MULTIBRACKETS 5605 Wall Bracket

Specifikimi

• Produkti: MULTIBRACKETS 5605 Universal Wall Bracket / Long Reach Arm Mount
• Lloji: Full-motion articulating TV wall mount (dual arm long-reach swivel)
• Ngjyra: Me përfundim metalik të zi
• Materiali: Heavy-duty solid steel construction
• Përputhshmëria e ekranit: Fits most flat-panel TVs 65″ – 110″ diagonal
• Max screen diagonal: ~279 cm (110″)
• Kapaciteti i peshës: Up to 125 kg (~275 lbs) load support
• Mbështetja VESA: Compatible with most VESA patterns from 100×100 mm up to 800×600 mm
• Movement & Adjustment: Full-motion swivel, tilt, and rotate at multiple pivot points
• Gama e animit: approx. -5° to +10°
• Swivel/rotation: approximately 60° to +60°
• Extension from wall: up to 980 mm (~38.6″)
• Karakteristikat:
  • Dual long-reach arms for flexible viewpozicionet ing
  • Smart cable management system to hide cables
  • Partially pre-assembled with a full hardware kit included
• Lloji i instalimit: Wall mount, articulating bracket
• Ngjyra: E zezë

E RËNDËSISHME!
Your Plasma. LCD. TV, Projector, Projector Screen, or other HiFi equipment represents a considerable value.
If screws are Included they may not be suitable for the material of your wall, ceiling, or floor. Replace the screws with suitable ones if needed.
In case you are unsure regarding any aspects or the mounting of this product,t please
Konsultohuni me një profesionist.

Paralajmërim!
Gjithmonë kontrolloni të thellësia of të vrima përpara duke filluar an instalimi.

Fits most 65″-110″ flat panel TV

• Weight capacity: 125kg/275 lbs
• VESA compliance: 100×100 200×200 300×300 400×200 400×400 600×400 800×600

PARALAJMËRIM 
Lëndime të rënda personale dhe dëmtime pronësore mund të rezultojnë nga instalimi ose montimi jo i duhur. Lexoni me kujdes paralajmërimin e mëposhtëm përpara se të filloni.

• Produktet duhet të instalohen nga profesionistë.
• Nëse nuk i kuptoni udhëzimet ose keni ndonjë shqetësim ose pyetje, ju lutemi kontaktoni një instalues ​​të kualifikuar lokal.
• Mos instaloni ose montoni nëse produkti ose pajisja është e dëmtuar ose mungon. Nëse keni nevojë për pjesë këmbimi, ju lutemi kontaktoni shpërndarësin tuaj lokal për ndihmë.
• This product fits most65″-11D”LCD and plasma screens; maximum weight of LCD /plasma screen: 125kg.
• This product has been designed for use on masonry (solid concrete, 2000 PSI density minimum).
• For safe installation. The wall you are mounting to must support a minimum of 3 times the weight of the total load (the mount, the TV, and all accessories).
• Mos e përdorni këtë produkt për ndonjë aplikim tjetër nga ai i projektuar fillimisht.
• This product contains moving parts; please use it with caution.
• When installing a flat panel display, please do not damage the electrical wiring or the power source.
• Prodhuesi nuk do të mbajë asnjë përgjegjësi për montimin në mur vertikal, ose për dëmtimet e rastësishme ose pasuese që lindin prej tyre.
• Prodhuesi mohon çdo përgjegjësi për modifikimet, instalimin e gabuar ose instalimin mbi diapazonin e peshës së specifikuar.
• The manufacturer will not be liable for any damages arising out of the use of, or inabilityto use, the product.

Lista e kaluar

INSTALIMI

INSTALLATION OPTION 1: Wood Stud Installation (Suitable for 16″ or 24″ apart studs)

1. Use a stud finder to locate the drywall studs and mark the desired installation locations with a pencil.
2. Bashkangjisni shabllonin e pllakës së murit (BB) në mur në vendin e dëshiruar të instalimit.
3. Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level, and mark 6 lag bolt installation locations on the stencil and the wall. Attempt to locate the lag bolt locations in the middle of the studs.
4. Use a 7/32″ (5.5mm) drill bit to drill a pilot hole in the wall with a depth of at least 2.6″ (65mm).

