FLEXISPOT M17A-40

Manuali i Udhëzimeve për Konvertuesin e Tavolinës në Këmbë FLEXISPOT M17A-40

Model: M17A-40

Hyrje

Thank you for choosing the FLEXISPOT Standing Desk Converter M17A-40. This manual provides essential information for the safe and efficient use of your new workstation. This 40-inch sit-to-stand desk riser is designed to transform any desk into an ergonomic workspace, allowing for seamless transitions between sitting and standing positions. Its spacious two-tier design accommodates monitors, laptops, keyboards, and mice, promoting comfort and productivity.

Informacioni i Sigurisë

Ju lutemi lexoni dhe kuptoni të gjitha udhëzimet e sigurisë para montimit dhe përdorimit. Mosndjekja e këtyre udhëzimeve mund të rezultojë në lëndim ose dëmtim të produktit.

  • The minimum height of the desktop is 4.7 inches.
  • The maximum weight recommendation for the desktop is 44 pounds.
  • The maximum weight recommendation for the keyboard tray is 4.4 pounds.
  • Always ensure the desk converter is stable and not overloaded.
  • Keep hands and fingers clear of moving parts during height adjustment to prevent pinching or injury.
  • Do not place hot liquids directly on the surface without a coaster.
  • Ensure all cables are properly managed to avoid snagging or damage during height adjustments.

Konfigurimi

The FLEXISPOT Standing Desk Converter M17A-40 arrives almost fully assembled, requiring minimal setup to get started.

  1. Shpalosja e kutisë: Carefully remove the desk converter from its packaging. Place it on a stable, flat surface where it will be used.
  2. Attach Optional Keyboard Tray: The keyboard tray is designed for easy attachment. Align the tray with the designated slots on the underside of the main desktop. Slide it into place until it clicks securely. Ensure both sides are firmly latched.
FLEXISPOT Standing Desk Converter M17A-40 with two monitors and a laptop
The FLEXISPOT Standing Desk Converter M17A-40, ready for use with multiple devices.

Once the keyboard tray is attached, your desk converter is ready to be customized for your workspace.

Udhëzimet e funksionimit

The FLEXISPOT Standing Desk Converter features a powerful gas spring system for smooth and effortless height adjustments.

  1. Rregullimi i lartësisë: To raise or lower the desktop, locate the single lever on the right side of the unit. Squeeze the lever to release the locking mechanism.
  2. Raising the Desktop: While holding the lever, gently lift the desktop to your desired standing height. Release the lever to lock it into position. The gas spring system will assist in the upward movement.
  3. Lowering the Desktop: While holding the lever, gently press down on the desktop to lower it to your desired sitting height. Release the lever to lock it into position.
Illustration showing the height adjustment range of the FLEXISPOT Standing Desk Converter from 4.7 to 19.7 inches
Visual representation of the desk converter's height adjustment capabilities.

Dizajni me 2 nivele ofron ample space for your setup:

  • top tier (40'' width) can comfortably hold a monitor up to 27'' or multiple smaller monitors.
  • base tier (12.1'' depth) is designed for a standard keyboard and mouse, or a 13'' laptop, allowing for ergonomic typing and mouse use.
Nga lart-poshtë view of the FLEXISPOT Standing Desk Converter M17A-40 showing its 40-inch width and 23.2-inch depth, with a laptop and two monitors
Detailed dimensions of the spacious 2-tier desktop.

Mirëmbajtja

Regular maintenance ensures the longevity and smooth operation of your FLEXISPOT Standing Desk Converter.

  • Pastrimi: Fshini sipërfaqet me një të butë, damp leckë. Shmangni pastruesit ose tretësit gërryes që mund të dëmtojnë sipërfaqen.
  • Lubrifikimi: Periodically check the moving parts of the gas spring system. If movement becomes stiff, apply a small amount of silicone-based lubricant to the pivot points.
  • Mbërthyes: Occasionally check all screws and fasteners to ensure they are tight. Retighten if necessary.

Zgjidhja e problemeve

If you encounter any issues with your desk converter, refer to the following common troubleshooting tips:

  • Vështirësia në rregullimin e lartësisë: Ensure the lever is fully squeezed when attempting to adjust the height. Check for any obstructions preventing smooth movement. Verify that the weight on the desktop does not exceed the maximum capacity.
  • Lëkundje: Ensure the desk converter is placed on a flat, stable surface. Check that all components are securely assembled and tightened.
  • Keyboard Tray Loose: Verify that the keyboard tray is correctly inserted into its slots and the locking mechanisms are engaged.

Nëse problemet vazhdojnë, ju lutemi kontaktoni mbështetjen e klientit.

Specifikimet

VeçoriDetaj
MarkëFLEXISPOT
Numri i modelitM17A-40
Dimensionet e produktit23"D x 55"L x 19.7"H
NgjyraE zezë
StiliModerne
Lloji i materialit të lartëDruri
Pesha e artikullit36 paund
Lartësia maksimale19.7 inç
Lartësia minimale4.7 inç
Rekomandimi i Peshës Maksimale (Desktop)44 paund
Maximum Weight Recommendation (Keyboard Tray)4.4 paund
Numri i rafteve2
Asambleja e nevojshmePo (Minimal)

Garancia dhe Mbështetja

The FLEXISPOT Standing Desk Converter M17A-40 comes with a Limited Warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official FLEXISPOT webfaqe.

For customer support, including assistance with assembly, operation, or troubleshooting, please contact FLEXISPOT customer service. Contact information can typically be found on the product packaging or the official FLEXISPOT webfaqe.

Dokumente të Ngjashme - M17A-40

Paraview FlexiSpot M1B/M1W Sit-Stand Desk Converter Installation Guide
Step-by-step installation guide for the FlexiSpot M1B/M1W sit-stand desk converter, including specifications, parts list, safety warnings, and assembly instructions.
Paraview FlexiSpot M7L-US Computer Riser Installation Guide and Warranty
Official installation guide and limited warranty information for the FlexiSpot M7L-US Sit-Stand Desktop Workstation. Learn how to assemble, use, and understand the warranty terms for your FlexiSpot computer riser.
Paraview FlexiSpot EM7L Motorized Computer Riser Installation Guide
Comprehensive installation guide for the FlexiSpot EM7L Motorized Computer Riser. Features include specifications, parts list, step-by-step assembly instructions, troubleshooting tips, and limited warranty information.
Paraview Udhëzuesi i instalimit të ngritësit për kompjuter FlexiSpot M3B/M3W dhe informacioni i garancisë
Udhëzues gjithëpërfshirës instalimi dhe detaje garancie për stacionin e punës FlexiSpot M3B/M3W për kompjuter, ngritësin dhe stacionin e punës për tavolinë, me pozicion ulur-mbajtës. Mësoni si të montoni, përdorni dhe kuptoni mbulimin e produktit.
Paraview Udhëzuesi i Instalimit të Ngritësit të Kompjuterit FlexiSpot ML2B/ML2W
Udhëzues instalimi hap pas hapi për ngritësin e kompjuterit FlexiSpot ML2B/ML2W. Mësoni rreth specifikimeve, pjesëve, mjeteve dhe si ta konfiguroni stacionin tuaj të punës për tavolinë pune në mënyrë të sigurt dhe efektive.
Paraview FlexiSpot ML2B/ML2W Computer Riser Installation Guide and Warranty
Comprehensive installation guide and limited warranty details for the FlexiSpot ML2B/ML2W Computer Riser. This sit-stand desktop workstation guide covers specifications, parts, assembly steps, usage instructions, and warranty coverage from FlexiSpot.