Addiesdive AD2063 GMT Quartz Watch User Manual

Hyrje

Thank you for choosing the Addiesdive AD2063 GMT Quartz Watch. This manual provides detailed instructions for the proper setup, operation, and maintenance of your timepiece. Please read this manual carefully to ensure optimal performance and longevity of your watch.

Image: The Addiesdive AD2063 GMT Quartz Watch, showcasing its beige dial, stainless steel case, and bracelet.

Udhëzimet e konfigurimit

Before using your watch, it is important to set the time, date, and GMT function correctly.

1. Crown Positions

The crown on your Addiesdive AD2063 watch has three positions:

• Position 0 (Pushed In): Normal operating position, screw-down for water resistance.
• Position 1 (First Click Out): Used for setting the date and GMT hand.
• Position 2 (Second Click Out): Used for setting the main time (hour and minute hands).

Imazh: Një pamje nga afër view of the watch crown, which is used for adjustments.

2. Caktimi i kohës

1. Unscrew the crown counter-clockwise until it springs out to Position 0.
2. Gently pull the crown out to Pozicioni 2 (second click). The second hand will stop.
3. Rotate the crown clockwise or counter-clockwise to set the desired time. Ensure the 24-hour GMT hand is also correctly aligned with the main time if you are setting the primary time zone.
4. Once the time is set, push the crown back into Pozicioni 0 and screw it clockwise firmly to ensure water resistance.

3. Caktimi i datës

1. Unscrew the crown counter-clockwise until it springs out to Position 0.
2. Gently pull the crown out to Pozicioni 1 (klikimi i parë).
3. Rotate the crown counter-clockwise to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement. If the current time falls within this period, first set the time outside this range, adjust the date, then reset the time.
4. Once the date is set, push the crown back into Pozicioni 0 and screw it clockwise firmly to ensure water resistance.

4. Setting the GMT (Second Time Zone) Hand

The GMT hand operates on a 24-hour scale. To set it:

1. Unscrew the crown counter-clockwise until it springs out to Position 0.
2. Gently pull the crown out to Pozicioni 1 (klikimi i parë).
3. Rotate the crown clockwise to adjust the GMT hand. This hand moves independently of the main hour and minute hands in this position.
4. Once the GMT hand is set to your desired second time zone (on a 24-hour scale), push the crown back into Pozicioni 0 and screw it clockwise firmly to ensure water resistance.

Image: The watch dial highlighting the GMT hand, which indicates a second time zone on a 24-hour scale.

5. Rregullimi i byzylykut

The stainless steel bracelet can be adjusted by removing or adding links. It is recommended to have this procedure performed by a qualified watchmaker to avoid damaging the bracelet or watch.

Image: The watch's stainless steel bracelet and clasp mechanism.

Funksionimi i orës suaj

Rezistenca ndaj ujit

Your Addiesdive AD2063 watch is rated for 200 meters (20 ATM) water resistance. This makes it suitable for professional marine activity and serious surface water sports, but not for saturation diving. Always ensure the crown is fully screwed down before exposing the watch to water.

• 200M / 20 ATM: I përshtatshëm për not, snorkeling dhe zhytje rekreative.
• Mos e përdorni kurorën ose butonat kur ora është e lagur ose e zhytur në ujë.
• Avoid exposing the watch to extreme temperature changes, which can affect water resistance seals.

Mirëmbajtja

Proper maintenance will help preserve the appearance and function of your watch.

Pastrimi

Fshijeni mbulesën dhe byzylykun e orës rregullisht me një leckë të butë dhe të thatë. Për çelik inox, një leckë pak e thatëamp Mund të përdoret një leckë, e më pas një leckë e thatë. Shmangni përdorimin e pastruesve kimikë ose materialeve gërryese.

Ndërrimi i baterisë

As a quartz watch, your AD2063 is powered by a battery. When the battery runs low, the second hand may start skipping seconds (End-of-Life indicator). It is recommended to have the battery replaced by a professional watchmaker to ensure the watch's water resistance is maintained.

Kontrollet e rezistencës ndaj ujit

To maintain the stated water resistance, it is advisable to have the watch's seals checked and replaced by a professional watchmaker every 2-3 years, or after any impact to the watch.

Zgjidhja e problemeve

Specifikimet

• Modeli: 2063 pas Krishtit
• Lëvizja: 515-24H Quartz GMT
• Materiali i rastit: 316L Solid Stainless Steel
• Surface Mirror: Sapphire glass with clear AR-Coating
• Diametri i kasës: 38 mm (without crown)
• Case Length (Lug to Lug): 46.7 mm
• Trashësia e kasës: 12.5 mm
• Gjerësia e gomës: 20 mm
• Gjatësia e bandës: 22 cm / 8.66 inç
• Rezistenca ndaj ujit: 200 m / 20 ATM
• Lloji i kurorës: Kurorë me vidë
• Materiali i rripit: Çelik inox
• Pesha: Rreth 134 g

Image: Technical diagram illustrating the dimensions and key specifications of the watch.

Informacioni i Garancisë

Your Addiesdive AD2063 watch is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms and conditions. The warranty typically does not cover normal wear and tear, accidental damage, or damage resulting from improper use or unauthorized repairs.

Mbështetja e klientit

For any questions, technical assistance, or service requests regarding your Addiesdive AD2063 watch, please contact the retailer or the manufacturer's customer service. Keep your purchase receipt and warranty card handy when contacting support.

You can visit the 1963 Watch Store on Amazon for more information: 1963 Watch Store