DELL Command Configure Software User Manual

Shënime, paralajmërime dhe paralajmërime

SHËNIM: Një SHËNIM tregon informacione të rëndësishme që ju ndihmojnë të përdorni më mirë produktin tuaj.

KUJDES: NJ CA KUJDES tregon ose dëmtimin e mundshëm të pajisjes ose humbjen e të dhënave dhe ju tregon se si të shmangni problemin.

PARALAJMËRIM: NJË PARALAJMËRIM tregon një potencial për dëmtim të pronës, lëndim personal ose vdekje.

© 2025 Dell Inc. ose filialet e saj. Të gjitha të drejtat e rezervuara. Dell Technologies, Dell dhe marka të tjera tregtare janë marka tregtare të Dell Inc. ose filialeve të saj. Markat e tjera tregtare mund të jenë marka tregtare të pronarëve të tyre përkatës.

Introduction to Dell Command | Configure

Dell Command | Configure is a software package that provides BIOS configuration capability for Dell client systems. IT administrators can use this tool to configure BIOS settings and create BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI).

SHËNIM: Dell Command | Configure replaces Dell Client Configuration Toolkit version 2.2.1.

• Komanda Dell | Konfiguro 4.10.1 ose më vonë gjeneron një SCE 64-bit me kufizime.
• Dell Command | Configure 4.10.1 or later on a 64–bit ARM client machine, generates an ARM-based 64–bit SCE.

For more information, see the Dell Command | Configure 5.x User’s Guide on the Support | Dell site.

Temat:

• Versioni
• Audienca e synuar
• Qëllimi i dokumentit

Versioni

Ky kapitull jep një mbiview of the Dell Command | Configure version history, including release dates, supported operating systems, and compatible platform architectures to help you identify which version aligns with your system requirements.

Dell Command | Configure supports the following Windows operating systems:

• Windows 11
• Windows 10
• Mjedisi i parainstalimit të Windows (Windows PE)

The following table lists the available Dell Command | Configure versions along with their release dates, supported operating systems, and platform compatibility.

Tabela 1. Matrica e versionit

SHËNIM: Starting from the Dell Command | Configure 5.1.0 release, support for 32-bit systems has been discontinued.

Audienca e synuar

The installation guide for Dell Command | Configure is intended for IT professionals and system administrators. It offers comprehensive instructions for configuring BIOS settings and creating BIOS packages using both the Dell Command Configure User Interface (UI) and Command-Line Interface (CLI).

Qëllimi i dokumentit

This document provides instructions for installing and configuring BIOS settings and creates BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI) for efficient BIOS management.

Qasja në komandën Dell | Konfiguro instaluesin

Komanda Dell | Konfiguro instalimin file is available as a Dell Update Package (DUP) at Support | Dell. Follow these steps to download the DUP:

1. Shkoni te Mbështetja | Dell.
2. Nën Me cilin produkt mund t'ju ndihmojmë, futni në Shërbimi Tag e pajisjes suaj Dell të mbështetur dhe klikoni Paraqisni, ose kliko Zbuloni kompjuterin personal.
3. Në faqen Mbështetja e produktit për pajisjen tuaj Dell, klikoni Drejtuesit dhe Shkarkimet.
4. Klikoni Gjeni manualisht një drejtues specifik për ju [modeli].
5. Kontrollo Menaxhimi i Sistemit kutia e kontrollit nën Kategoria drop-down.
6. Gjeni Komanda Dell | Konfiguro in list and select Shkarkoni në anën e djathtë të faqes.
7. Gjeni atë të shkarkuar file në kompjuterin tuaj (në Google Chrome, file shfaqet në fund të dritares së Chrome) dhe ekzekutoni ekzekutuesin file.
8. Ndiqni udhëzimet në ekran.

Dell Command | Configure for Windows

This section provides details about the supported Windows versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Windows systems.

