OSRAM Door LED with Motion Sensor Instruction Manual

1. Hyrje

The OSRAM Door LED is a versatile, battery-operated luminaire designed for both indoor and outdoor use. It features an integrated light and motion sensor for automatic illumination, providing targeted downward lighting. Its robust, weather-resistant design and easy installation make it suitable for various applications.

Karakteristikat kryesore:

• Prodhimi i dritës: 40 lm, 4000K cool white light, downward emission.
• Fleksibiliteti: Cordless operation with 3 AA batteries (included).
• Qëndrueshmëria: High-quality polycarbonate housing with IP54 protection rating, resistant to weather and impact.
• Sensori: Integrated passive infrared (PIR) motion and light sensor for automatic activation in darkness upon motion detection.
• Instalimi: Easy and quick mounting with included accessories (screws or adhesive).

2. Informacion mbi sigurinë

Ju lutemi lexoni me kujdes të gjitha udhëzimet e sigurisë përpara se të përdorni produktin. Ruajeni këtë manual për referencë në të ardhmen.

• This product is not a toy. Do not leave it unattended with children or allow children to use it.
• Not designed to replace conventional lighting in a private household.
• Paralajmërim për baterinë: Keep batteries out of reach of children. Ingestion can lead to chemical burns, perforation of soft tissues, and death. Severe burns can occur within 2 hours of ingestion. Seek immediate medical attention.
• Nëse ndarja e baterisë (nëse ka) nuk mbyllet mirë, ndaloni përdorimin e produktit dhe mbajeni larg fëmijëve.
• If you suspect batteries may have been swallowed or placed inside any part of the body, seek immediate medical attention.
• Shmangni:
• Maximum ambient temperature exceeding +35 °C.
• Replacing a battery with an incorrect type that may defeat a safeguard (e.g., in the case of some lithium battery types).
• Operating at altitudes above 2000 m.
• Disposing of a battery into fire or a hot oven, or mechanically crushing or cutting a battery, which can result in an explosion.

3. Përmbajtja e paketës

Ensure all components are present before installation:

• 1x OSRAM Door LED Down Sensor 4000K White Luminaire
• 3 bateri AA
• Mounting accessories (screws, adhesive)

4. Specifikimet

For detailed technical information, please refer to the official product page or contact OSRAM support.

5. Konfigurimi dhe instalimi

The OSRAM Door LED is designed for quick and flexible installation. It can be mounted using screws or adhesive.

5.1. Instalimi i baterisë

1. Locate the battery compartment on the back of the luminaire.
2. Hapni kapakun e ndarjes së baterisë.
3. Futni 3 bateri AA, duke siguruar polaritetin e saktë (+/-).
4. Securely close the battery compartment cover. Ensure it clicks into place to maintain IP54 rating.

Figure 1: Technical diagram illustrating battery insertion and product dimensions.

5.2. Opsionet e montimit

Choose a mounting location that provides optimal coverage for the motion sensor and desired illumination area. Consider entrances, hallways, patios, or balconies.

Option A: Screw Mounting

1. Hold the luminaire against the desired mounting surface and mark the screw holes.
2. Hapni vrima pilot nëse është e nevojshme, të përshtatshme për vidat e dhëna.
3. Secure the luminaire to the surface using the provided screws.

Option B: Adhesive Mounting

1. Clean the mounting surface thoroughly to ensure it is free of dust, grease, and moisture.
2. Apply the provided adhesive to the back of the luminaire.
3. Press the luminaire firmly against the desired surface for the recommended duration (refer to adhesive instructions if separate).

Figure 2: Product dimensions for mounting reference.

Figura 3: Shembample of the Door LED installed above an entrance, providing downward illumination.

Figure 4: The Door LED installed on an outdoor ceiling, demonstrating its discreet profile.

Figura 5: Ana nga afër view of the Door LED on a wall, highlighting the integrated motion sensor.

6. Udhëzimet e funksionimit

The OSRAM Door LED operates automatically using its integrated motion and light sensors.

• Aktivizimi automatik: The luminaire will automatically turn on when motion is detected in its sensing range and the ambient light level is low (darkness).
• Gama e sensorit: The passive infrared (PIR) sensor detects movement within its field of view. Ensure the sensor is not obstructed.
• Çaktivizimi: The light will turn off automatically after a short delay once no motion is detected and sufficient ambient light is present, or after a preset duration if in darkness.

Figure 6: The Door LED providing illumination on a staircase upon detecting movement.

Figure 7: The Door LED used as a night light in a child's room, demonstrating its versatility.

7. Mirëmbajtja

7.1. Ndërrimi i baterisë

When the light output diminishes or the device stops responding, it is time to replace the batteries.

1. Hapni ndarjen e baterisë siç përshkruhet në Seksionin 5.1.
2. Remove the old batteries and dispose of them responsibly according to local regulations.
3. Insert 3 new AA batteries, observing correct polarity.
4. Mbyllni mirë kapakun e ndarjes së baterisë.

Shënim: Always use high-quality AA batteries for optimal performance and longevity.

7.2. Pastrimi

To maintain the appearance and functionality of your luminaire:

• Fshijeni pjesën e jashtme me një të butë, damp pëlhurë.
• Do not use abrasive cleaners or solvents, as these can damage the polycarbonate housing.
• Ensure the motion sensor lens is clean and free of obstructions for proper operation.

8. Troubleshooting

Nëse problemi vazhdon pasi të provoni këto zgjidhje, ju lutemi kontaktoni mbështetjen e klientit.

9. Garancia dhe Mbështetja

For warranty information and customer support, please refer to the official OSRAM webfaqe ose kontaktoni shitësin tuaj.

Burimet në internet:

• Zyrtari i OSRAM Webfaqe: www.osram.com
• LEDVANCE Product Page (Manufacturer): ledvance.com/docs/4099854531439

Kur të kontaktoni mbështetjen, ju lutemi të keni gati numrin e modelit të produktit (4099854531439) dhe detajet e blerjes.