurta dhe të izoluara siç duhet për të parandaluar rreziqet elektrike.
  • Always wear appropriate safety gear when operating electric vehicles.

3. Përmbajtja e paketës

Verifikoni që të gjitha artikujt janë të përfshirë në paketën tuaj:

  • 1x Dual FSESC6.7+Heatsink
  • 2x ESC Sensor Wires
  • 1x LED Button
  • 1x Mikro USB Kabllo
  • 1x Manual Udhëzues
Contents of the Flipsky Dual FSESC6.6 Plus package
Figure 3.1: Included components of the Flipsky Dual FSESC6.6 Plus. This image displays the ESC with heatsink, sensor wires, LED button, Micro USB cable, and the manual.

Unboxing video

Video 3.1: This video demonstrates the unboxing process of a Flipsky ESC, showing how the components are packaged and removed from the box.

4. Karakteristikat e produkteve

  • Dual FSESC6.7 Plus (Pro switch) based on Dual FSESC6 with Power on/off by pressing the button.
  • Changed the USB port soldering process to SMT soldering instead of manual soldering.
  • Changed the big capacitors to SMT mounting capacitors, and added more MOSFETs on the bottom side.
  • Added CAN bus connector, for more convenient 4WD setup.
Top view of the Flipsky Dual FSESC6.6 Plus Electronic Speed Controller
Figura 4.1: Top view of the Flipsky Dual FSESC6.6 Plus ESC, highlighting its compact design and component layout.
I detajuar view of the Flipsky Dual FSESC6.6 Plus circuit board
Figure 4.2: Close-up of the ESC circuit board, showing the SMT components and capacitor arrangement.

5. Specifikimet

VeçoriDetaj
Emri i modelitFlipsky Dual FSESC6.7 Plus with Anti-Spark Switch Integrated Based on VESC6 Electric 100A 12S ESC Speed Controller for Electric Skateboard
Numri i pjesësFSESC6.6 Plus
Dimensionet (J x P x H)8.03 x 5.63 x 1.54 inç (Paketa)
Size (including heatsink)81x77x20 mm
Pesha0.32 Kilograms (Package)
NgjyraBlack+Yellow
Dimensions of the Flipsky Dual FSESC6.6 Plus Electronic Speed Controller
Figure 5.1: Physical dimensions of the Flipsky Dual FSESC6.6 Plus ESC, including length, width, and height.

6. Konfigurimi dhe instalimi

6.1 Lidhjet e instalimeve elektrike

Follow these steps to correctly connect the ESC to your system components:

  1. Connect the motor phase wires (typically three thick wires) from the ESC to your motors.
  2. Connect the hall sensor wires (smaller multi-pin connector) from the ESC to your motors, if applicable.
  3. Connect the power switch button to the designated port on the ESC.
  4. Connect the battery wires (red for positive, black for negative) to the main power input of the ESC.
  5. Connect the remote receiver to the PPM or UART port on the ESC, depending on your remote type.
  6. Connect any optional accessories such as brake lights, front lights, or horn to their respective ports on the ESC.
Wiring diagram for Flipsky Dual FSESC6.6 Plus
Figure 6.1: Detailed wiring diagram illustrating connections for motors, battery, switch, remote, and accessories.
Close-up of Flipsky Dual FSESC6.6 Plus connections
Figura 6.2: Pamje nga afër view of the various connection ports on the ESC, showing where to plug in different components.

Wiring Connection Video Guide

Video 6.1: This video provides a step-by-step guide on connecting the ESC to motors, hall sensors, battery, and other accessories.

6.2 VESC Tool Configuration

After physical connections, configure the ESC using the VESC Tool software:

  1. Connect the ESC to your computer via the Micro USB cable.
  2. Power on the ESC using the integrated button.
  3. Open the VESC Tool software on your computer.
  4. Click 'Connect' to establish communication between the VESC Tool and the ESC.
  5. Navigate to the 'Motor Setup' tab and set 'Motor Rated Current(A)', 'Li-ion Battery Series(S)', and 'Cell Cut-Off Voltage' according to your motor and battery specifications.
  6. Click the 'Identification Button' and confirm to proceed with motor parameter identification.
  7. Review the parameter identification results to ensure they are correct.
  8. Go to the 'Control Setup' tab and select the appropriate 'Input Signal Type' (e.g., UART for Flipsky remotes).
  9. Choose the desired 'UART Control Mode' and 'Extra Interface' options based on your setup (e.g., Current Gear Reverse Brake, Front/Brake Light and Horn).
  10. Click 'Write Setup' to save all configurations to the ESC.