Temat:

• Sistemet operative të mbështetura për Windows
  
• Platformat e mbështetura
  
• Installing Dell Command | Configure on Windows systems
• Uninstalling Dell Command | Configure from Windows systems
• Upgrading Dell Command | Configure on Windows systems

Sistemet operative të mbështetura për Windows

Tabela 2. Sistemet operative të mbështetura

Platformat e mbështetura

Table 3. Supported platforms

Table 3. Supported platforms (continued)

SHËNIM: Platforms must support WMI-ACPI BIOS for full functionality.

SHËNIM: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell

Installing Dell Command | Configure on Windows systems

You can install Dell Command | Configure on Windows systems using either the Dell Update Package (DUP) or the MSI installer.
Both installers support standard and silent (unattended) installation modes.

SHËNIM: Microsoft .NET 4.8.1 or later must be installed on the client system to install Dell Command | Configure using the user interface.

SHËNIM: If User Account Control (UAC) is enabled on a Windows 10 system, silent mode installation is not allowed. Ensure that you have administrative privileges before installing Dell Command | Configure in silent mode.

Parakushtet

Before installing Dell Command | Configure, ensure the following:

• A supported Windows operating system is installed and running.
• Dell Command | Configure installation file is available (downloadable from Support | Dell).
• Administrator privileges are available on the system.
• Microsoft .NET 4.8.1 (for UI) and .NET 8.0 SDK (for Dell Command Secure BIOS Configuration Server) are installed.
• Microsoft Visual C++ Redistributable for Visual Studio 2022 is installed.
• WMI-ACPI compliant BIOS is available for full functionality.

SHËNIM:

• The system must be connected to a stable network when installing Dell Command | Configure with support for Dell Command Secure BIOS Configuration.
• On Windows 10 or later, enable Microsoft .NET Framework 4.8 or later version from the Aktivizoni ose çaktivizoni veçoritë e Windows ekran.
• The system has limited functionality if it does not have a WMI-ACPI compliant BIOS. Update the BIOS with a compatible version, if available. For more information, see Windows SMM Security Mitigations Table (WSMT) Compliance section in the Dell Command | Configure User’s Guide at Support | Dell.

Install Dell Command | Configure using DUP: Standard installation

To install Dell Command | Configure, run the Dell Update Package (DUP) with default settings. This method simplifies deployment and requires minimal user input.

1. Klikoni dy herë mbi DUP-in e shkarkuar, klikoni Po dhe më pas kliko INSTALL.
   Komanda Dell | Shfaqet magjistari i konfigurimit të instalimit.
2. Ekzekutoni magjistarin e instalimit.
   Për më shumë informacion, shihni Ekzekutimi i magjistarit të instalimit.

Install Dell Command | Configure using DUP: Silent installation

To install Dell Command | Configure silently, use the Dell Update Package (DUP) with command-line switches that suppress user prompts. This method enables automated, unattended installation.

1. Browse to the folder where you have downloaded the Dell Update Package (DUP) and open the command prompt.
2. Ekzekutoni komandën e mëposhtme:

Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.

NOTE: For more information about using commands, type any one of the following commands:

• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.
• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/?.

NOTE: During silent installation using DUP, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server.

Install Dell Command | Configure using MSI file: Standard installation

To install Dell Command | Configure, run the MSI file directly for a standard installation with default settings providing a simple and user-friendly setup process.

1. Klikoni dy herë mbi Paketën e Përditësimit të shkarkuar të Dell (DUP) dhe klikoni Po.
2. Klikoni EXTRACT.
   Shfaqet dritarja Browse For Folder.
3. Specify a folder location on the system, or create a folder to extract the files, and click OK.
4. te view e nxjerrë files, klikoni View Dosje
   Dosja përmban sa vijon files:
   ● 1028.mst
   ● 1031.mst
   ● 1034.mst
   ● 1036.mst
   ● 1040.mst
   ● 1041.mst
   ● 1043.mst
   ● 2052.mst
   ● 3076.mst
   ● Command_Configure.msi
   ● mup.xml
   ● package.xml
5. Për të hyrë në Komanda Dell | Konfiguro magjistarin e instalimit, kliko dy herë Command_Configure.msi.
6. Ekzekutoni magjistarin e instalimit.
   Për më shumë informacion, shihni Ekzekutimi i magjistarit të instalimit.
   After you install Dell Command | Configure , you can use the GUI or the CLI to configure the client systems. For more information about configuring the systems, see the following documents at Support | Dell:
   ● Dell Command | Configure Command-Line Interface Reference Guide
   ● Dell Command | Configure User’s Guide

