KING LPWV2715-CT24 Vandal Resistant Heater Instruction Manual

1. Produkti i Mbaruarview

The KING LPWV2715-CT24 is a robust, vandal-resistant electric heater designed for high-traffic and public areas such as detention facilities, public restrooms, and rest areas. Its heavy-duty construction, including a 3/16-inch solid steel frame and grill, provides exceptional durability against impact and abuse. Tamper-resistant screws secure the grill, and controls are recessed to prevent unauthorized access. This unit offers moderate wattage and high airflow to effectively heat entryways and hallways, preventing drafts from affecting the building's core temperature.

Imazhi 1: Përpara view of the KING LPWV2715-CT24 Vandal Resistant Heater, showcasing its robust metal casing and grill.

Karakteristikat kryesore:

• Impact/Vandal Resistant: Constructed with a heavy grill and 3/16-inch solid steel frame.
• Pic-A-Watt Elements: Allows for multiple wattage options to suit specific heating requirements.
• Tamper Resistant 3 Position Switch: Offers Fan, Heat, and Off settings, designed to prevent unauthorized adjustments.
• Mbrojtja nga mbinxehja: Integrated safety feature to prevent overheating.

2. Informacion mbi sigurinë

Read all instructions carefully before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

• Instalimi elektrik: This heater operates on 277 Volts and requires hardwiring. Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.
• Tokëzimi: This heater must be properly grounded to reduce the risk of electric shock.
• Vendndodhja: Do not install the heater in areas where gasoline, paint, or other flammable liquids are stored or used. Maintain proper clearances from combustible materials as specified in the installation section.
• Mbrojtja nga mbinxehja: The heater is equipped with a thermal cut-out to prevent overheating. If the heater shuts off due to overheating, allow it to cool down before attempting to restart. Investigate and correct the cause of overheating.
• Mos e mbuloni: Never cover the heater or block its air inlets/outlets. This can cause overheating and fire.
• Mirëmbajtja: Shkëputni energjinë elektrike përpara se të kryeni ndonjë mirëmbajtje ose pastrim.

3. Përmbajtja e paketës

Verifikoni që të gjithë përbërësit janë të pranishëm dhe të padëmtuar kur hapni paketimin:

• KING LPWV2715-CT24 Vandal Resistant Heater Unit
• Mounting Hardware (typically included)
• Manual udhëzimi (ky dokument)

Nëse ndonjë artikull mungon ose është dëmtuar, kontaktoni menjëherë furnizuesin tuaj.

4. Instalimi

PARALAJMËRIM: Installation must be performed by a qualified electrician. Disconnect all power to the circuit at the main service panel before attempting any wiring.

4.1 Vendndodhja e montimit

• This heater is designed for indoor, wall-mount installation.
• Choose a location that allows for proper air circulation and maintains required clearances from walls, ceilings, and floors. Refer to local codes for specific clearance requirements.
• Ensure the mounting surface is structurally sound to support the heater's weight (approximately 36 pounds).

4.2 Lidhja elektrike

• The LPWV2715-CT24 heater requires a dedicated 277 Volt, 60 Hz, single-phase circuit.
• Ngrohësi tërheq 5.4 Amps at 277V, providing 1500 Watts of heat. Ensure the circuit breaker and wiring are appropriately sized for this load.
• Connect the heater directly to the electrical supply using appropriate hardwiring methods and connectors, following the wiring diagram provided inside the heater's access panel.
• Sigurohuni që të gjitha lidhjet të jenë të forta dhe të sigurta.

5. Operacioni

Once properly installed and powered, the heater can be operated using its tamper-resistant 3-position switch.

5.1 Power Switch Settings

• FIKUR: The heater is completely off, and no heat or fan operation will occur.
• FANALIZIMI: The fan operates continuously without engaging the heating elements. This can be used for air circulation.
• Nxehtësia: The heating elements and fan operate to provide warmth. The heater will cycle on and off to maintain the desired temperature if connected to an external thermostat (not included).

5.2 Wattage Selection (Pic-A-Watt)

The LPWV series heaters feature Pic-A-Watt elements, allowing for field-adjustable wattage settings. Refer to the wiring diagram inside the heater for instructions on how to adjust the wattage to suit specific room requirements. This adjustment should only be performed by a qualified technician with power disconnected.

6. Mirëmbajtja

Regular maintenance ensures optimal performance and longevity of your heater. Always disconnect power at the circuit breaker before performing any maintenance.

• Pastrimi: Pastroni periodikisht pjesën e jashtme të ngrohësit me një sfungjer të butë.amp pëlhurë. Mos përdorni pastrues gërryes ose tretës.
• Hyrjet/Daljet e ajrit: Ensure that the air inlets and outlets are free from dust, lint, and other obstructions. Use a vacuum cleaner with a brush attachment to gently clean the grill and internal components if accessible.
• Inspektimi: Annually inspect the heater for any signs of damage, loose wiring, or unusual wear. If any issues are found, contact a qualified electrician for repair.

7. Troubleshooting

Përpara se të kontaktoni mbështetjen e klientëve, riview problemet dhe zgjidhjet e zakonshme të mëposhtme:

Nëse problemi vazhdon pasi të provoni këto zgjidhje, kontaktoni mbështetjen e klientit ose një elektricist të kualifikuar.

8. Specifikimet

9. Garancia dhe Mbështetja

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official KING webvend. Ruajeni faturën e blerjes si provë blerjeje për kërkesat e garancisë.

Prodhuesi: KING Electrical Manufacturing

Webfaqe: www.king-electric.com (P.sh.amplidhja, ju lutem verifikojeni zyrtarisht webfaqe)