OSRAM Base Classic A FIL 40 LED Bulb E27 Instruction Manual

1. Produkti i Mbaruarview

The OSRAM Base Classic A FIL 40 LED Bulb is a modern, energy-efficient lighting solution designed for general illumination in household and interior applications. This LED bulb provides a warm white light (2700 Kelvin) with a brightness of 470 lumens, equivalent to a traditional 40-watt incandescent bulb, while consuming only 4 watts of power. It features an E27 screw base for easy installation and a long operational life of up to 10,000 hours.

Karakteristikat kryesore përfshijnë:

• Pleasant Light: Delivers good light quality and instant 100% light without warm-up time.
• Dizajn i fortë: Resistant to shocks and vibrations due to advanced LED technology.
• Jetë e gjatë shërbimi: Offers an extended operational life of up to 10,000 hours.
• Kursimi i energjisë: Very low energy consumption, making it highly efficient.
• Temperatura optimale: Generates lower heat compared to standard incandescent bulbs.

Figure 1: OSRAM Base Classic A FIL 40 LED Bulb, showcasing formën e saj klasike dhe bazën E27.

2. Informacion mbi sigurinë

• Siguria elektrike: Always ensure the power supply is switched off before installing, removing, or cleaning the bulb to prevent electric shock.
• Vëlltage Përputhshmëria: This bulb is designed for 220-240 Volts. Ensure your fixture's voltage përputhet me këtë kërkesë.
• Përputhshmëria me dimmer: Ky produkt është not suitable for use with dimmers. Using it with a dimmer may cause damage to the bulb or the dimmer, and will void the warranty.
• Përdorimi i brendshëm: Primarily for indoor use. If used outdoors, it must be installed in a suitable, enclosed outdoor fixture to protect it from elements.
• Gjenerimi i nxehtësisë: While LED bulbs generate less heat than incandescent bulbs, they still produce some heat. Ensure adequate ventilation around the bulb.
• Asgjesimi: Dispose of used bulbs according to local regulations for electronic waste. Do not dispose of with general household waste.

3. Konfigurimi dhe instalimi

Follow these steps to safely install your OSRAM LED bulb:

1. Fike: Before beginning, ensure the power supply to the light fixture is completely switched off at the main switch or circuit breaker.
2. Hiq llambën e vjetër: If replacing an existing bulb, allow it to cool down completely before carefully unscrewing it counter-clockwise from the E27 socket.
3. Inspektoni prizën: Check the E27 socket for any damage or debris. Ensure it is clean and dry.
4. Instaloni llambën e re: Gently screw the OSRAM LED bulb clockwise into the E27 socket until it is finger-tight. Do not overtighten.
5. Rivendosni energjinë: Once the bulb is securely installed, restore power to the light fixture.
6. Test: Ndizni çelësin e dritës për të konfirmuar që llamba po funksionon siç duhet.

Figure 2: Close-up of the OSRAM LED bulb, highlighting the E27 screw base for installation.

4. Operacioni

Operating the OSRAM Base Classic A FIL 40 LED Bulb is straightforward:

• Ndez/fik: Përdorni çelësin standard të murit të lidhur me ndriçuesin tuaj për të ndezur ose fikur llambën.
• Drita e menjëhershme: The LED bulb provides instant 100% light output immediately upon switching on, with no warm-up time required.
• Jo i zbehtë: As noted in the safety section, this bulb is not dimmable. It will operate at full brightness when switched on.

5. Mirëmbajtja

The OSRAM LED bulb requires minimal maintenance:

• Pastrimi: Sigurohuni që llamba të jetë e fikur dhe e ftohtë para se ta pastroni. Fshijeni llambën butësisht me një leckë të butë dhe të thatë. Mos përdorni pastrues të lëngshëm ose materiale gërryese.
• Zëvendësimi: Due to its long lifespan, frequent replacement is not expected. When replacement is necessary, follow the installation steps in Section 3.
• Nuk ka pjesë të servisueshme nga përdoruesi: Llamba nuk përmban pjesë që mund të riparohen nga përdoruesi. Mos u përpiqni ta hapni ose ta riparoni llambën.

6. Troubleshooting

If you encounter issues with your OSRAM LED bulb, refer to the following common troubleshooting steps:

• Llamba nuk ndizet:
  • Sigurohuni që furnizimi me energji i pajisjes është i ndezur.
  • Check that the bulb is screwed in securely into the E27 socket.
  • Test the bulb in another working fixture to rule out a faulty fixture.
  • If the bulb still does not light up, it may be faulty and require replacement.
• Dridhje ose zbehje:
  • Confirm that the bulb is not connected to a dimmer switch, as this bulb is not dimmable.
  • Kontrolloni për lidhje të lirshme në pajisje ose instalime elektrike.
  • Siguroni vëllimintage supply is stable and within the bulb's specified range (220-240V).
• Zhurmë e pazakontë:
  • LED bulbs are generally silent. If you hear buzzing, ensure the bulb is not on a dimmer circuit.
  • Kontrolloni për lidhje të lirshme në pajisje.

7. Specifikimet

Figure 3: Technical drawing illustrating the dimensions of the OSRAM LED bulb. The 'd' indicates diameter and the vertical line indicates height.

Figure 4: EU Energy Label for the LEDVANCE AC32396 (OSRAM) LED bulb, indicating an energy efficiency class of E and consumption of 4 kWh/1000h. For more details, visit the official EPREL database: Lidhja e Bazës së të Dhënave EPREL.

8. Garancia dhe Mbështetja

Për informacion mbi garancinë dhe mbështetjen ndaj klientit, ju lutemi referojuni dokumentacionit të dhënë me blerjen tuaj ose vizitoni faqen zyrtare të OSRAM. webvend. Ruajeni provën e blerjes për kërkesat e garancisë.