Ekzekutimi i magjistarit të instalimit

To run the installation wizard for installing the Dell Command | Configure .msi file on your device:

1. Browse to the folder in which you have extracted the Command_Configure.msi or DUP file.
2. Right-click the .msi or DUP and click Run as administrator.
   Shfaqet magjistari i instalimit.
3.  Kliko Next.
   Shfaqet ekrani i Marrëveshjes së Licencës.
4. Lexoni marrëveshjen e licencës dhe klikoni I pranoj kushtet në marrëveshjen e licencës dhe më pas klikoni Next.
   Shfaqet ekrani i Informacionit të Klientit.
5. Type the username and organization, select one of the following options, and then click Next.
   ● For multiple users, select Anyone who uses this computer (all users).
   ● For a single user, select Only for me (Dell Computer Corporation).
   Shfaqet ekrani i konfigurimit të personalizuar.
6. Klikoni Next për të instaluar Dell Command | Konfiguro CLI dhe GUI në drejtorinë e paracaktuar. Komanda e paracaktuar e Dell | Konfiguro drejtoritë e instalimit janë:
   ● For 32-bit systems, C:\Program Files\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configure.
   Shfaqet ekrani Gati për të instaluar programin.
7. Klikoni Po.
   The Installing Dell Command | Configure screen is displayed. When the installation completes, the installation wizard- completed screen is displayed.
8. Klikoni Finish.
   Nëse Komanda Dell | Konfiguro GUI është instaluar me sukses, shkurtore për GUI shfaqet në desktop.

Install Dell Command | Configure using .msi file: Silent installation

You can seamlessly install Dell Command | Configure in silent mode using the .msi file, leveraging command-line parameters for efficient deployment.

SHËNIM: Dell Command | Configure silent mode installation supports installing the Dell Command Secure BIOS Configuration Server, but it does not support the Dell Command | Configure option.

SHËNIM: By default, during silent installation using the .msi file, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server. To install DCC with DCSBC server, use the following command: msiexec.exe /i Command_Configure.msi DCSBC=1 /qn

1. Shkoni te dosja ku Dell Command | Instaluesi i konfigurimit është nxjerrë nga Paketa e Përditësimit të Dell (DUP).
2. Open Command Prompt as administrator.
3. Ekzekutoni komandën e mëposhtme: msiexec.exe /i Command_Configure.msi /qn
   Komanda Dell | Komponentët e konfigurimit instalohen në heshtje në vendet e mëposhtme:
   ● For 32-bit systems, C:\Program Files\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configure.

Instalimi me gjuhët e mbështetura

To assess silent and unattended with supported languages, run the following command: msiexec /i Command_Configure.msi TRANSFORMS=1036.mst.

To specify the installation language, use the command-line option TRANSFORMS=<language ID>.mst, where <language ID> corresponds to one of the following:

• 1028 - Tajvani kinez
• 1031 - gjermanisht
• 1033 - Anglisht
• 1034 - Spanjisht
• 1036 - Frëngjisht
• 1040 - italisht
• 1041 - japonez
• 1043 - Holandisht
• 2052 - Kineze e thjeshtuar
• 3076 - Hongkong kinez

SHËNIM: If the specified language or the default operating system language is not supported, the installation defaults to English.

Uninstalling Dell Command | Configure from Windows systems

To uninstall Dell Command | Configure, use the Control Panel to remove the application from Windows ensuring clean removal without affecting system settings.

