REPTITRIP Reptile Reptile Ngrohëse me Termostat PID (Modeli 8X12"-24W) Manuali i Udhëzimeve

Hyrje

This manual provides instructions for the safe and effective use of your REPTITRIP Reptile Heating Pad with PID Thermostat. This device is designed to provide a controlled heat source for reptile terrariums, helping to maintain a stable and appropriate temperature for your pets. Please read all instructions carefully before installation and operation.

Informacion i rëndësishëm për sigurinë

Mosndjekja e këtyre udhëzimeve të sigurisë mund të rezultojë në zjarr, goditje elektrike, lëndim ose dëmtim të produktit ose pronës.

• This product is intended for household use only, specifically for heating reptile terrariums.
• Do not immerse the heating pad or thermostat controller in water. The heating pad is waterproof (IP67 rated) but not designed for submersion.
• Do not use the heating pad if it is folded or creased. Ensure it lies flat.
• Do not use the heating pad directly on a metal tank, as this can lead to inefficient heating or damage.
• Prolonged application at high temperature settings can cause skin burns to animals. Always monitor the temperature carefully.
• Discontinue use immediately if the heating pad shows any signs of deterioration, such as cracking, blistering, or melting.
• The heating pad features a built-in temperature sensor that will stop heating if the internal temperature reaches 122°F (50°C) to prevent overheating.
• Keep out of reach of children and pets not intended for its use.

Produkti Mbiview

The REPTITRIP Reptile Heating Pad system includes a heating mat and an intelligent PID thermostat controller. It is designed to provide precise and stable temperature control for reptile habitats.

Karakteristikat kryesore:

• PID Intelligent Thermostat: Accurately controls heating temperature for efficiency and stability.
• Ngrohje e shpejtë: 24W power heats to 113°F (45°C) in approximately 1 minute.
• Mbrojtja e temperaturës së lartë: Automatically stops heating at 122°F (50°C).
• Zbulimi i temperaturës: Built-in sensor and external probe for real-time temperature monitoring.
• Ndërtim i qëndrueshëm: 5-layer design including PVC material, lagging, and heating layer.
• Dizajni i papërshkueshëm nga uji: IP67 rated heating pad (do not immerse).
• Mbështetje ngjitëse: Equipped with 3M adhesive for secure mounting.

Udhëzimet e konfigurimit

1. Zgjidhni vendndodhjen: Select a suitable location for the heating pad, typically on the bottom or side of a glass terrarium. Ensure the surface is clean and dry.
2. Apply Heating Pad: Remove the protective film from the 3M adhesive backing on the heating pad. Carefully press the pad firmly onto the chosen surface of the terrarium. Ensure there are no air bubbles or wrinkles.
3. Position Temperature Probe: Place the external temperature probe inside the terrarium, near the area where the heat is needed most, but away from direct contact with the heating pad to ensure accurate ambient temperature readings. Secure it to prevent movement.
4. Lidhja e termostatit: Plug the heating pad into the thermostat controller. Then, plug the thermostat controller into a standard electrical outlet.

Udhëzimet e funksionimit

The PID thermostat controller allows for precise temperature management. The controllable temperature range is 68°F to 113°F (20°C to 45°C).

Funksionet e kontrolluesit:

• Ekrani LCD: Shows current time, sensor temperature, set temperature, and power percentage.
• Butoni ON/OFF: Press and hold to power the unit on or off.
• Butoni SET: Press to enter temperature setting mode.
• Butoni '+': Increases the set temperature or navigates menu options.
• Butoni '-': Decreases the set temperature or navigates menu options.
• Butoni OK: Konfirmon zgjedhjet.

Vendosja e temperaturës:

1. Shtypni SET button. The set temperature display will begin to flash.
2. Përdorni + or - butonat për të rregulluar temperaturën e dëshiruar.
3. Shtypni OK button to confirm your setting. The display will stop flashing.

Switching Between °F and °C:

To switch the temperature display between Fahrenheit (°F) and Celsius (°C), long press the SET butonin dhe + butonin në të njëjtën kohë.

Mirëmbajtja

• Pastrimi: Disconnect the power before cleaning. Wipe the heating pad and controller with a damp pëlhurë. Mos përdorni pastrues gërryes ose mos i zhytni në ujë.
• Inspektimi: Regularly inspect the heating pad and power cords for any signs of damage, wear, or deterioration. If any damage is observed, discontinue use and replace the unit.
• Magazinimi: When not in use, store the heating pad and controller in a dry, cool place, away from direct sunlight and extreme temperatures.

Zgjidhja e problemeve

• No Power/Heating:
  • Sigurohuni që kablloja e energjisë të jetë e lidhur mirë në një prizë elektrike funksionale.
  • Check if the thermostat controller is powered on (press and hold the ON/OFF button).
  • Verify that the heating pad is correctly plugged into the thermostat controller.
• Lexim i pasaktë i temperaturës:
  • Ensure the external temperature probe is properly positioned within the terrarium and not directly touching the heating pad or other heat sources.
  • Check for any obstructions around the probe that might affect its reading.
• Luhatjet e temperaturës:
  • The PID system is designed for stable control, but significant external temperature changes or drafts can affect stability.
  • Ensure the terrarium is adequately insulated and placed in a stable environment.
• Heating Pad Overheating (reaching 122°F/50°C):
  • The built-in protection will temporarily stop heating. This is a safety feature.
  • Check if the set temperature is too high for the environment or if the pad is covered by insulating material that traps excessive heat.

Specifikimet

Garancia dhe Mbështetja e Klientit

For warranty information, technical assistance, or customer support, please refer to the contact information provided with your purchase or visit the official REPTITRIP webfaqe interneti. Ruajeni faturën e blerjes si provë të blerjes.