Mesqool Projection Alarm Clock

Hyrje

Thank you for choosing the Mesqool Projection Alarm Clock. This device combines a digital alarm clock with a time projector, night light, and environmental sensors to enhance your daily routine. Please read this manual carefully to ensure proper setup and operation.

Një front view of the Mesqool Projection Alarm Clock, showcasing its large LED display with time, date, temperature, and humidity. The projection feature is also visible, casting the time onto a surface.

Karakteristikat kryesore

• Projeksioni i tavanit: Projects time onto your wall or ceiling with a 350° swivel projector and adjustable focus ring.
• Large Multi-function Display: 5.9'' LED screen shows 12/24 hour time, calendar date, day of the week, alarm times, indoor temperature, and humidity.
• Alarmet e dyfishta: Set two independent alarms with customizable modes (Mon-Sun, Mon-Fri, Sat-Sun, One-time) and a 9-minute snooze function.
• Volumi i rregullueshëm i alarmit: 7-level adjustable beep alarm for heavy sleepers.
• Drita e natës: Built-in soft LED night light at the bottom with two brightness settings.
• Zbehësi i ekranit: 5-level adjustable brightness for both the LED display and time projection.
• Portet e karikimit USB: Includes USB-A and USB-C ports for charging external devices.
• Rikthimi i baterisë: Retains time and alarm settings during power outages (requires 2x AAA batteries, not included).

An illustrative image detailing the primary functions of the alarm clock, including dual alarms, calendar, 12/24H time format, temperature, humidity, and night light.

Përmbajtja e paketës

• Mesqool Projection Alarm Clock Unit
• Përshtatës i energjisë
• Manuali i Përdoruesit
• Wireless Outdoor Sensor (for temperature and humidity readings, as shown in seller videos for similar products)

Konfigurimi

Fuqizimi i pajisjes

The alarm clock is primarily powered by the included AC adapter. For backup during power outages, install 2 AAA batteries (not included) into the battery compartment located on the bottom of the unit. The battery backup will maintain time and alarm settings but will not power the display or projection.

Vendosja fillestare e orës dhe datës

Upon first power-up or after a full power loss without battery backup, the clock may require manual time and date setting. Refer to the 'Operating Instructions' section for detailed steps on setting time, date, and 12/24H format.

The back of the alarm clock, revealing the battery compartment for backup power and the USB-A and USB-C ports for charging external devices.

Wireless Sensor Setup (if applicable)

If your model includes a wireless outdoor sensor, install batteries into the sensor unit and place it outdoors in a shaded, dry location. The clock will automatically connect to the sensor to display outdoor temperature and humidity.

Udhëzimet e funksionimit

Vendosja e orës dhe datës

1. Press and hold the 'SET TIME' button to enter time setting mode. The hour digits will flash.
2. Përdorni butonat '+' ose '-' për të rregulluar orën.
3. Press 'SET TIME' again to set minutes. Use '+' or '-' to adjust.
4. Continue pressing 'SET TIME' to cycle through setting year, month, and day, adjusting each with '+' or '-'.
5. Press 'SET TIME' one last time or wait 10 seconds for settings to save.
6. To switch between 12-hour and 24-hour format, press the '12/24H' button.
7. To activate/deactivate Daylight Saving Time (DST), press the 'DST' button.

Vendosja e alarmeve

1. Press and hold 'ALARM 1' or 'ALARM 2' button to set the respective alarm. The hour digits will flash.
2. Use '+' or '-' buttons to adjust the hour. Press the alarm button again to set minutes.
3. After setting minutes, press the alarm button again to select alarm mode (Mon-Sun, Mon-Fri, Sat-Sun, One-time).
4. Press the alarm button again to set the alarm volume (7 levels).
5. To activate/deactivate an alarm, short press 'ALARM 1' or 'ALARM 2'. An alarm icon will appear/disappear on the display.
6. When an alarm sounds, press 'SNOOZE/OK' for a 9-minute snooze. To turn off the alarm, press any other button.

This image illustrates the alarm clock's customizable features, including 7 adjustable volume levels for the alarm and 4 distinct alarm modes (Mon-Sun, Mon-Fri, Sat-Sun, One-time) to suit various schedules.

Projeksioni i kohës

1. Adjust the projector arm (located on the side) to direct the time onto your desired surface (wall or ceiling). The arm swivels 350°.
2. Rotate the focus ring on the projector lens to achieve a clear image.
3. To flip the projected image 180° (useful if the clock is placed in a way that projects upside down), press the 'PROJECTION ON/FLIP/OFF' button.
4. To turn the projection on/off, press and hold the 'PROJECTION ON/FLIP/OFF' button.

The alarm clock projecting clear blue digital time onto a wall, showcasing an alternative color option for the projection.

Display and Projection Brightness

The clock features a 5-level dimmer for both the main LED display and the projected time. Press the 'DIMMER' button repeatedly to cycle through the brightness levels (L1 to L5, with L5 being brightest).

A visual representation of the clock's 5-level adjustable dimmer, showing how the display brightness can be customized from bright to dim for optimal comfort, especially during nighttime.

Funksioni i dritës së natës

The soft LED night light is located at the bottom of the clock. Short press the 'SNOOZE/OK' button to cycle through its brightness settings (Off, Medium, Full).

The alarm clock featuring its built-in soft LED night light at the bottom, offering adjustable brightness settings (Off, Medium, Full) to create a comfortable ambiance.

Portat e karikimit USB

The back of the clock includes a USB-A and a USB-C port. These ports can be used to charge your smartphone, tablet, or other USB-powered devices. Ensure the clock is connected to AC power for charging functionality.

Ekrani i temperaturës dhe lagështisë

The clock displays both indoor temperature and humidity. If a wireless outdoor sensor is connected, it will also show outdoor temperature and humidity readings.

Mirëmbajtja

To maintain your Mesqool Projection Alarm Clock, wipe the unit with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the surface. Keep the device away from direct sunlight, extreme temperatures, and moisture.

Zgjidhja e problemeve

Specifikimet

Garancia dhe Mbështetja

Mesqool products are designed for reliability and performance. For any questions, technical support, or warranty claims, please contact our customer service team. We are committed to providing excellent support for your product.

Email i shërbimit të klientit: support-us@mesqool.com