1. Hapni Paneli i kontrollit.
2. Shko tek Programet > Programet dhe veçoritë.
3. Find Dell Command | Configure në listë.
4. Right-click it and select Çinstaloni.
5. Follow the on-screen prompts to complete the uninstallation.

Upgrading Dell Command | Configure on Windows systems

You can upgrade Dell Command | Configure using a Dell Update Package (DUP) or the .msi file.

SHËNIM: Microsoft .NET Framework 8.0 or later must be installed on the client system to ensure a successful Dell Command | Configure user interface installation.

SHËNIM: If Windows User Account Control (UAC) is enabled on Windows 10 and 11 systems, you cannot install Dell Command | Configure in silent mode. Ensure that you have an administrative privilege before installing Dell Command | Configure in silent mode.

SHËNIM: This system does not have a WMI-ACPI compliant BIOS, so the limited functionality is available. Update the BIOS with a compatible version, if available. For more information, see Dell Command | Configure 5.x Release Notes at Support | Dell.

SHËNIM: You cannot install and upgrade Dell Command | Configure on non-WMI-ACPI in silent mode.

Upgrade Dell Command | Configure using DUP file

Kryeni hapat e mëposhtëm për të përmirësuar Dell Command | Konfiguro (dikur Dell Client Configuration Toolkit) në versionin tjetër:

1. Double-click the downloaded DUP, and then click INSTALONI.
   Komanda Dell | Hapet magjistari i konfigurimit të instalimit.
2. Ekzekutoni magjistarin e instalimit dhe ndiqni udhëzimet që shfaqen në ekran.

Upgrade Dell Command | Configure using .msi file

To upgrade Dell Command | Configure, uninstall the existing version and install the new version using the .msi installer ensuring a clean upgrade with the latest features and fixes.

1. Shkarko instalimin më të fundit file Dell-Command-Configure-
   Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE from Support | Dell.
2. Extract the installation using any of the following:
   ● From the folder where you extracted the file, double-click the Dell_Command_Configure.msi file
   ● From the command prompt, browse to the directory where you extracted the file, dhe më pas ekzekutoni komandën e mëposhtme:
   msiexec.exe /i Command_Configure.msi REINSTALL=ALL REINSTALLMODE=VOMUS
   SHËNIM: Shfaqet ekrani i magjistarit të instalimit i ndjekur nga "Një version më i vjetër i Dell Command | Konfigurimi zbulohet në këtë sistem. Nëse vazhdoni, instaluesi do të heqë versionin e vjetër dhe do të vazhdojë të instalojë versionin më të fundit. Nëse anuloni instalimin e versionit më të fundit, sistemi nuk do të rikthehet në versionin e mëparshëm të Dell Command | Konfiguro. Doni të vazhdoni?" mesazh.
3. Ndiqni udhëzimet në ekran për ta përmirësuar.
   SHËNIM: Për një përmirësim të heshtur, ekzekutoni komandën e mëposhtme: msiexec /i Command_Configure.msi REINSTALL=ALL REINSTALLMODE=vmous REBOOT=REALLYSUPPRESS /qn
   NOTE: If a previous version of Dell Command | Configure is installed in a non-default directory, you cannot upgrade to the latest Dell Command | Configure version. In this case, uninstall the existing version and assess fresh installation of the latest version.

Përmirësimi në dosjen e paracaktuar

To upgrade Dell Command | Configure, run a command from the extracted DUP folder to silently install the update in the default directory.

1. Shfletoni dosjen në të cilën keni nxjerrë Dell Command | Konfiguro instaluesin nga Dell Update Package (DUP).
2. Ekzekutoni komandën e mëposhtme: msiexec.exe /i Command_Configure.msi /qn
   Komanda Dell | Komponentët e konfigurimit instalohen në heshtje në vendet e mëposhtme:
   ● For 32-bit systems, C:\Program Files (x86)\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configure.

Dell Command | Configure for Linux

This section provides details about the supported Linux versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Linux systems.