Please note that failure to drill pilot holes may result in the lag bolt heads snapping during installation.

Secure the Wall Plate to the wall with 6 x Lag Bolts ( H) and 6 x Washers (H).

SHËNIM: Do not use Wall Anchor (I) for wood stud installation.

OPTION INSTALIMI 2: Instalimi i murit prej betoni/tulla

1. Bashkangjisni shabllonin e pllakës së murit (BB) në mur në vendin e dëshiruar të instalimit.
2. Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level, and mark 6 lag bolt installation locations on the stencil and the wall.
3. Use a 3/8″ (10 mm) drill bit to drill a pilot hole in the wall with a depth of at least 2.6″ (65mm). Please note that failure to drill pilot holes may result in the lag bolt heads snapping during installation.

Futni 6 x spiranca muri (I) në vrima. Sigurojeni pllakën e murit në mur me 6 x bulona me vonesë (H) dhe 6 x rondele (H).

This full motion TV wall mount comes with a sliding mechanism that allows the arms and the TV to slide horizontally left or right for up to 15. 7 inches, while the wall plate is stationary on the wall. This feature allows the TV to be placed at an optimal position, regardless of the position of the wall studs. The mount will ship with the locking bars installed in place at their center position. If the sliding function will be used, take off the locking plates by removing the bolts that hold them in place.

Place the top locking bar at the desired position to fix the left slide limit of the arms, and place the bottom bar at the desired position to fix the right side limit of the arms. The raised metal piece at the end of the locking bars limits the slide of the arms. Ensure the locking bars are oriented correctly to ensure both the left and right side locking bars correctly limit the slide. Ensure both of the bolts are tightened at each locking bar’s position to prevent the arms from sliding off the wall plate.

PARALAJMËRIM: FAILURE TO INSTALL THE LOCKING BARS ADEQUATELY MAY RESULT IN THE ARMS AND THE TV FROM SLIDING OFF THE WALL PLATE.

Attaching the TV to the Mount (For Displays With Smaller Bolt Hole Patterns)
For TVs with smaller bolt hole patterns of VESA 100×100, 100×200, 200×100, and 200x200mm, the TV can be mounted directly on the plate, without the extension bars.

Lidhja e televizorit me montimin (për ekranet me modele më të mëdha vrimash bulonash) Për televizorët me modele më të mëdha të vrimave të bulonave të VESA 300×300,400×200,400×400,600×400, 800×600 mm, përdorni kllapat e televizorit dhe shufrat shtesë për të instaluar TV në mal.

Attach the 2 x TV Brackets to the back of the TV by using screws A+E, B+E, C+E, or Dor G.

SHËNIM: The hardware packet provided fits most TVs in the market. If your TV requires different hardware, please contact us at mount-it.com to procure additional hardware kits.

Ensure the screws are adequately engaged with the screw holes on the TV.
Do not overtighten the screws. Ensure the TV brackets sit flat with the back of the T.V.

Hangina g TV On The Wall Mount Arms

Lift the TV (two persons recommended) and hang the TV brackets onto the wall mount extension bars.

Sigurimi i televizorit në mal

Secure the TV brackets on the mount by attaching the 4 x AA Safety Brackets with 4 x F Screws as shown ointhe image.

SHËNIM: Dështimi për të siguruar kllapat e televizorit në montimin me kllapa sigurie AA mund të rezultojë në heqjen aksidentale të televizorit nga shufrat zgjatuese, duke rezultuar ndoshta në dëmtime trupore ose pronësore.

Rregullimi i nivelimit -5° – +5°
The mount allows up to 5 degrees of leveling adjustment post installation. To adjust the level of the TV, place a bubble level on top of the TV, loosen the 2 x G bolts located behind the VESA plate, level the TV, and tighten the 2 x G bolts to lock the TV in position.

