Sunco Lighting 4ft LED Shop Light Instruction Manual

1. Informacion i rëndësishëm për sigurinë

Please read and understand all instructions before installing or operating this fixture. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause personal injury or property damage.

• PARALAJMËRIM: Rrezik goditjeje elektrike. Shkëputni energjinë elektrike te siguresa ose çelësi i qarkut para instalimit ose shërbimit.
• PARALAJMËRIM: Risk of fire. Keep combustible materials away from the lamp.
• This fixture is intended for indoor use only. Do not use in wet locations or where directly exposed to water.
• Siguroni furnizimin voltage is compatible with the fixture's requirements (120V-277V).
• Të gjitha lidhjet e instalimeve elektrike duhet të bëhen në përputhje me kodet lokale dhe kombëtare elektrike. Nëse nuk jeni të sigurt për instalimet elektrike, konsultohuni me një elektricist të kualifikuar.
• Mos u përpiqni ta modifikoni ose çmontoni pajisjen. Brenda saj nuk ka pjesë që mund të riparohen nga përdoruesi.

2. Çfarë ka në kuti

Sigurohuni që të gjithë përbërësit janë të pranishëm para se të filloni instalimin:

• LED Shop Light Fixture(s)
• Pajisjet e montimit (vida, spirancat)
• Linking Cables (1.5" and 8" for daisy-chaining)
• Arra teli

3. Specifikimet

The fixture features a durable build with an impact-resistant prismatic lens for wide and consistent light dispersion.

This image illustrates key features including impact resistance, the prismatic lens design, non-dimmable functionality, and the wide voltage compatibility of 120-277V.

4. Konfigurimi dhe instalimi

Follow these steps for proper installation. Ensure power is disconnected before starting.

4.1. Përgatituni për Instalim

1. Fikni energjinë: Locate the circuit breaker controlling the installation area and turn off the power.
2. Remove Diffuser: Gently remove the prismatic diffuser from the lamp base to access the internal components.
3. Zgjidhni Temperaturën e Ngjyrës (CCT): Before mounting, locate the CCT switch inside the fixture. Select your desired color temperature (4000K, 5000K, or 6000K). This setting cannot be changed easily after installation.

This image shows the internal CCT switch, allowing selection between 4000K, 5000K, and 6000K before installation.

4.2. Montimi i fiksimit

The fixture is designed for flush mounting to a ceiling or surface. It includes keyhole slots for easy installation.

1. Shënoni pikat e montimit: Hold the fixture in the desired mounting location and mark the positions for the mounting screws. Ensure these align with a junction box or suitable support structure.
2. Instaloni pajisjen e montimit: Drill pilot holes if necessary and install the provided mounting screws, leaving a small gap for the fixture to slide onto.
3. Përgatitja e instalimeve elektrike: If connecting to a junction box, knock out the appropriate punch hole on the fixture's housing.

This diagram illustrates the three main steps for installation: securing the housing, connecting electrical wires, and attaching the light fixture.

4.3. Lidhje elektrike

1. Lidhni telat: Using the provided wire nuts, connect the fixture's wires to the supply wires: Live (black) to Live, Neutral (white) to Neutral, and Ground (yellow/green) to Ground. Ensure all connections are secure.
2. Telat e Mbështjelljes: Carefully tuck all wires and wire nuts into the junction box or fixture housing.

4.4. Linking Multiple Fixtures (Daisy Chain)

This fixture supports daisy-chaining to extend lighting coverage. Use the provided linking cables.

1. Connect Linking Cable: Insert one end of a linking cable into the designated port on the first fixture and the other end into the port on the next fixture.
2. Lidhje të sigurta: Ensure linking cables are securely connected and properly routed.

This image demonstrates how to daisy-chain multiple fixtures using the linking cables and highlights the knockout punch hole for electrical connections.

4.5. Hapat përfundimtarë

1. Reattach Diffuser: Align one end of the diffuser with the aluminum base and push it into place until it snaps securely.
2. Rivendosni energjinë: Turn the circuit breaker back on to restore power to the fixture.

5. Udhëzimet e funksionimit

The Sunco Lighting LED Shop Light is designed for straightforward operation once installed.

5.1. Color Temperature Selection (CCT)

This fixture features a selectable color temperature (CCT) switch, allowing you to choose between 4000K (Cool White), 5000K (Daylight), and 6000K (Bright White) to suit your preference or application. The CCT switch is located inside the fixture and must be set during installation before the diffuser is reattached.

• 4000 mijë: Provides a neutral white light, suitable for offices or general workspaces.
• 5000 mijë: Offers a bright, crisp daylight-like illumination, ideal for tasks requiring high visibility.
• 6000 mijë: Delivers a very bright, cool white light, often preferred for industrial settings or areas needing maximum brightness.

This image displays the internal components and wiring, emphasizing the high efficiency of the LED fixture operating within a 120-277V range.

5.2. Ndez/Fik

The fixture is non-dimmable and operates via a standard wall switch connected to its power supply. Simply toggle the wall switch to turn the light on or off.

6. Mirëmbajtja

The Sunco Lighting LED Shop Light requires minimal maintenance. Always ensure power is disconnected before performing any maintenance.

• Pastrimi: Fshijeni pjesën e jashtme të pajisjes me një sfungjer të butë, të thatë ose pak të lagur.amp cloth. Do not use harsh chemicals or abrasive cleaners, as these can damage the finish or lens.
• Inspektimi: Inspektoni periodikisht pajisjen për çdo shenjë dëmtimi, instalime elektrike të lirshme ose konsumim. Nëse gjeni ndonjë problem, shkëputni energjinë elektrike dhe konsultohuni me një elektricist të kualifikuar.
• Pa zëvendësim llambë: This fixture uses integrated LEDs, meaning there are no bulbs to replace. The LEDs are designed for a long lifespan of 50,000 hours.

7. Troubleshooting

If you experience issues with your LED Shop Light, refer to the following common troubleshooting steps:

• Drita nuk ndizet:
  • Kontrolloni ndërprerësin për t'u siguruar që energjia është e ndezur.
  • Verify all wire connections are secure and correct.
  • Sigurohuni që çelësi i murit të jetë në pozicionin ON.
• Drita dridhet:
  • Confirm the fixture is not connected to a dimmer switch, as it is non-dimmable.
  • Kontrolloni për lidhjet e lirshme të instalimeve elektrike.
  • Siguroni furnizimin voltage is stable and within the specified range.
• Temperatura e gabuar e ngjyrës:
  • The CCT switch must be set before installation. If the diffuser is already installed, carefully remove it to access and adjust the switch.

If these steps do not resolve the issue, contact Sunco Lighting customer support for assistance.

8. Garancia dhe Mbështetja

Sunco Lighting stands behind the quality of its products.

• Garancia: This product is backed by a 3-Year Warranty. Please refer to the official Sunco Lighting webfaqen e internetit ose dokumentacionin e blerjes për detaje dhe kushte të plota të garancisë.
• Mbështetja e klientit: For technical assistance, troubleshooting, or warranty claims, please contact Sunco Lighting customer support.