Temat:

• Supported operating systems for Linux
• Supported Platforms for Linux
• Installing Dell Command | Configure on Linux systems
• Uninstalling Dell Command | Configure on Linux systems
• Upgrading Dell Command | Configure for systems running on Linux

Supported operating systems for Linux

Tabela 4. Sistemet operative të mbështetura

Supported Platforms for Linux

Table 5. Supported platforms

SHËNIM: Platforms must support WMI-ACPI BIOS for full functionality.

SHËNIM: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell.

Installing Dell Command | Configure on Linux systems

To install Dell Command | Configure on Linux, download the appropriate .deb or .rpm package from Dell Support and use your package manager to install it enabling CLI-based BIOS configuration on supported Dell systems.

SHËNIM:

• Dell Command | Configure user interface is not supported on systems running the Linux operating system.
• Dell Command Secure BIOS Configuration(DCSBC) is not supported on systems running the Linux operating system.

You can install the Dell Command | Configure for Red Hat and Debian-based linux distributions, by following these steps:

1. Go to Support | Dell, download the tar.gz file.
2. SHËNIM:
   ● If you have downloaded the package for Red Hat Enterprise Linux, the RPMs are included in the package.
   ● If you have downloaded the package for Ubuntu Desktop, the Debians are included in the package.

Install the RPMs or Debians as appropriate for your system.
Rruga e parazgjedhur e instalimit është /opt/dell/dcc.

Parakushtet

• Stacioni i punës duhet të funksionojë në një sistem operativ Linux të mbështetur.
• Shkarkoni bibliotekat openSSL 1.x për të instaluar dhe ekzekutuar Dell Command | Konfiguro në Red Hat Enterprise Linux 8 dhe Ubuntu Desktop 20.04.
• Download openSSL 3.x libraries to install and run Dell Command | Configure on Red Hat Enterprise Linux 9, Ubuntu Desktop 22.04, and Ubuntu Desktop 24.04.

Install Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To install Dell Command | Configure on Red Hat Enterprise Linux 8 or 9, download the RPM package from Dell Support and install it using the command line.

1. Nga dell.com/support, Download the command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz file from Support | Dell .
2. Untar the file duke përdorur komandën e mëposhtme:

tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz

To install Dell Command | Configure on systems running Red Hat Enterprise Linux 8 or 9 systems using 64-bit RPMs, run the commands in the following order:

rpm —ivh srvadmin-hapi-<version number>.el8.x86_64.rpm

rpm —ivh command-configure-<version number>-<Build Number>.<RHEL Version>.<architecture>.rpm

Installing Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04

To install Dell Command | Configure on supported Ubuntu versions, download the DEB package from Dell Support and install it using the command line. See Accessing Dell Command | Configure installer.

1. Download the command_configure-<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz from Support | Dell.
2. Untar the file using the following command: tar -xvzf command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz
   The installer command-configure_<version><Build Number>.<Ubuntu
   Versioni>_ .tar.gz përmban paketat e mëposhtme që duhet të instalohen në rendin e mëposhtëm:
   ● srvadmin-hapi_<version number>_amd64.deb
   ● command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
3. To install HAPI, run the following command: dpkg -i srvadmin-hapi_<version number>_amd64.deb
   SHËNIM: If the installation on Ubuntu fails due to dependency issues with libc, ensure that you upgrade the system by running the following command:
   apt-get -f instaloj
4. To install Dell Command | Configure, run:
   dpkg -i command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
   Rruga e parazgjedhur e instalimit është /opt/dell/dcc.
   SHËNIM: If the installation on Ubuntu fails due to dependency problems libc, then ensure to upgrade the system using apt-get upgrade command:
   apt-get -f instaloj

Uninstalling Dell Command | Configure on Linux systems

To uninstall Dell Command | Configure on Linux, run the appropriate RPMs for your system to remove the installed package (rpm or deb) based on your distribution removing the application and its components.

SHËNIM: Uninstalling or upgrading Dell Command | Configure on systems running supported Linux operating systems leave empty files and folders on the system. These residual files and folders do not affect system functionality.