Rregullimi i pjerrësisë -5° – +10°

The mount can tilt down up to 10 degrees and up 5 degrees. To adjust the tilt angle of the TV, pull out the tilt adjustment levers on both sides of the mount and turn counterclockwise to loosen the screws. Adjust the tilt to the desired angle and turn the tilt adjustment lever clockwise to tighten the screws.

SHËNIM: IF THE TV TILTS DOWN AFTER A PERIOD OF USE, CHECK THE TILT ADJUSTMENT LEVER TIGHTNESS AND TIGHTEN IF NECESSARY.

Përdorni kapëset e integruara të menaxhimit të kabllove në krahë për të drejtuar kabllot në pjesën e pasme ose anësore të televizorit.

Dimensioni

KARTELA E GARANCISE

SHTETE SHUM “™ I kufizuar Garancia

Shumëkllapa mandatet e saj produkteve te be falas of defektet in material dhe mjeshtëri për të të produktit Garancia Periudha.

Të Garancia periudhë fillon on të origjinale blerjen datë of të produkt

Të gjitha Shumëkllapa produkteve janë mbuluar by a kufizuar produkt garancion

• PESË (5) vjet për metalike video monitoruar mounts, të gjitha raftetdhe non-electrical raft aksesorë
• DY (2) vjet për gaslifts dhe sit-stand stacionet e punës
• NJË (1) vit për të gjitha i motorizuar dhe/ose i automatizuar produkte, plastike folësi mounts, të gjitha folësi stands, të gjitha mobilje, të gjithadruri (MDF) aksesorë

Për garancion pretendimet bërë gjatë të Garancia Periudha, MULTIKllapa do zëvendësojnë ndonjë me të meta produkt pjesë falas of charge. Should a pjesë on juaj Shumëkllapa produkt fail, ju lutem krijojnë anRMA rasti on www.multibrackets.com/support te bëjnë a garancionpretendim. We do await juaj dokumentacionin dhe pastaj discuss tëproblem me ti, dhe një herë we confirm të produkt is nën lufteranty, we do anije zëvendësim pjesët te ju. Kjo I kufizuar Garanciabën jo mbulesë të shpenzimet of duke hequr dhe duke zëvendësuar me të meta pjesëtnga juaj Shumëkllapa produkt. Pra, if juaj problem kërkon ariparimin technician, ju duhet paguaj ndonjë punës akuzat.

For warranty claims made during the Warranty Period, MULTI BRACKETS will replace any defective product part free of charge. Should a part of your Multibrackets product fail, please create an RMA case on www.multibrackets.com/support to make a warranty claim. We will await your documentation and then discuss the problem with you, and once we confirm the product is under warranty, we will ship replacement parts to you. This

Limited Warranty does not cover the costs of removing and replacing defective parts from your Multibrackets product. So, if your problem requires arepair technician, you must pay any labor charg.es This Limited Warranty extends only to the original purchaser of the product and is automatically void if your Multibrackets product is modified in any way, improperly installed, taxed beyond its stated weight capacity, or otherwise misused or abused.

All Multibrackets products are intended for indoor use only, and any outdoor use voids this Limited Warranty. The Limited Warranty for wall and ceiling mounts is void if the mount is moved from its initial installation. To the maximum extent permitted by applicable law, Multibrackets disclaims any other warranties, express or implied, including warranties of fitness for a particular purpose and warranties of merchantability. Multibrackets will not be liable for any damages whatsoever arising out of the use or inability to use itsproducts, even if Multibrackets has been advised of the possibility of such damages. To the maximum extent permitted by applicablelaw, Multibrackets disclaims any responsibility for incidental or consequential damages,

Multibrackets M Stockholm, Sweden 2016. www.shumëkllapa.com

The content of this manual is subject to Change wltheut further notice. The latest vers, on of this manual can be found online under the product name on the webfaqe: www.multibrackets.com

 

Dokumentet / Burimet

MULTIBRACKETS 5605 Wall Bracket [pdfUdhëzuesi i instalimit 5605 Wall Bracket, 5605, Wall Bracket, Wall Bracket, Wall, Bracket

Referencat

• Manuali i Përdoruesit