Lenz rcB 1200

Manuali i Përdoruesit të Pakos së Litiumit Lenz rcB 1200

Model: rcB 1200

Hyrje

This manual provides essential information for the safe and effective use of your Lenz Lithium Pack rcB 1200. Please read it thoroughly before operating the device and retain it for future reference.

The Lenz Lithium Pack rcB 1200 is a lightweight, rechargeable battery pack designed to power various Lenz heated products, including socks, vests, bandages, and gloves. It offers adjustable heat settings and can be controlled via the pack itself or remotely using a smartphone via Bluetooth.

Përmbajtja e paketës

Udhëzimet e sigurisë

Gjithmonë zbatoni masat paraprake të sigurisë për të parandaluar lëndimet ose dëmtimin e pajisjes:

Konfigurimi

Ngarkimi i paketave të baterive

Before first use, fully charge both Lithium Pack rcB 1200 battery packs.

  1. Connect the USB charging cable to the global USB-charger.
  2. Plug the USB-charger into a standard electrical outlet (100-240 VAC).
  3. Connect the charging cable to the charging port on each Lithium Pack rcB 1200. The charging port is typically located on the side or bottom of the pack.
  4. The charging indicator on the USB cable will show the charging status. A full charge typically takes several hours.
  5. Once fully charged, disconnect the battery packs from the charger.
Lenz Lithium Pack rcB 1200 battery packs and charging cable

Image: Two Lenz Lithium Pack rcB 1200 battery packs. One pack shows the power button and heat level indicators. The other pack shows the snap connectors. Below, a battery pack is shown connected to a charging cable.

Attaching to Heated Products

The Lithium Pack rcB 1200 attaches to compatible Lenz heated products using press studs.

  1. Locate the press studs on your Lenz heated socks, vest, bandage, or gloves.
  2. Align the press studs on the battery pack with those on the heated product.
  3. Firmly press the battery pack onto the product until the studs click into place, ensuring a secure connection.

Udhëzimet e funksionimit

Powering On/Off and Adjusting Heat Levels (Manual Control)

Each battery pack has a power button and indicators for heat levels.

  1. Për të ndezur: Press and hold the power button (usually marked with a 'G' or power symbol) on the battery pack for a few seconds until the indicator lights illuminate.
  2. To Adjust Heat Level: Briefly press the power button to cycle through the three available heat settings. The indicator lights (1, 2, 3) will show the current heat level.
    • Level 1: Lowest heat setting.
    • Level 2: Medium heat setting.
    • Level 3: Highest heat setting.
  3. Për të fikur: Press and hold the power button again for a few seconds until all indicator lights turn off.

Smartphone Control (Bluetooth Smart Ready)

The Lithium Pack rcB 1200 can be controlled remotely via a smartphone application.

  1. Download the official Lenz Heat App from your smartphone's app store (iOS or Android).
  2. Sigurohuni që Bluetooth të jetë i aktivizuar në smartphone tuaj.
  3. Open the Lenz Heat App and follow the on-screen instructions to pair your Lithium Pack rcB 1200 battery packs. The app will guide you through the pairing process.
  4. Once paired, you can use the app to power the packs on/off, adjust heat levels, and monitor battery status.

Mirëmbajtja

Pastrimi

To clean the battery packs, gently wipe them with a damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the packs are completely dry before storing or recharging.

Magazinimi

When storing the battery packs for extended periods, ensure they are charged to approximately 50-70% capacity. Store them in a cool, dry place away from direct sunlight and extreme temperatures. Recharge them every 3-6 months to maintain battery health.

Zgjidhja e problemeve

ProblemShkaku i mundshëmZgjidhje
Battery pack not turning on.Bateria është e mbaruar.Ngarkoni plotësisht paketën e baterisë.
Paketa e baterisë nuk po karikohet.Charger or cable faulty; improper connection.Ensure charger and cable are properly connected. Try a different USB port or outlet. Verify charger is functional.
Heated product not heating.Battery pack not securely attached; battery pack not powered on; battery pack depleted.Ensure battery pack is securely attached via press studs. Power on the battery pack. Charge the battery pack.
Nuk mund të lidhet me anë të Bluetooth.Bluetooth not enabled on phone; battery pack not in pairing mode; app issue.Ensure Bluetooth is on. Restart battery pack and phone. Reinstall Lenz Heat App. Follow app pairing instructions carefully.

Specifikimet

Garancia dhe Mbështetja

For warranty information and technical support, please refer to the official Lenz webfaqen e internetit ose kontaktoni direkt shërbimin e tyre ndaj klientit. Ruajeni provën e blerjes për kërkesat e garancisë.

Prodhuesi: Lenz

Webfaqe: www.lenzproducts.com (P.sh.amplidhja, lidhja aktuale mund të ndryshojë)

Dokumente të Ngjashme - rcB 1200

Paraview Manuali i Përdoruesit dhe Udhëzimet e Sigurisë për Sistemin e Ngrohjes së Trupit LENZ rcB 1400 / rcB 2000
Masa paraprake gjithëpërfshirëse sigurie dhe udhëzime përdorimi për paketën e litiumit LENZ rcB 1400 dhe Sistemin e Ngrohjes së Trupit rcB 2000. Mësoni rreth karikimit, përdorimit, veçorive të sigurisë dhe mirëmbajtjes për performancë optimale.
Paraview Manuali i Përdoruesit për shputën e këpucëve Lenz me pako litiumi rcB 1200
Manual gjithëpërfshirës përdorimi për shtrojën me pako litiumi Lenz rcB 1200, që detajon funksionimin, sigurinë dhe mirëmbajtjen. Mësoni si të përdorni dhe të kujdeseni për shtrojën tuaj me ngrohje.
Paraview Udhëzime sigurie LENZ për produktet tekstile dhe elektronike
Udhëzime sigurie për produktet LENZ që kombinojnë tekstilin dhe elektronikën, duke theksuar përdorimin e paketave të litiumit LENZ të pajtueshme dhe respektimin e masave paraprake të sigurisë për të parandaluar goditjen elektrike, zjarrin dhe lëndimet.
Paraview Udhëzime për sigurinë dhe kujdesin e veshjeve me ngrohje LENZ
Udhëzime sigurie dhe kujdesi për veshjet me ngrohje LENZ, duke detajuar larjen, tharjen dhe përdorimin me pakot e litiumit LENZ për të parandaluar goditjen elektrike, zjarrin dhe lëndimet.