johgee HCT-379 4-Output Digital Irrigation Computer User Manual

1. Hyrje

This manual provides detailed instructions for the installation, programming, and operation of your johgee HCT-379 4-Output Digital Irrigation Computer. This device is designed to automate watering for various applications, including gardens, lawns, and greenhouses, offering flexible and independent control over four separate watering zones.

Image: The johgee HCT-379 irrigation computer highlighting its key features.

2. Informacion mbi sigurinë

• Ensure the device is installed securely to prevent accidental detachment.
• Do not submerge the device in water. While it is IPX5 waterproof, prolonged submersion can cause damage.
• Përdorni vetëm bateri alkaline AA 1.5V. Mos përzieni bateri të vjetra me të reja ose lloje të ndryshme baterish.
• Keep the device out of reach of children and pets to prevent unintended operation.
• Disconnect the device from the faucet and store it indoors during freezing temperatures to prevent damage.

3. Përmbajtja e paketës

Verifikoni që të gjitha sendet janë të pranishme në paketim:

• johgee HCT-379 4-Output Digital Irrigation Computer
• Manuali i Përdoruesit
• Standard faucet connector (typically 3/4 inch)
• Additional adapters/seals (if included)

4. Produkti i Mbaruarview

The johgee HCT-379 features a large LCD display and intuitive controls for easy programming. It includes four independently controlled outlets for versatile watering.

Imazhi: Përpara view of the irrigation computer with display labels.

Komponentët kryesorë:

• Ekrani LCD: Shows current time, program settings, and status.
• Butonat e kontrollit: For navigation, setting values, and mode selection (NOW, ABCD, ESC/OFF, OK, +, -, DELAY).
• Faucet Connector: Top inlet for connecting to a standard outdoor faucet.
• Four Independent Outlets (A, B, C, D): Bottom outlets for connecting hoses to different watering zones.
• Ndarja e baterisë: Located at the back, secured with a sealed cover.

5. Konfigurimi

5.1. Instalimi i baterisë

1. Gjeni ndarjen e baterisë në pjesën e pasme të pajisjes.
2. Open the sealed battery cover.
3. Vendosni dy (2) bateri të reja alkaline AA 1.5V, duke u siguruar që të keni polaritet të saktë (+/-).
4. Securely close the battery cover to maintain the IPX5 waterproof rating.

Image: Steps for battery insertion and device installation.

5.2. Connecting to the Faucet

1. Sigurohuni që rubineti juaj i jashtëm të jetë i fikur.
2. Thread the top connector of the irrigation computer onto your faucet. Hand-tighten until secure. Do not overtighten.
3. Turn on your faucet fully to ensure adequate water pressure to the timer.

5.3. Connecting Hoses to Outlets

1. Attach your garden hoses or irrigation lines to the four independent outlets (A, B, C, D) at the bottom of the device.
2. Sigurohuni që të gjitha lidhjet të jenë të ngushta për të parandaluar rrjedhjet.

6. Udhëzimet e funksionimit

6.1. Kuptimi i Ekranit

The LCD display provides all necessary information for programming and monitoring. Familiarize yourself with the indicators:

• TANI: Koha aktuale.
• ABCD: Indicates which output zone(s) are currently selected or being programmed.
• KOHA E NISJES: The programmed time for watering to begin.
• SA GJATË: The duration of watering for a selected zone (1 second to 360 minutes).
• SA SHPESH: The frequency of watering (1 hour to 23 hours, or 1 day to 15 days).
• NEXT START: Time remaining until the next scheduled watering cycle.
• Treguesi i baterisë: Tregon jetëgjatësinë e mbetur të baterisë.
• Ikona e kyçjes për fëmijë: Indicates if the child lock is active.
• Rain Delay Icon: Indicates if rain delay is active.

6.2. Vendosja e kohës aktuale

1. Shtypni TANI button. The current time will flash.
2. Përdorni + dhe - butonat për të rregulluar orën.
3. Shtypni OK për të konfirmuar orën dhe për të kaluar te minutat.
4. Përdorni + dhe - butonat për të rregulluar minutat.
5. Shtypni OK për të kursyer kohën aktuale.

