Produkti Mbiview
The WALI GSMU001XL is a heavy-duty single monitor gas spring desk mount designed to support ultrawide or curved LCD/LED screens ranging from 17 inches to 49 inches. It can hold monitors weighing up to 44 lbs and is compatible with VESA mounting patterns of 75x75mm and 100x100mm. This mount offers full adjustability for optimal viewing angles and includes integrated USB Type-C and USB Type-A 3.0 ports for convenient connectivity.
The mount features a two-stage locking system, supporting both C-clamp and Grommet Base installations on desks with a thickness between 0.47 inches and 1.97 inches.
Përmbajtja e paketës
Before beginning installation, please ensure all components are present and undamaged. If any parts are missing or damaged, contact WALI customer support.
- 1 x WALI Ultrawide Monitor Desk Mount (GSMU001XL)
- Mounting Hardware Kit (screws, washers, spacers, Allen wrenches)
- Manuali i Përdoruesit
Konfigurimi dhe instalimi
Follow these steps carefully to install your WALI GSMU001XL monitor mount. Two installation methods are available: C-clamp and Grommet Base.
Hapi 1: Zgjidhni metodën e montimit
Përcaktoni nëse do të përdorni C-clamp or Grommet Base. Both methods are compatible with desk thicknesses from 0.47 inches to 1.97 inches.
Step 2: Assemble the Base and Arm
Assemble the base according to your chosen mounting method (C-clamp or Grommet Base). Attach the lower arm section to the base.
Hapi 3: Bashkangjitni pllakën VESA në monitor
Attach the VESA plate to the back of your monitor using the appropriate screws from the hardware kit. Ensure the screws are tightened securely but do not overtighten.
Hapi 4: Montoni monitorin në krah
Carefully slide the monitor (with the attached VESA plate) onto the upper arm section. Ensure it locks into place. It is recommended to have assistance when mounting heavier monitors.
Step 5: Connect USB Cables
Connect the integrated USB Type-C and USB Type-A 3.0 ports on the mount to your computer using the provided cables. Route cables through the arm's cable management channels for a tidy setup.
Operating the Monitor Arm
The WALI GSMU001XL monitor arm offers extensive adjustability to achieve an ergonomic viewpozicioni ing.
Rregullimi i pozicionit të monitorit
The arm allows for the following movements:
- anim: Adjust the monitor angle from +50° to -20°.
- Rrotullues: Rotate the monitor horizontally up to +90°/-90°.
- Rrotullimi: Rotate the monitor 360° to switch between landscape and portrait modes.
- Rregullimi i lartësisë: The gas spring arm allows for a height range of 9.09 inches to 19.69 inches.
- Shtrirja: Krahu mund të shtrihet deri në 21.93 inç.
Rregullimi i tensionit të gazit
The gas spring tension must be adjusted to match your monitor's weight for proper balance and movement. Use the provided Allen wrench to adjust the tension screw located on the arm.
- To adjust for lighter monitors or if the monitor floats up: Turn the tension screw në drejtim të akrepave të orës.
- To adjust for heavier monitors or if the monitor sags down: Turn the tension screw në drejtim të akrepave të orës.
Adjust gradually until the monitor stays in position when released.
Mirëmbajtja
To ensure the longevity and proper function of your WALI monitor arm, follow these simple maintenance guidelines:
- Pastrimi: Fshijeni krahun dhe bazën me një peshqir të butë.amp leckë. Shmangni pastruesit ose tretësit gërryes që mund të dëmtojnë sipërfaqen.
- Kontrollet periodike: Kontrolloni periodikisht të gjitha vidat dhe lidhjet për t'u siguruar që ato mbeten të shtrënguara. Shtrëngojini përsëri nëse është e nevojshme.
- Sustë gazi: The gas spring is designed for long-term use and typically requires no maintenance. If you notice changes in its performance, refer to the troubleshooting section.
Zgjidhja e problemeve
Nëse hasni probleme me krahun e monitorit, referojuni problemeve dhe zgjidhjeve të zakonshme të mëposhtme:
Problem: Monitor Sags or Drops
Zgjidhja: The gas spring tension is likely too low for your monitor's weight. Turn the tension screw në drejtim të akrepave të orës to increase tension until the monitor holds its position.
Problem: Monitor Floats Up or is Difficult to Push Down
Zgjidhja: The gas spring tension is likely too high for your monitor's weight. Turn the tension screw në drejtim të akrepave të orës to decrease tension until the monitor holds its position.
Problem: Monitor is Unstable or Wobbles
Zgjidhja:
- Ensure all mounting screws (desk clamp/grommet, VESA plate, arm connections) are securely tightened.
- Verify that your desk is stable and can support the weight of the mount and monitor.
Problem: USB Ports Not Functioning
Zgjidhja:
- Ensure the USB cables from the monitor arm are properly connected to your computer's USB ports.
- Test with different USB devices or computer ports to rule out device or port issues.
If problems persist after attempting these solutions, please contact WALI customer support.
Specifikimet
| Veçori | Specifikimi |
|---|---|
| Numri i modelit | GSMU001XL |
| Markë | WALI |
| Përputhshmëria e Madhësisë së Monitorit | 17" to 49" Ultrawide/Curved |
| Kapaciteti i peshës | Deri në 44 lbs (20 kg) |
| Përputhshmëria VESA | 75x75mm, 100x100mm |
| Pajtueshmëria e Trashësisë së Tavolinës | 0.47" - 1.97" (1.2 cm - 5 cm) |
| Lloji i montimit | C-clamp, Grommet Base |
| Këndi i animit | +50° / -20° |
| Këndi rrotullues | +90° / -90° |
| Rrotullimi | 360° (Peizazh në Portret) |
| Gama e lartësisë | 9.09" - 19.69" (23.1 cm - 50 cm) |
| Zgjatja maksimale e krahut | 21.93" (55.7 cm) |
| Integrated Ports | 1 x USB Type-C, 1 x USB Type-A 3.0 |
| Materiali | Alumini |
| Ngjyra | E zezë |
Video e produktit
Garancia dhe Mbështetja
For warranty information or technical assistance, please contact WALI customer support. WALI provides experienced and friendly US-based customer support available to assist 7 days a week.
Refer to the product packaging or the official WALI webfaqe interneti për detajet më të fundit të kontaktit dhe kushtet e garancisë.
