ECOELER 6-Inch Motion Sensor LED Ceiling Light

1. Hyrje

Thank you for choosing the ECOELER 6-Inch Motion Sensor LED Ceiling Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

Imazhi 1.1: Përpara view of the ECOELER 6-Inch Motion Sensor LED Ceiling Light.

2. Informacion mbi sigurinë

Për të zvogëluar rrezikun e zjarrit, goditjes elektrike ose lëndimit personal, ndiqni gjithmonë këto masa paraprake themelore sigurie:

• PARALAJMËRIM: Rrezik goditjeje elektrike. Shkëputni energjinë nga siguresa ose ndërprerësi para instalimit ose servisit.
• Ky produkt duhet të instalohet në përputhje me kodin e instalimit në fuqi nga një person i njohur me ndërtimin dhe funksionimin e produktit dhe rreziqet e përfshira.
• Use only 120V AC, 60Hz circuits.
• Mos u përpiqni ta çmontoni ose modifikoni pajisjen. Brenda saj nuk ka pjesë që mund të riparohen nga përdoruesi.
• Sigurohuni që të gjitha lidhjet të jenë të sigurta dhe të izoluara siç duhet.
• Kjo pajisje është e përshtatshme vetëm për përdorim të brendshëm.

3. Përmbajtja e paketës

Sigurohuni që të gjithë përbërësit janë të pranishëm para se të filloni instalimin:

• 6-Inch Black Motion Sensor LED Ceiling Light (x1)
• Pajisjet e montimit (vida, arra teli)
• E26 Adapter Accessories (for recessed can installation)
• Manual udhëzimi (ky dokument)

Image 3.1: Included accessories for installation.

4. Karakteristikat e produkteve

• 3CCT Selectable: Choose between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) color temperatures.
• Sensori i lëvizjes: Passive Infrared (PIR) sensor detects motion within 9-16 feet.
• Vonimi i rregullueshëm i kohës: Set the light to remain on for 30 seconds, 1 minute, or 5 minutes after motion ceases.
• Sensori i dritës: The motion sensor functions only in dark environments, remaining off during daylight hours.
• Efikasiteti i Energjisë: 16W LED provides 1000 lumens of brightness.
• Instalim i gjithanshëm: Compatible with 3.5 or 4-inch junction boxes and 5 or 6-inch recessed cans.

Image 4.1: Key features including PIR sensor, 3CCT, and time delay settings.

5. Konfigurimi dhe instalimi

Before installation, ensure the power supply is turned off at the circuit breaker.

5.1. Junction Box Installation

1. Hiqeni lentet duke e rrotulluar në drejtim të akrepave të orës.
2. Connect the supply wires to the fixture wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green (ground).
3. Attach the fixture base to the junction box using the provided screws.
4. Twist the lens counter-clockwise to secure it back onto the fixture.

5.2. Recessed Can Installation

1. Hiqeni lentet duke e rrotulluar në drejtim të akrepave të orës.
2. Install the spring clips onto the fixture base using screws.
3. Connect the E26 adapter to the existing socket in the recessed can.
4. Connect the fixture wires to the E26 adapter wires using wire nuts.
5. Push the disk light into the recessed can until the spring clips secure it.
6. Twist the lens counter-clockwise to secure it back onto the fixture.

Image 5.1: Installation diagrams for junction box and recessed can.

6. Udhëzimet e funksionimit

After successful installation and restoring power, the light will be ready for operation. The ECOELER motion sensor light operates automatically based on ambient light and motion detection.

6.1. Funksionaliteti i sensorit të lëvizjes

• Gjatë ditës: The light remains off even if motion is detected, due to the integrated light sensor.
• Nighttime/Dark Environments: The light will automatically turn on when motion is sensed within its detection range (approximately 9-16 feet).
• The light will turn off after the set time delay if no further motion is detected.

Image 6.1: Motion sensor operation during day and night.

6.2. Color Temperature (CCT) Adjustment

The fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). To adjust the CCT:

1. Sigurohuni që energjia të jetë e fikur.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the CCT selector switch on the LED board (refer to Image 4.1).
4. Slide the switch to your desired color temperature setting (3000K, 4000K, or 5000K).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.2: Visual representation of 3CCT options.

6.3. Time Delay Adjustment

The light can be set to remain on for 30 seconds, 1 minute, or 5 minutes after motion is no longer detected. To adjust the time delay:

1. Sigurohuni që energjia të jetë e fikur.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the time delay selector switch on the fixture (refer to Image 4.1).
4. Slide the switch to your desired time setting (30s, 1min, or 5mins).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.3: Time delay countdown feature.

7. Mirëmbajtja

The ECOELER LED ceiling light requires minimal maintenance.

• Pastrimi: Sigurohuni që të jetë i fikur para pastrimit. Fshijeni pajisjen me një leckë të butë, të thatë ose pak të thatë.amp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electronic components.
• Lente: Keep the lens clean to ensure optimal light output and motion sensor performance.

8. Troubleshooting

If you experience issues with your ECOELER LED ceiling light, refer to the following common problems and solutions:

9. Specifikimet

10. Garancia dhe Mbështetja

This ECOELER product is backed by a Limited Warranty. For specific warranty details and duration, please refer to the documentation included with your purchase or contact ECOELER customer support.

For technical assistance, troubleshooting, or warranty claims, please contact ECOELER customer support through the retailer where the product was purchased or visit the official ECOELER webfaqe.

Prodhuesi: ECOELER ELECTRIC INC