6.3. Programming Watering Schedules (Zones A, B, C, D)

Each of the four outlets can be programmed independently.

1. Shtypni ABCD button to select the zone you wish to program (A, B, C, or D). The selected zone will flash.
2. Shtypni OK to enter programming mode for that zone.
3. Cakto orën e fillimit: The 'START TIME' will flash. Use + dhe - për të rregulluar orën, pastaj OK to confirm and move to minutes. Adjust minutes and press OK.
4. Cakto Kohëzgjatjen e Lotimit ('SA KOHË'): The 'HOW LONG' value will flash. Use + dhe - to set the watering duration from 1 second to 360 minutes. Press OK.
5. Cakto Frekuencën e Lotimit ('SA SHPESH'): The 'HOW OFTEN' value will flash. Use + dhe - to set the frequency from 1 hour to 23 hours, or 1 day to 15 days. Press OK to save the program for the selected zone.
6. Repeat steps 1-5 for each zone (A, B, C, D) you wish to program.

Image: Programming options for watering duration and frequency across multiple zones.

6.4. Manual Watering Mode

This mode allows immediate watering without affecting your programmed schedules.

1. Shtypni water faucet icon button (usually labeled with a faucet symbol).
2. Përdorni ABCD button to select the desired output zone(s) for manual watering.
3. Përdorni + dhe - buttons to set the manual watering duration.
4. Shtypni OK to start manual watering. The selected zone(s) will begin watering for the set duration.
5. To stop manual watering prematurely, press the water faucet icon button përsëri ose ESC/OFF.

Image: Activating manual watering mode.

6.5. Modaliteti i vonesës së shiut

The device does not have an automatic rain sensor. Rain delay must be activated manually to pause scheduled watering during rainfall.

1. Shtypni dhe mbani shtypur VONESA butonin për 3 sekonda.
2. Përdorni + dhe - buttons to select the desired delay duration (e.g., 24 hours, 48 hours, 72 hours).
3. Shtypni OK to confirm. The rain delay icon will appear on the display, and all programmed watering cycles will be paused for the selected duration.
4. To cancel rain delay, press and hold the VONESA button again for 3 seconds, then set the delay to '0' or press ESC/OFF.

Image: Rain delay mode activated on the irrigation computer.

6.6. Funksioni i bllokimit të fëmijëve

To prevent accidental changes to your settings, activate the child lock.

1. Shtypni dhe mbani shtypur lock icon button for 3 seconds. The lock icon will appear on the display.
2. Për ta zhbllokuar, shtypni dhe mbani shtypur lock icon button again for 3 seconds. The lock icon will disappear.

6.7. Manual Valve Operation (Video Demonstration)

This video demonstrates how to manually open and close the valves on the irrigation computer.

Video: Demonstration of manually opening and closing the valves on the johgee HCT-379 irrigation computer. This shows how to test water flow through each output.

7. Mirëmbajtja

7.1. Pastrimi

• Fshijeni pjesën e jashtme të pajisjes me një të butë, damp pëlhurë. Mos përdorni pastrues gërryes ose tretës.
• Periodically check the filter screen in the faucet connector for debris and clean if necessary to maintain optimal water flow.

7.2. Magazinimi i dimrit

• Before the first frost, disconnect the irrigation computer from the faucet and hoses.
• Remove the batteries to prevent corrosion.
• Store the device in a dry, frost-free location indoors.

8. Troubleshooting

9. Specifikimet

• Modeli: HCT-379
• Marka: johgee
• Numri i Produktesh: 4 (independently controlled)
• Kohëzgjatja e ujitjes: 1 sekondë deri në 360 minuta
• Frekuenca e ujitjes: 1 orë deri në 15 ditë
• Burimi i energjisë: 2 bateri alkaline AA 1.5V (nuk përfshihen)
• Vlerësimi i papërshkueshëm nga uji: IPX5
• Materiali: Reinforced Nylon Fiber
• Dimensionet e produktit: 14.2 x 16.4 x 7.4 cm
• Pesha: 890 gram

10. Garancia dhe Mbështetja

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official johgee webfaqe interneti. Ruajeni faturën e blerjes si provë të blerjes.