Uninstall Dell Command | Configure from Red Hat Enterprise Linux 8 and 9

Për të çinstaluar Dell Command | Konfiguroni në sistemet që ekzekutojnë Red Hat Enterprise Linux 8 ose 9, ekzekutoni komandat në rendin e mëposhtëm:

rpm -e command-configure-<version>-<build number>.el8/9.x86_64

rpm -e srvadmin-hapi- .el8.x86_64

Uninstall Dell Command | Configure from Ubuntu Desktop

You can uninstall Dell Command | Configure and dependent packages on systems running Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

SHËNIM: You must uninstall Dell Command | Configure before uninstalling the dependent packages.

1. Për të çinstaluar Dell Command | Konfiguro dhe hiq konfigurimin files dhe të përkohshëm files, run the following command: dpkg –purge command-configure
2. Për të çinstaluar Hapi dhe për të hequr konfigurimin files dhe të përkohshëm files, run the following command: dpkg –purge srvadmin-hapi
3. To verify that the Dell Command | Configure is uninstalled in your system, run the following command: dpkg –l | grep command-configure
   If Dell Command | Configure details are not displayed, then the uninstallation is successful.

Upgrading Dell Command | Configure for systems running on Linux

You can upgrade Dell Command | Configure on Linux, uninstall the existing version and install the latest package.

1. Download the Dell Command | Configure .tar.gz file from Support | Dell and save it on your system.
2. Përmirësoni versionin e Dell Command | Konfiguro në sistem.

SHËNIM: Uninstalling and upgrading Dell Command | Configure on systems running supported Linux operating systems leaves empty files dhe dosjet në sistem. Të files dhe dosjet nuk kanë ndonjë ndikim funksional.

Upgrade Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To upgrade Dell Command | Configure on Red Hat Eenterprse Linux 8 or 9, uninstall the current version and install the latest RPM package.

1. Download the command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz file from Support | Dell.
2. Untar the file using the following command: tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz

To upgrade Dell Command | Configure on computers running Red Hat Enterprise Linux 8 or 9 computers using 64-bit RPMs, run the commands in the following order:

rpm -Uvh –nodeps srvadmin-hapi- . .x86_64.rpm

rpm —Uvh command-configure-<version>-<build number>.<RHEL Version>.x86_64.rpm

Upgrade Dell Command | Configure on Ubuntu Desktop

To upgrade Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

1. Download the command_configure-linux-<version>-<build number>.tar.gz from Support | Dell.
2. Untar the file using the following command: tar -zxvf command-configure_<version>-<build number>.<Ubuntu Version>_amd64.tar.gz
3. Për të përmirësuar, ekzekutoni komandën e mëposhtme:
   dpkg -i srvadmin-hapi_<version number>_amd64.deb
   dpkg -i command-configure_<version>-<build number>.<Ubuntu Version>_amd64.deb
4. Për të verifikuar komandën aktuale të Dell | Konfiguro versionin, shkoni në shtegun e instalimit të paracaktuar dhe ekzekutoni:
   ./cctk –version

Advanced Dell Command | Configure installation scenarios

Ky kapitull jep një mbiview of advanced installation scenarios for Dell Command | Configure, including secure BIOS configuration and installation in the Windows Preinstallation Environment (Windows PE). These scenarios ensure robust system management and deployment capabilities.

Temat:

• Installing Dell Command | Configure for Dell Command Secure BIOS Configuration
• Dell Command | Configure for Windows Pre installation Environment.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration

Hardware Security Module (HSM) is used as a signing method for the Dell Command Secure BIOS Configuration workflow.

SHËNIM: Dell Command Secure BIOS Configuration(DCSBC) is not compatible with ARM64-bit systems.

Parakushtet

Dell Command Secure BIOS Configuration with Dell Command | Configure allows you to use any Hardware Security Module vendor to sign the Dell Command Secure BIOS Configuration Server ngarkesat e dobishme.