VESC Tool Configuration Video Guide

Video 6.2: This video demonstrates the process of connecting the ESC to VESC Tool, identifying motor parameters, and configuring control settings.

7. Udhëzimet e funksionimit

7.1 Funksionimi me telekomandë

After successful VESC Tool configuration, you can operate your electric vehicle using a compatible remote control:

  1. Ensure the remote control is paired with the ESC. Confirm the 'Control type' is UART and 'ESC Type' is FTESC on the remote's display.
  2. Use the throttle gear to accelerate and brake. Pull down the throttle gear to activate the rear brake light.
  3. Short press the remote's power button once to turn the front lights on or off.
  4. Press the remote's power button twice quickly to activate or deactivate the horn.

Remote Control Demonstration

Video 7.1: This video demonstrates the basic functions of the remote control, including throttle, brake, and light/horn activation.

7.2 Riding Demonstration

Video 7.2: This video shows the ESC in action on an electric skateboard, demonstrating its performance and control during a ride.

8. Mirëmbajtja

  • Regularly inspect all wiring connections for looseness or damage.
  • Keep the ESC and surrounding components clean and free from dust, dirt, and moisture.
  • Avoid exposing the ESC to extreme temperatures or direct sunlight for prolonged periods.
  • Do not attempt to modify the ESC's hardware or remove the factory-installed shrink wrap.

9. Troubleshooting

  • ESC not responding or locking up: Check all power and signal connections. Ensure the battery is adequately charged. If using a CAN bus setup, verify the CAN switch is correctly positioned.
  • Motor not recognized by VESC Tool: Confirm the USB connection is secure and the ESC is powered on. Try restarting the VESC Tool and reconnecting.
  • Unexpected behavior after firmware update: If you updated the firmware beyond version 5.2 and experience issues, it may be due to incompatibility. Contact Flipsky support for assistance.
  • Intermittent connection with remote: Ensure the remote receiver is securely connected to the ESC and that the remote is fully charged and paired.

10. Garancia dhe Mbështetja

The Flipsky Dual FSESC6.6 Plus comes with a 2-month warranty.

For technical support, troubleshooting assistance, or warranty claims, please contact Flipsky customer service directly.

Dokumente të Ngjashme - FSESC6.6 Plus

Paraview Flipsky 75100 Pro V2.0 ESC me PCB alumini - Fletë të dhënash teknike
Specifikime të hollësishme dhe diagramë instalimesh elektrike për Kontrolluesin Elektronik të Shpejtësisë (ESC) Flipsky 75100 Pro V2.0 me një PCB alumini, me kompatibilitet me serinë VESC 75, me vëllim të lartëtagmbështetje elektronike dhe ndërfaqe të shumëfishta kontrolli.
Paraview Manuali i Përdorimit të Telekomandës FLIPSKY VX5 të Papërshkueshme nga Uji
Manuali i përdoruesit për telekomandën FLIPSKY VX5 të papërshkueshme nga uji, që detajon karakteristikat e saj, diagramet e instalimeve elektrike për mënyrat e kontrollit PPM dhe UART, si dhe paralajmërimet për pajtueshmërinë me FCC. I projektuar për skateboard-e elektrike dhe pajisje të ngjashme.
Paraview Manuali i ESC-së Flipsky FT85BS V1.4
Specifikime të hollësishme, karakteristika dhe diagrama e instalimeve elektrike për Flipsky FT85BS ESC (Kontrolluesi Elektronik i Shpejtësisë) V1.4, i projektuar për automjete elektrike dhe robotikë.
Paraview Flipsky FT85BS V2.0 ESC: Specifikimet dhe Karakteristikat Teknike
Specifikime teknike të detajuara, karakteristika dhe fusha aplikimi për Flipsky FT85BS V2.0 ESC, një kontrollues elektronik shpejtësie për automjetet elektrike dhe robotikën.
Paraview Manuali i Përdoruesit të Telekomandës Flipsky VX4 Pro
Manual gjithëpërfshirës përdorimi për telekomandën Flipsky VX4 Pro, që detajon karakteristikat e saj, diagramet e instalimeve elektrike për mënyrat e kontrollit PPM dhe UART, si dhe udhëzimet e funksionimit për skateboard-et elektrike.
Paraview Manuali i Përdoruesit të Telekomandës FLIPSKY VX5 të Papërshkueshme nga Uji - Karakteristikat, Lidhjet dhe Funksionimi
Manual gjithëpërfshirës përdorimi për telekomandën FLIPSKY VX5 të papërshkueshme nga uji. Karakteristikat e detajuara, paraqitjet e butonave, informacioni i ekranit, diagramet e instalimeve elektrike për modalitetet PPM dhe UART, si dhe udhëzime operative.