Sigurohuni që të përmbushen kërkesat e mëposhtme:

• HSM Setup and OpenSSL: Ensure that you have set up your Hardware Security Module (HSM) provider in your environment. It is recommended to use OpenSSL as the open-source signing tool to generate signatures, which can then be used by Dell Command | Configure.
• Update HSMSigning.bat File: You must update the HSMSigning.bat file with a command compatible with your HSM setup. This file is at: C:\Program Files (x86)\Dell\Command Configure\X86_64\HSMSigning.bat. Modify the signature generation command in line 12 according to your HSM provider requirements. The default command is: “%OpensslPath%\openssl.exe” dgst -sha256 -sign “%ObfuscatedKeyPath%\%PrivateKeyName%” -out “%outlocat%\blobsignature.txt” %1 . Ensure that the command you provide generates the signature in the same path as specified in the default command, with the filename set as blobsignature.txt. Do not modify the last option %1, as it allows the signature command to accept the payload file that is generated by Dell Command | Configure during runtime for signing.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration Server

To install Dell Command | Configure for use with the Secure BIOS Configuration Server, download the appropriate installer package and follow the setup instructions to enable remote BIOS configuration and policy enforcement.

1. Run Command_Configure.msi from Power Shell in administrator mode.
   Shfaqet magjistari i instalimit.
2. Select the Dell Command Secure Bios Configuration Server option.
3. Kliko Next.
4. Kliko Instalo për të filluar instalimin.
   The installation completion wizard is displayed.
5. Klikoni Finish për të përfunduar instalimin.
   The Dell Secure Configuration Service is created and initiated in the Windows Services tab.
   SHËNIM: To run Dell Secure Configuration on a particular port, the port must be updated to the appsettings.json file në URL line. Locate the following path: C:\Program Files (x86)\Dell\Command Configure\ABIWindowsService\appsettings.json.
   SHËNIM: The start time for Dell Command Secure BIOS Configuration varies depending on the platforms—the maximum time limit is set to 2-3 minutes.

Configuring the Dell Command Secure BIOS Configuration Server using HTTPS

The Dell Command | Configure installer configures the Dell Command Secure BIOS Configuration Server for HTTP calls. For added security, you can also configure the Dell Command Secure BIOS Configuration Server using HTTPS on the system where Dell Command Secure BIOS Configuration is installed, by following these steps:

1. Press the Windows key and press the R key to launch the Run dialog box.
2. Type Services.msc and then press Enter to open Windows Services.
3. Locate Dell Secure Configuration Service.
4. Right-click Dell Secure Configuration Service, and click Stop.
5. Go to the Dell Command | Configure installation path C:\Program Files (x86)\Dell\Command
   Configure\ABIWindowsService\appsettings.json, and modify the appsettings.json file me sa vijon:
   {
   “Logging”: {
   “LogLevel”: {
   “Default”: “Information”,
   “Microsoft.Hosting.Lifetime”: “Information”
   }
   },
   “Kestrel”: {
   “Endpoints”: {
   “HttpsInlineCertFile”: {
   “Url”: “< URL:Port>”,
   “ClientCertificateMode”: “AllowCertificate”,
   “Certificate”: {
   “Path”: “<Https certificate complete path>”,
   “Password”: “<Https Cert Password>”
   }
   }
   }
   }
   }
   SHËNIM: The certificate to be provided must be associated to the Url specified in the same field. Also, specify the Client Certificate Modeas Allow Certificate to allow Dell Command Secure BIOS Configuration server to function without any issues. You must specify the complete Path for the Https certificate and the Password for authenticating the Https Certificate. The Password can be left empty if the Https certificate does not require a password authentication.
6. Save changes to the appsettings.json file and start the Dell Secure Configuration Service from Windows Services.
   SHËNIM: There are other ways as well to configure an HTTPS Server. For more details, see Configure endpoints for the ASP.NET Core Kestrel web server and Client Certificate Mode Enum.

Dell Command | Configure for Windows Preinstallation Environment

Windows Preinstallation Environment (WinPe) provides a stand-alone preinstallation environment that is used to prepare a system for Windows installation. For client systems that do not have an operating system that is installed, you can create a bootable image that contains Dell Command | Configure to run the Dell Command | Configure commands on Windows PE. To create Windows PE 10.0, and Windows PE 11.0 images, you can use Windows Assessment and Deployment Kit (Windows ADK).

Using Windows PE 10.0, and Windows PE 11.0, you can integrate Dell Command | Configure.

SHËNIM: Dell Command | Configure 5.x for Windows Preinstallation Environment is not compatible with ARM64-bit systems.

Krijimi i një mjedisi të parainstalimit të imazhit të bootable duke përdorur Windows PE 10.0 dhe 11.0

To create a bootable image using Windows PE 10.0 or 11.0, use the Windows ADK to generate a customized Windows PE environment, then add the necessary tools and drivers before creating a bootable ISO or USB. This environment supports preinstallation tasks such as BIOS configuration and OS deployment.

1. Nga Microsoft webfaqe, shkarkoni dhe instaloni Windows ADK në sistemin e klientit.
   SHËNIM: Gjatë instalimit, zgjidhni vetëm Mjetet e vendosjes and Windows Preinstallation Environment (Windows PE).
2. From Support | Dell, download and install Dell Command | Configure.
3. Instaloni Dell Command | Konfiguro.
4. Integrimi i komandës Dell | Konfiguro strukturën e drejtorisë në një ISO file për të krijuar një imazh ISO të bootable.

Integrimi i komandës Dell | Konfiguro strukturën e drejtorisë në një ISO file using Windows PE 10.0/11.0

To integrate the Dell Command | Configure directory into an ISO, copy it to the Windows PE working folder and create the Windows PE 10.0/11.0 image.

1. Instaloni sistemin operativ Windows 11.
2. Download and install Windows ADK for Windows 10/11 operating system.
3. Create a Windows PE 10.0/11.0 image.

Creating a Windows PE 10.0/11.0 image

1. Browse to the following location:.
   ● For 32-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86.
   ● For 64-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86_64.
2. Hapni vijën e komandës me privilegjet e administratorit.
3. Run the following command: .
   ● Windows PE 10.0
   ○ For 32-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   ● Windows PE 11.0
   ○ For 32-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   SHËNIM: Sigurohuni që rruga që përdoret në komandë është ajo e Dell Command | Konfiguro dosjen.
4. Copy the ISO image to the following location:
   ● For 32-bit systems, C:\winpe_x86\WIM.
   ● For 64-bit systems, C:\winpe_x86_64\WIM.

Burimet dhe mbështetja

Ju mund të përdorni dokumentet e kërkuara duke zgjedhur produktin tuaj.

1. Shko tek Ndihmë | Dell.
2. Klikoni Shfletoni të gjitha produktet.
3. Klikoni Software & Solutions.
4. Klikoni Menaxhimi i Sistemeve të Klientit.
5. Klikoni Dell Command | Configure.
6. Klikoni Select This Product.
7. te view dokumentet e kërkuara, klikoni emrin e kërkuar të produktit dhe numrin e versionit.

SHËNIM: Nëse nuk keni një lidhje aktive në internet, mund të gjeni informacionin e kontaktit në lidhje me faturën e blerjes, fletën e paketimit, faturën ose katalogun e produkteve të Dell.

Dell provides several online and telephone-based support and service options. Availability varies by country or region and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues:

1. Shkoni te Mbështetja | Dell.
2. Zgjidhni kategorinë tuaj të mbështetjes.
3. Verifikoni vendin ose rajonin tuaj në Zgjidhni një Shtet/Rajon lista zbritëse në fund të faqes.
4. Zgjidhni shërbimin ose lidhjen e duhur të mbështetjes bazuar në nevojën tuaj.

Dokumentet / Burimet

DELL Command Configure Software [pdf] Manuali i Përdoruesit Command Configure Software, Configure Software, Software

Referencat

• Manuali i Përdoruesit